Abbasi, Pourya Analysis of effective parameters on cadmium cementation reaction from the perspective of diffusion [Volume 6, Issue 2, 2020, Pages 81-93]
Abbasian, Ahmad Reza Preparation and application of meso-adsorbent NiFe2O4 for the ultrasound-enhanced removal of dye pollutant in water and wastewater: A multivariate study [Volume 6, Issue 2, 2020, Pages 103-111]
Abbasian, Ahmad Reza Single-stage solution combustion preparation of ZnFe2O4-ZnS nanoparticles as dye adsorbent: Effect of fuel to oxidant and Zn to Fe molar ratios [Volume 6, Issue 2, 2020, Pages 113-122]
Abbasian, Ahmad Reza Preparation of pure cordierite through heat treatment of combustion synthesized magnesium aluminate spinel and silica nanoparticles [Volume 9, Issue 1, 2023, Pages 11-18]
Abdi, Hamid Effect of physical properties on the oscillation of an acoustically levitated droplet [Volume 10, Issue 1, 2024, Pages 33-40]
Abdullah, Amir Ultrasonic assisted cold compaction of CP titanium and Ti-6Al-4V alloy [Volume 10, Issue 2, 2024, Pages 87-96]
Abedini, Rezvan Ultrasonic assisted cold compaction of CP titanium and Ti-6Al-4V alloy [Volume 10, Issue 2, 2024, Pages 87-96]
Abegunde, Segun MichaelTalinum triangulare leaf and Musa sapientum peel extracts as corrosion inhibitors on ZA-27 Alloy [Volume 4, Issue 1, 2018, Pages 23-28]
Abolghandi, Ali Effects of local vibration on silo discharge and jamming: Employing an experimental approach [Volume 4, Issue 2, 2018, Pages 91-100]
Adebanjo, Sunday Assessment of an atmospheric heavy metal from a transport pool within the Ilorin Metropolis, Nigeria [Volume 7, Issue 1, 2021, Pages 11-21]
Adepoju, Muheez Assessment of an atmospheric heavy metal from a transport pool within the Ilorin Metropolis, Nigeria [Volume 7, Issue 1, 2021, Pages 11-21]
Adimi, Maryam Petrochemical wastewater treatment by modified electro-Fenton process with nano iron particles [Volume 1, Issue 4, 2015, Pages 215-223]
Afshar, Maryam On study of X-ray absorption and properties of dispersion of W, MoS2 and B4C particles in high density polyethylene [Volume 3, Issue 1, 2017, Pages 13-24]
Afshar Ebrahimi, Ali FCC catalyst attrition behavior at high temperatures [Volume 5, Issue 4, 2019, Pages 135-143]
Aghaei Hakkak, Rouzbeh Ultrasonic synthesis of Zn(II) methionine and ZnO nanostructures as a new precursor for ZnO nanoparticles and in-vitro study [Volume 5, Issue 2, 2019, Pages 109-116]
Aghajani, Hossein Electrophoretic deposition and corrosion behavior study of aluminum coating on AZ91D substrate [Volume 3, Issue 4, 2017, Pages 219-232]
Aghamiri, Seyedfoad Adsorption of CO2 and SO2 on multi-walled carbon nanotubes: experimental data and modeling using artificial neural network [Volume 5, Issue 1, 2019, Pages 33-45]
Aghamiri, Seyed Foad The effects of suspending medium on dielectrophoretic systems for separating and sorting carbon nanotubes [Volume 5, Issue 4, 2019, Pages 123-134]
Ahangarpour, Ameneh Fabrication of Zn1-XCuXO nanoparticles and investigation of their effect on the thermal conductivity of nanofluids [Volume 8, Issue 2, 2022, Pages 95-102]
Ahmadi, Jamal The effect of adding nano-silica on the ultrasonic pulse velocity of geopolymer concrete [Volume 7, Issue 2, 2021, Pages 99-105]
Ahmadi, Mojtaba Ash and sulphur removal from bitumen using column flotation technique: Experimental and response surface methodology modeling [Volume 2, Issue 1, 2016, Pages 1-13]
Ahmadi, Rahman The effect of microwave radiation on grinding kinetics by selection function and breakage function - A case study of low-grade siliceous manganese ores [Volume 4, Issue 1, 2018, Pages 39-47]
Ahmadi, Sayed Ali The computational study of the tautomerization of Dacarbazine in a biological system: The DFT approach [Volume 6, Issue 1, 2020, Pages 55-60]
Ahmadi, Sayed Ali Theoretical study of the tautomerization of Carmustine in a biological media as an anti-cancer drug [Volume 7, Issue 1, 2021, Pages 51-57]
Ahmadi, Seyyed Javad Xenon and krypton separation in a chromatographic column packed with granulated nano NaY zeolite [Volume 1, Issue 1, 2015, Pages 49-55]
Ahmadi, Shervin On study of X-ray absorption and properties of dispersion of W, MoS2 and B4C particles in high density polyethylene [Volume 3, Issue 1, 2017, Pages 13-24]
Ahmadi, Shervin The effect of nanoclay on the creation of clusters of polyamide 6 microfibrils [Volume 8, Issue 1, 2022, Pages 25-37]
Akbari Javar, Hamid Development and characterization of optimized sustained release voriconazole-loaded chitosan nanoparticles for ocular delivery [Volume 7, Issue 1, 2021, Pages 1-10]
Akhgar, Mohammad Reza The computational study of the tautomerization of Dacarbazine in a biological system: The DFT approach [Volume 6, Issue 1, 2020, Pages 55-60]
Akhgar, Mohammad Reza Theoretical study of the tautomerization of Carmustine in a biological media as an anti-cancer drug [Volume 7, Issue 1, 2021, Pages 51-57]
Akuma, Oji Investigating the effects of elutriation in upgrading middle-grade barite ore from Obubra, Cross River State, Nigeria for drilling mud applications [Volume 10, Issue 1, 2024, Pages 1-8]
Akuma, Oji Barite processing for industrial use – A bibliographic survey [Volume 10, Issue 1, 2024, Pages 19-32]
Akuma, Oji Technologies for processing of barite: A Conceptual review for use in Nigeria [Volume 10, Issue 2, 2024, Pages 59-72]
Alavi, Seyed Masoud Effect of graphene nanoplatelets on the microstructure and mechanical behavior of erbium-modified Al-7.5Si-0.5Mg alloy [Volume 6, Issue 1, 2020, Pages 37-45]
Alipour, Amin Optimization of an ecofriendly coating containing chitosan and gelatin as corrosion inhibitor of carbon steel grade E by Response Surface Method [Volume 5, Issue 1, 2019, Pages 23-31]
Aliu, Ebenezer TayoTalinum triangulare leaf and Musa sapientum peel extracts as corrosion inhibitors on ZA-27 Alloy [Volume 4, Issue 1, 2018, Pages 23-28]
Alizade Pudeh, Mohamad Analyzing the effect of gradation on specific gravity and viscosity of barite powder used in excavation mud [Volume 3, Issue 3, 2017, Pages 163-167]
Allen Gnana Raj, George Luminescence quenching studies of [Ru(dMeObpy)3]2+ complex using the quinone derivative-effect of micelles [Volume 9, Issue 1, 2023, Pages 35-42]
Altoé, Lorena Souza CastroBiosynthesis of nanoparticles by fungus Monacrosporium thaumasium and its action on egg masses of the snail Biomphalaria glabrata[Volume 10, Issue 1, 2024, Pages 9-17]
Amani, Arash The measurement of droplet size distribution of water-oil emulsion through NMR method [Volume 2, Issue 1, 2016, Pages 31-39]
Amani Ghadim, Alireza A green approach for the synthesis of silver nanoparticles using Lithospermum officinale root extract and evaluation of their antioxidant activity [Volume 3, Issue 4, 2017, Pages 187-195]
Amini, Mohsen Extending the Allowable Exposure Time of Rotating X-ray Anodes via an Embedded Lithium Pulsating Heat Pipe: A 3D Multiphase Analysis [(Articles in Press)]
Aminy, Mohammad Energy Modeling and Simulation including particle technologies within Single and Double Pass Solar Air Heaters [Volume 2, Issue 2, 2016, Pages 95-102]
Amiri Amraei, Iraj The effect of initiator and weight ratio on dynamic-mechanical properties of multilayer latex IPN with core/shell morphology [Volume 7, Issue 1, 2021, Pages 33-39]
Amiri Rigi, Zahra CFD simulation of pervaporation of organic aqueous mixture through silicalite nano-pore zeolite membrane [Volume 3, Issue 3, 2017, Pages 121-132]
Ammar, Ahmed Study of different methods to induce crosslinking of polyacrylamide for agriculture process [Volume 5, Issue 1, 2019, Pages 1-11]
Amoochi, Abbas Effect of physical properties on the oscillation of an acoustically levitated droplet [Volume 10, Issue 1, 2024, Pages 33-40]
Anbia, Mansoor Investigation of phosphate adsorption from aqueous media using synthetic mordenite and modified natural clinoptilolite zeolite adsorbents: characteristics, kinetics, and isotherms [Volume 7, Issue 2, 2021, Pages 119-130]
Aosati, Sirvan Evaluation of breakage and coalescence kernel constants for a mixer tank in the copper solvent extraction unit [Volume 6, Issue 1, 2020, Pages 13-23]
Arabpour, Maryam Removal of crystal violet from aquatic environment by surfactant-modified dolomite [Volume 2, Issue 3, 2016, Pages 173-182]
Araghchi, Masoud A spray pyrolysis method for fabrication of superhydrophobic copper substrate based on modified-alumina powder by fatty acid [Volume 6, Issue 1, 2020, Pages 25-36]
Ardestani, Fatemeh Inhibition of Staphylococcus aureus growth in fresh calf minced meat using low density Polyethylene films package promoted by titanium dioxide and zinc oxide nanoparticles [Volume 3, Issue 1, 2017, Pages 1-11]
Asadi, Saeid Modeling of splat particle splashing data during thermal spraying with the Burr distribution [Volume 3, Issue 1, 2017, Pages 41-50]
Asadi, Saeid Point and interval evaluation of nanoparticles censored sample in the spray process [Volume 5, Issue 2, 2019, Pages 91-99]
Asadi, Taleb A novel application of Co3O4@SiO2 nanocomposite as an efficient and robust catalyst for the preparation of some imidazolone derivatives [Volume 4, Issue 2, 2018, Pages 111-117]
Asgary, Masoud A spray pyrolysis method for fabrication of superhydrophobic copper substrate based on modified-alumina powder by fatty acid [Volume 6, Issue 1, 2020, Pages 25-36]
Askari-Paykani, Mohsen Optimization of SiC particle distribution during compocasting of A356-SiCp composites using D-optimal experiment design [Volume 3, Issue 3, 2017, Pages 145-154]
Asuquo, Bassy Dorcas Assessment of an atmospheric heavy metal from a transport pool within the Ilorin Metropolis, Nigeria [Volume 7, Issue 1, 2021, Pages 11-21]
Atashi, Hossein Feasibility study on the use of MIL-53(Al) as a support for iron catalysts in the CO hydrogenation reaction [Volume 9, Issue 1, 2023, Pages 43-49]
Attia, Lamis AbdelbasetModified bentonite as adsorbent material for the removal of the basic dye methylene blue from aqueous solutions [Volume 7, Issue 1, 2021, Pages 23-31]
Ayodele, Issac Assessment of an atmospheric heavy metal from a transport pool within the Ilorin Metropolis, Nigeria [Volume 7, Issue 1, 2021, Pages 11-21]
Azadeh Ghahfarokhi, Seyedeh Maedeh The effect of initiator and weight ratio on dynamic-mechanical properties of multilayer latex IPN with core/shell morphology [Volume 7, Issue 1, 2021, Pages 33-39]
Azarkish, Hassan Extending the Allowable Exposure Time of Rotating X-ray Anodes via an Embedded Lithium Pulsating Heat Pipe: A 3D Multiphase Analysis [(Articles in Press)]
Azimi, Gholamhassan The measurement of droplet size distribution of water-oil emulsion through NMR method [Volume 2, Issue 1, 2016, Pages 31-39]
Azizi Moghaddam, Atefeh Structural and magnetic properties of chemically synthesized yttrium-substituted nickel nanoferrite [Volume 8, Issue 2, 2022, Pages 87-94]
B
Babaei, Behnam Surface decorated magnetite nanoparticles with birhodanine and MoO2Cl2(dmf)2 as a new magnetic catalyst for epoxidation of olefins [Volume 5, Issue 1, 2019, Pages 47-60]
Bagheri, Azar Effect of the smallest microwave-synthesized Cu2S nanoparticles with surfactant templates on improving the properties of engine oil [(Articles in Press)]
Bagheri GH, Azar X-Shaped Thallium oxide nanostructures as a high performance photocatalyst for degradation of Cephalexin [Volume 5, Issue 2, 2019, Pages 117-122]
Bagheri Ghomi, Azar Application of CdO nanocatalyst in the acetylation of benzyl alcohols and degradation of sulfathiazole as a green approach [Volume 4, Issue 1, 2018, Pages 49-57]
Bahador, Sajad Optimization of induced gas flotation parameters for removal efficiency of near-water-density oils using response surface methodology [Volume 11, Issue 1, 2025, Pages 27-37]
Bahrami, Ali Optimization of an ecofriendly coating containing chitosan and gelatin as corrosion inhibitor of carbon steel grade E by Response Surface Method [Volume 5, Issue 1, 2019, Pages 23-31]
Balalizadeh, Hadiseh Preparation of pure cordierite through heat treatment of combustion synthesized magnesium aluminate spinel and silica nanoparticles [Volume 9, Issue 1, 2023, Pages 11-18]
Baniamerian, Hamed Improvement in photocatalysts and photocatalytic reactors for water and wastewater treatment: A review [Volume 2, Issue 3, 2016, Pages 119-140]
Bastan, Farzad Activated pharmaceutical ingredients produced by microreactors versus batch processes: A review [Volume 8, Issue 2, 2022, Pages 63-78]
Bayat, Marzieh Synthesizing Fe3O4, Mn3O4 and Mn3O4/Fe3O4 nanocatalysts using the sol-gel method as new precursors for the degradation of phenol by catalytic ozonation [Volume 8, Issue 1, 2022, Pages 39-51]
Bazzi, Mohadeseh Adsorption of methylene blue on lithium titanate and its composite with carbon dots: Optimization of parameters and adsorbent recovery [Volume 11, Issue 2, 2025, Pages 101-116]
Begheri Jamebozorgi, Ali Effects of local vibration on silo discharge and jamming: Employing an experimental approach [Volume 4, Issue 2, 2018, Pages 91-100]
Behnamfar, Mohammad Taghi Preparation of Gd2O3 nanoparticles from a new precursor and their catalytic activity for electrochemical reduction of CO2 to CO [Volume 1, Issue 1, 2015, Pages 21-30]
Behnamfar, Mohammad-Taghi A new precursor for preparation of magnetite (Fe3O4) nanoparticles [Volume 1, Issue 2, 2015, Pages 65-72]
Beigi, Sadegh An experimental investigation on drying kinetics of calcium carbonate [Volume 1, Issue 3, 2015, Pages 153-162]
Beigi, Sadegh Drying of calcium carbonate in a batch spouted bed dryer: optimization and kinetics modeling [Volume 3, Issue 2, 2017, Pages 89-99]
Beigmoradi, Razieh The effects of suspending medium on dielectrophoretic systems for separating and sorting carbon nanotubes [Volume 5, Issue 4, 2019, Pages 123-134]
Beigmoradi, Razieh Fabrication and optimization of superhydrophobic ZnO-SA/PVC/PVP nanocomposite membrane distillation for highly saline RO brine recovery [Volume 9, Issue 2, 2023, Pages 103-113]
Bezaatpour, Abolfazl Surface decorated magnetite nanoparticles with birhodanine and MoO2Cl2(dmf)2 as a new magnetic catalyst for epoxidation of olefins [Volume 5, Issue 1, 2019, Pages 47-60]
Bidabadi, Mehdi Effect of Radiation Heat Loss and Ventilation on Dust Explosions in Spherical Vessels [Volume 1, Issue 1, 2015, Pages 57-64]
Bidabadi, Mehdi Effect of the temperature difference between gas and organic dust on propagating spherical flames [Volume 2, Issue 3, 2016, Pages 151-161]
Bidarian, Vahid Dynamic modelling of hardness changes of aluminium nanostructure during mechanical ball milling process [Volume 3, Issue 1, 2017, Pages 25-32]
Bide, Yasamin Experimental evaluation of a dual-function solution for reducing flue gas pollutants using low-temperature counter-diffusive combustion of methane with Au0.06-Pd0.06/Al2O3 Catalyst [Volume 10, Issue 1, 2024, Pages 41-49]
Bogodage, Sakura G.Cyclone separator theories to predict performance and flow characteristics [Volume 7, Issue 2, 2021, Pages 83-98]
Charkhi, Amir Xenon and krypton separation in a chromatographic column packed with granulated nano NaY zeolite [Volume 1, Issue 1, 2015, Pages 49-55]
Charkhi, Amir An experimental investigation on drying kinetics of calcium carbonate [Volume 1, Issue 3, 2015, Pages 153-162]
Charkhi, Amir Drying of calcium carbonate in a batch spouted bed dryer: optimization and kinetics modeling [Volume 3, Issue 2, 2017, Pages 89-99]
Costa, Ethe de AraújoBiosynthesis of nanoparticles by fungus Monacrosporium thaumasium and its action on egg masses of the snail Biomphalaria glabrata[Volume 10, Issue 1, 2024, Pages 9-17]
D
Dadkhah, Danial A Review of Manufacturing Process of Polyethylene Pipe and Connectors for Applying in High-Pressure Natural Gas Pipelines [Volume 1, Issue 3, 2015, Pages 129-140]
Daneshmand, Hamid A spray pyrolysis method for fabrication of superhydrophobic copper substrate based on modified-alumina powder by fatty acid [Volume 6, Issue 1, 2020, Pages 25-36]
Davarpanah, Abdol Mahmood Structural and magnetic properties of chemically synthesized yttrium-substituted nickel nanoferrite [Volume 8, Issue 2, 2022, Pages 87-94]
Dehghan-Rahimi, Azadeh Enhanced photocatalytic degradation of 2,4-dichlorophenol in water solution using Sr-doped ZnAl2O4 nanoparticles [Volume 4, Issue 2, 2018, Pages 101-109]
Dinarvand, Saeed CFD simulations on natural convection heat transfer of alumina-water nanofluid with Brownian motion effect in a 3-D enclosure [Volume 2, Issue 3, 2016, Pages 163-171]
E
Ebrahim Asghari, Fahimeh Energy Modeling and Simulation including particle technologies within Single and Double Pass Solar Air Heaters [Volume 2, Issue 2, 2016, Pages 95-102]
Ebube, Okoroji Victor Assessment of an atmospheric heavy metal from a transport pool within the Ilorin Metropolis, Nigeria [Volume 7, Issue 1, 2021, Pages 11-21]
Edem, Utibe BenedictInvestigating the effects of elutriation in upgrading middle-grade barite ore from Obubra, Cross River State, Nigeria for drilling mud applications [Volume 10, Issue 1, 2024, Pages 1-8]
Edem, Utibe BenedictBarite processing for industrial use – A bibliographic survey [Volume 10, Issue 1, 2024, Pages 19-32]
Edem, Utibe BenedictTechnologies for processing of barite: A Conceptual review for use in Nigeria [Volume 10, Issue 2, 2024, Pages 59-72]
Eftekhari, Amin Effect of Sn Doping on Structural and Optical Properties of 2D α-MoO3 Nanostructures [Volume 2, Issue 2, 2016, Pages 87-93]
Eftekhari Yazdi, Mohammad CFD simulations on natural convection heat transfer of alumina-water nanofluid with Brownian motion effect in a 3-D enclosure [Volume 2, Issue 3, 2016, Pages 163-171]
Ehsani, Morteza The effect of nanoclay on the creation of clusters of polyamide 6 microfibrils [Volume 8, Issue 1, 2022, Pages 25-37]
Elhady, Mohamed AhmedStudy of different methods to induce crosslinking of polyacrylamide for agriculture process [Volume 5, Issue 1, 2019, Pages 1-11]
Eliassi, Ali Effects of catalyst particle size on methanol dehydration at different temperatures and weight hourly space velocities [Volume 2, Issue 1, 2016, Pages 41-47]
El-Naggar, Amal A.Gamma irradiation induced surface modification of silk fabrics for antibacterial application [Volume 3, Issue 2, 2017, Pages 71-77]
Elnahas, Hussien Study of different methods to induce crosslinking of polyacrylamide for agriculture process [Volume 5, Issue 1, 2019, Pages 1-11]
El Sayed, Sahar S.Gamma irradiation induced surface modification of silk fabrics for antibacterial application [Volume 3, Issue 2, 2017, Pages 71-77]
Entezami, Aliakbar Investigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite [Volume 1, Issue 2, 2015, Pages 85-90]
Eslami, Shahab Pool boiling heat transfer coefficient of pure liquids using dimensional analysis [Volume 3, Issue 2, 2017, Pages 63-69]
Eslami-Farsani, Reza Optimization of SiC particle distribution during compocasting of A356-SiCp composites using D-optimal experiment design [Volume 3, Issue 3, 2017, Pages 145-154]
Esmailian, Mohammad Effect of Zr particles and RRA heat treatment on properties and grain boundary precipitation of 7055 Aluminum alloys [Volume 11, Issue 2, 2025, Pages 93-100]
Esmeli, Kiraz Effect of ultrasound on the dispersion of kaolinite and sepiolite suspensions with and without sodium silicate [Volume 6, Issue 1, 2020, Pages 47-54]
Etemad, Seyed Gholamreza Numerical simulation of nanofluids flow and heat transfer through isosceles triangular channels [Volume 4, Issue 1, 2018, Pages 29-38]
Etminani, Mahsa Effect of ZrSiO4 particles on the wear properties of as-cast Al matrix particulate composites fabricated via various casting routes [Volume 5, Issue 4, 2019, Pages 171-177]
F
Fadaeian, Manoochehr A novel application of Co3O4@SiO2 nanocomposite as an efficient and robust catalyst for the preparation of some imidazolone derivatives [Volume 4, Issue 2, 2018, Pages 111-117]
Farahani, Ali Composite processing and study of properties for polypropylene EPD60R/modified nanoclay Cloisite® 15A [Volume 5, Issue 2, 2019, Pages 101-108]
Faramarzi, Mehdi Pool boiling heat transfer coefficient of pure liquids using dimensional analysis [Volume 3, Issue 2, 2017, Pages 63-69]
Farbod, Mansoor Fabrication of Zn1-XCuXO nanoparticles and investigation of their effect on the thermal conductivity of nanofluids [Volume 8, Issue 2, 2022, Pages 95-102]
Farrokh, Atie Numerical investigation of the effect of nanoparticle sedimentation on the thermal behavior of cavities with different cross-sectional shapes [Volume 9, Issue 2, 2023, Pages 73-84]
Fartashvand, Vahid Ultrasonic assisted cold compaction of CP titanium and Ti-6Al-4V alloy [Volume 10, Issue 2, 2024, Pages 87-96]
Farzan, Elham Effect of process parameters on quality properties and drying time of hawthorn in a vibro-fluidized bed dryer [Volume 3, Issue 1, 2017, Pages 51-62]
Farzaneh, Mahtab Sonochemical synthesis of γ-Fe2O3 nanoparticles for cancer hyperthermia [Volume 10, Issue 2, 2024, Pages 97-107]
Fasihi, Mohammad The influence of cellulose pulp and cellulose microfibers on the flexural performance of green-engineered cementitious composites [Volume 3, Issue 1, 2017, Pages 33-40]
Fassih, Amir Geometric parameters effect on the reaction zone of premixed CH4 catalytic combustion in a fibrous porous medium [Volume 8, Issue 1, 2022, Pages 1-7]
FathinejadJirandehi, Hassan Petrochemical wastewater treatment by modified electro-Fenton process with nano iron particles [Volume 1, Issue 4, 2015, Pages 215-223]
FathinrjadJirandehi, Hassan Synthesis and structural properties of Polyvinylpyrrolidone based nanocomposite hydrogels for isoniazid drug delivery [Volume 1, Issue 3, 2015, Pages 183-193]
Fatile, Babajide OluwagbengaTalinum triangulare leaf and Musa sapientum peel extracts as corrosion inhibitors on ZA-27 Alloy [Volume 4, Issue 1, 2018, Pages 23-28]
Feiz, Ali Effect of surface-functionalization of Na+-montmorillonite nanoclay using 3-aminopropyltrimethoxy silane on the mechanical properties of E-glass chopped strand mat/epoxy composites [Volume 4, Issue 2, 2018, Pages 59-65]
Foroutan Ghazvini, Saba FCC catalyst attrition behavior at high temperatures [Volume 5, Issue 4, 2019, Pages 135-143]
Friday, Joel OgbonnaInvestigating the effects of elutriation in upgrading middle-grade barite ore from Obubra, Cross River State, Nigeria for drilling mud applications [Volume 10, Issue 1, 2024, Pages 1-8]
Friday, Joel OgbonnaBarite processing for industrial use – A bibliographic survey [Volume 10, Issue 1, 2024, Pages 19-32]
Friday, Joel OgbonnaTechnologies for processing of barite: A Conceptual review for use in Nigeria [Volume 10, Issue 2, 2024, Pages 59-72]
G
Ghadamian, Hossein Energy Modeling and Simulation including particle technologies within Single and Double Pass Solar Air Heaters [Volume 2, Issue 2, 2016, Pages 95-102]
Ghadami Jadval Ghadam, Aboutaleb MHD Three-Dimensional Stagnation-Point Flow and Heat Transfer of a Nanofluid over a Stretching Sheet [Volume 1, Issue 3, 2015, Pages 141-151]
Ghadami Jadval Ghadam, Aboutaleb Effects of Brownian motion and Thermophoresis on MHD Mixed Convection Stagnation-point Flow of a Nanofluid Toward a Stretching Vertical Sheet in Porous Medium [Volume 1, Issue 4, 2015, Pages 225-240]
Ghadami Jadval Ghadam, Aboutaleb Investigation of Mechanical Properties Prediction of Synthesized Nylon-66/Nano-Calcium Carbonate Composites [Volume 1, Issue 4, 2015, Pages 241-251]
Ghader, Sattar Interpreting the effect of operating variable, seed, and impurity on the induction time of silver nanoparticles precipitation by cluster coagulation models [Volume 4, Issue 2, 2018, Pages 81-90]
Ghaderi Hamidi, Ahmad Effects of Temperature and Particle Size Distribution on Barite Reduction by Carbon monoxide Gas [Volume 2, Issue 2, 2016, Pages 79-85]
Ghaderi Hamidi, Ahmad Effects of Fe2O3 addition and mechanical activation on thermochemical heat storage properties of the Co3O4/CoO system [Volume 4, Issue 1, 2018, Pages 13-22]
Gharibi, Arash Effects of local vibration on silo discharge and jamming: Employing an experimental approach [Volume 4, Issue 2, 2018, Pages 91-100]
Ghasemzadeh, Mohammad Ali A novel application of Co3O4@SiO2 nanocomposite as an efficient and robust catalyst for the preparation of some imidazolone derivatives [Volume 4, Issue 2, 2018, Pages 111-117]
Ghashang, Majid Synthesis, structural characterization and catalytic activity of TiO2/Al2O3 photo-composite [Volume 1, Issue 1, 2015, Pages 31-38]
Ghashang, Majid Zn2SnO4 nanostructure as an efficient catalyst for the preparation of pyrano[3,2-c]chromene and pyrano[4,3-b]pyran derivatives under ultrasonic irradiation conditions [Volume 5, Issue 1, 2019, Pages 61-69]
Ghazanfari, Dadkhoda Theoretical study of the tautomerization of Carmustine in a biological media as an anti-cancer drug [Volume 7, Issue 1, 2021, Pages 51-57]
Gholami, Mostafa Investigating the effects of chemical modification of clay nanoparticles on thermal degradation and mechanical properties of TPU/nanoclay composites [Volume 1, Issue 1, 2015, Pages 1-11]
Gholampour, Mahdi Review of advanced materials technology for targeted and sustained drug delivery with the aim of developing a roadmap [Volume 11, Issue 1, 2025, Pages 11-25]
Gholinejad, Mehran Analyzing the effect of gradation on specific gravity and viscosity of barite powder used in excavation mud [Volume 3, Issue 3, 2017, Pages 163-167]
Ghotbi Ravandi, Mohamad Amin Kinetic Modeling of the High Temperature Water Gas Shift Reaction on a Novel Fe-Cr Nanocatalyst by Using Various Kinetic Mechanisms [Volume 1, Issue 1, 2015, Pages 13-19]
Goharrokhi, Ali The effect of adding nano-silica on the ultrasonic pulse velocity of geopolymer concrete [Volume 7, Issue 2, 2021, Pages 99-105]
Goli Khorasgani, Ahmad Rheological properties of modified Bitumen: Comparison of waste polymers’ performance [Volume 1, Issue 4, 2015, Pages 205-213]
Gordi, Zinat One-Pot solvent-free synthesis of Highly Substituted Imidazoles catalyzed by zeolite [Volume 1, Issue 4, 2015, Pages 253-263]
Gudin, Geovane SouzaBiosynthesis of nanoparticles by fungus Monacrosporium thaumasium and its action on egg masses of the snail Biomphalaria glabrata[Volume 10, Issue 1, 2024, Pages 9-17]
H
Habibi, Biuck A green approach for the synthesis of silver nanoparticles using Lithospermum officinale root extract and evaluation of their antioxidant activity [Volume 3, Issue 4, 2017, Pages 187-195]
Habibi Karahrodi, Marzieh Rheological properties of modified Bitumen: Comparison of waste polymers’ performance [Volume 1, Issue 4, 2015, Pages 205-213]
Habibpour, Razieh Computational study of electronic, spectroscopic, and chemical properties of (CdO)n (n=1-7) nanoclusters as a transparent conducting oxide [Volume 1, Issue 4, 2015, Pages 195-204]
Hadadzadeh, Hassan A new precursor for preparation of magnetite (Fe3O4) nanoparticles [Volume 1, Issue 2, 2015, Pages 65-72]
Hajiaghababaei, Leila ZnS/ZnO heterostructure semiconductor: A promising ionic liquid media approach without calcination [Volume 8, Issue 2, 2022, Pages 115-119]
Hallajighomi, Millad Synthesis and characterization of Polyaniline Nanocomposite by Using Several Types of Surfactants in Aqueous Media [Volume 1, Issue 3, 2015, Pages 163-170]
Hasanvand, Azin Theoretical thermodynamics and practical kinetics studies of oxygen desorption from Co3O4-5 wt% Al2O3 and Co3O4-5 wt% Y2O3 composites [Volume 5, Issue 1, 2019, Pages 13-21]
Hashemabadi, Seyed Hassan Evaluation of breakage and coalescence kernel constants for a mixer tank in the copper solvent extraction unit [Volume 6, Issue 1, 2020, Pages 13-23]
Hashemi, Seyed Jamal Development and characterization of optimized sustained release voriconazole-loaded chitosan nanoparticles for ocular delivery [Volume 7, Issue 1, 2021, Pages 1-10]
Hashemi Shahri, Seyed Shahab-alddin Mechanical behavior of magnesium-steel particles composites with interpenetrating phases [Volume 9, Issue 1, 2023, Pages 29-34]
Hashemzaei, Zahra Combustion synthesis of sponge-like CeO2 powder for selective determination of uric acid in biological fluids [Volume 7, Issue 2, 2021, Pages 73-82]
Hassanpour, Mohammad Reza A Review of Manufacturing Process of Polyethylene Pipe and Connectors for Applying in High-Pressure Natural Gas Pipelines [Volume 1, Issue 3, 2015, Pages 129-140]
Hassanzadeh, Bahman A new method for the preparation of pure topiramate with a micron particle size [Volume 3, Issue 3, 2017, Pages 169-174]
Hassanzadeh Tabrizi, S.A. Sonochemical synthesis of γ-Fe2O3 nanoparticles for cancer hyperthermia [Volume 10, Issue 2, 2024, Pages 97-107]
Hassanzadeh Tabrizi, Sayed Ali Synthesis, characterization, and magnetic properties of NiFe2O4 nanoparticles [Volume 8, Issue 2, 2022, Pages 79-85]
Hassanzadeh-Tabrizi, Sayed Ali Synthesis and investigation of photocatalytic properties of CaSnO3/Ag composite [Volume 10, Issue 2, 2024, Pages 109-115]
Hatami, Negin Interpreting the effect of operating variable, seed, and impurity on the induction time of silver nanoparticles precipitation by cluster coagulation models [Volume 4, Issue 2, 2018, Pages 81-90]
Hejri, Mehri Numerical simulation of nanofluids flow and heat transfer through isosceles triangular channels [Volume 4, Issue 1, 2018, Pages 29-38]
Hematian, Saeideh Enhanced sulfate removal from aqueous solution using ion-exchanged clinoptilolite: A study on adsorption efficiency and process optimization [Volume 10, Issue 2, 2024, Pages 73-86]
Heshami, Monireh The effect of microwave radiation on grinding kinetics by selection function and breakage function - A case study of low-grade siliceous manganese ores [Volume 4, Issue 1, 2018, Pages 39-47]
Heshmatian, Sara Approximation and analytical study of the relativistic confined two particles state within the complex potential in the isotropic medium [Volume 9, Issue 2, 2023, Pages 85-101]
Heydari, Elham Evaluation of the effect of granulation processing parameters on the granule properties: Lactose- Cornstarch case study [Volume 1, Issue 3, 2015, Pages 171-182]
Heydari Naqdali, Mokhtar Synthesis and structural properties of Polyvinylpyrrolidone based nanocomposite hydrogels for isoniazid drug delivery [Volume 1, Issue 3, 2015, Pages 183-193]
Hojjat, Mohammad Modeling heat transfer of non-Newtonian nanofluids using hybrid ANN-Metaheuristic optimization algorithm [Volume 3, Issue 4, 2017, Pages 233-241]
Hojjat, Mohammad Numerical simulation of nanofluids flow and heat transfer through isosceles triangular channels [Volume 4, Issue 1, 2018, Pages 29-38]
Hojjat, Mohammad Adsorption of CO2 and SO2 on multi-walled carbon nanotubes: experimental data and modeling using artificial neural network [Volume 5, Issue 1, 2019, Pages 33-45]
Hosseini, Mehdi Analysis of effective parameters on cadmium cementation reaction from the perspective of diffusion [Volume 6, Issue 2, 2020, Pages 81-93]
I
Ibrahim, Sayeda M.Gamma irradiation induced surface modification of silk fabrics for antibacterial application [Volume 3, Issue 2, 2017, Pages 71-77]
Ifeoluwa, Tinuoye AgnesToxicity and carcinogenic potentials of particulate-bound polycyclic aromatic hydrocarbons emitted at the epicenter of major abattoirs in Ilorin Metropolis, Kwara State, Nigeria [Volume 11, Issue 1, 2025, Pages 39-51]
Imanparast, Mohammad Enhancement of E-glass fiber/epoxy composite bending performance via graphene addition [Volume 6, Issue 2, 2020, Pages 61-65]
Iraji, Naghmeh Adsorption of CO2 and SO2 on multi-walled carbon nanotubes: experimental data and modeling using artificial neural network [Volume 5, Issue 1, 2019, Pages 33-45]
Izadi Vasafi, Hossein Morphology and Mechanical Properties Investigation of Binary Polymer Blends Based on PP/SEBS and PP/PC [Volume 2, Issue 3, 2016, Pages 183-191]
J
Jabbarzare, Saeid Synthesis and characterization of Ni-doped CaTiO3 nano-powders and their potential for the removal of Cd from wastewaters [Volume 8, Issue 1, 2022, Pages 9-16]
Jabbarzare, Saeid Heavy metal removal using SnO2 nanoparticles prepared in a grape extract media [Volume 9, Issue 2, 2023, Pages 51-61]
Jabiri, Reza Microstructure and optical properties of lustre glazes produced on a copper body [Volume 9, Issue 2, 2023, Pages 115-123]
Jafari, Akbar Effects of local vibration on silo discharge and jamming: Employing an experimental approach [Volume 4, Issue 2, 2018, Pages 91-100]
Jafarnia, Seyed Hadi FCC catalyst attrition behavior at high temperatures [Volume 5, Issue 4, 2019, Pages 135-143]
Jahanshir, Arezu Exciton properties in 2D-Xenes nanomaterials within quantum field approaches [Volume 7, Issue 2, 2021, Pages 59-71]
Jahanshir, Arezu Theoretical study of quantum and thermal properties of particles’ bound state in quantum disks [Volume 9, Issue 1, 2023, Pages 19-27]
Jahanshir, Arezu Approximation and analytical study of the relativistic confined two particles state within the complex potential in the isotropic medium [Volume 9, Issue 2, 2023, Pages 85-101]
Jahanshir, Arezu Effects of hybrid confinement potential on predictable hadronic highly resonance states [Volume 11, Issue 1, 2025, Pages 1-10]
Jamshidi, Masoud The influence of cellulose pulp and cellulose microfibers on the flexural performance of green-engineered cementitious composites [Volume 3, Issue 1, 2017, Pages 33-40]
Janghorban, Kamran Modified CNTs/Nafion composite: The role of sulfonate groups on the performance of prepared proton exchange methanol fuel cell’s membrane [Volume 3, Issue 4, 2017, Pages 211-218]
Javidi, Mohammad Masoud Diagnosis of the disease using an ant colony gene selection method based on information gain ratio using fuzzy rough sets [Volume 3, Issue 4, 2017, Pages 175-186]
Jelodari, Zahra Application of modified bentonite for efficient water purification: A case of Cr(VI) adsorption [Volume 10, Issue 2, 2024, Pages 117-128]
Joshaghani, Mohammad Ash and sulphur removal from bitumen using column flotation technique: Experimental and response surface methodology modeling [Volume 2, Issue 1, 2016, Pages 1-13]
K
Kaikhosravi, Mohammad A new precursor for preparation of magnetite (Fe3O4) nanoparticles [Volume 1, Issue 2, 2015, Pages 65-72]
Kalani Nejad, Alireza CFD simulations on natural convection heat transfer of alumina-water nanofluid with Brownian motion effect in a 3-D enclosure [Volume 2, Issue 3, 2016, Pages 163-171]
Karamoozian, Mohammad Crushing analysis of the industrial cage mill and the laboratory jaw crusher [Volume 3, Issue 3, 2017, Pages 155-161]
Karimian, Farid Development and characterization of optimized sustained release voriconazole-loaded chitosan nanoparticles for ocular delivery [Volume 7, Issue 1, 2021, Pages 1-10]
Kazemeini, Mohammad Xenon and krypton separation in a chromatographic column packed with granulated nano NaY zeolite [Volume 1, Issue 1, 2015, Pages 49-55]
Kazemeini, Mohammad Activated pharmaceutical ingredients produced by microreactors versus batch processes: A review [Volume 8, Issue 2, 2022, Pages 63-78]
Kazemimoghadam, Mansoor CFD simulation of pervaporation of organic aqueous mixture through silicalite nano-pore zeolite membrane [Volume 3, Issue 3, 2017, Pages 121-132]
Kehinde, Pelumi DavidToxicity and carcinogenic potentials of particulate-bound polycyclic aromatic hydrocarbons emitted at the epicenter of major abattoirs in Ilorin Metropolis, Kwara State, Nigeria [Volume 11, Issue 1, 2025, Pages 39-51]
Keshavarz Alamdari, Eskandar Evaluation of breakage and coalescence kernel constants for a mixer tank in the copper solvent extraction unit [Volume 6, Issue 1, 2020, Pages 13-23]
Keshavarzi, Reza Experimental evaluation of a dual-function solution for reducing flue gas pollutants using low-temperature counter-diffusive combustion of methane with Au0.06-Pd0.06/Al2O3 Catalyst [Volume 10, Issue 1, 2024, Pages 41-49]
Keshavarz Moraveji, Mostafa Composite processing and study of properties for polypropylene EPD60R/modified nanoclay Cloisite® 15A [Volume 5, Issue 2, 2019, Pages 101-108]
Keshtkar, Ali Reza Application of response surface methodology for thorium(IV) removal using Amberlite IR-120 and IRA-400: Ion exchange equilibrium and kinetics [Volume 3, Issue 2, 2017, Pages 101-112]
Khajavi, Ramin The effect of nanoclay on the creation of clusters of polyamide 6 microfibrils [Volume 8, Issue 1, 2022, Pages 25-37]
Khajenoori, Maryam Application of modified bentonite for efficient water purification: A case of Cr(VI) adsorption [Volume 10, Issue 2, 2024, Pages 117-128]
Khalafi, Reyhaneh A Review of Manufacturing Process of Polyethylene Pipe and Connectors for Applying in High-Pressure Natural Gas Pipelines [Volume 1, Issue 3, 2015, Pages 129-140]
Khalili, Saber A modified Marmottant model to study the effects of a shell rupture on the subharmonic threshold of encapsulated microbubbles [Volume 7, Issue 1, 2021, Pages 41-50]
Khalili Parizi, Mohammad Vahid Effects of local vibration on silo discharge and jamming: Employing an experimental approach [Volume 4, Issue 2, 2018, Pages 91-100]
Khanmohammadi, Raheleh Ultrasonic assisted cold compaction of CP titanium and Ti-6Al-4V alloy [Volume 10, Issue 2, 2024, Pages 87-96]
Khonakdar, Hossein Ali The effect of nanoclay on the creation of clusters of polyamide 6 microfibrils [Volume 8, Issue 1, 2022, Pages 25-37]
Khoramabadi, Mohammad Ali Effective Parameters on the Phase Morphology and Mechanical Properties of PP/PET/SEBS Ternary Polymer Blends [Volume 1, Issue 1, 2015, Pages 39-48]
Khoshrooyan, Leila Effects of catalyst particle size on methanol dehydration at different temperatures and weight hourly space velocities [Volume 2, Issue 1, 2016, Pages 41-47]
Khosravi, Hamed Optimization of SiC particle distribution during compocasting of A356-SiCp composites using D-optimal experiment design [Volume 3, Issue 3, 2017, Pages 145-154]
Khosravi, Hamed Effect of surface-functionalization of Na+-montmorillonite nanoclay using 3-aminopropyltrimethoxy silane on the mechanical properties of E-glass chopped strand mat/epoxy composites [Volume 4, Issue 2, 2018, Pages 59-65]
Khosravi, Hamed Effect of graphene nanoplatelets on the microstructure and mechanical behavior of erbium-modified Al-7.5Si-0.5Mg alloy [Volume 6, Issue 1, 2020, Pages 37-45]
Khosravi, Hamed Enhancement of E-glass fiber/epoxy composite bending performance via graphene addition [Volume 6, Issue 2, 2020, Pages 61-65]
Khosravi, Hamed Fabrication method, microstructural characteristics, and hardness behavior of an interpenetrating phases hybrid aluminum/alumina-nanodiamond composite [Volume 9, Issue 2, 2023, Pages 63-71]
Khosravi, Hamed On the positron annihilation spectroscopy and tensile behavior of COOH-MWCNT/epoxy nanocomposites [Volume 10, Issue 1, 2024, Pages 51-57]
Khosravi, Mohammad A Review of Manufacturing Process of Polyethylene Pipe and Connectors for Applying in High-Pressure Natural Gas Pipelines [Volume 1, Issue 3, 2015, Pages 129-140]
Khosravi, Morteza Predictive modeling of the length of prepared CNT by CVD through ANN-MPSO and GEP [Volume 5, Issue 4, 2019, Pages 145-159]
Kiani Aliabadi, Ehsan Fabrication and optimization of superhydrophobic ZnO-SA/PVC/PVP nanocomposite membrane distillation for highly saline RO brine recovery [Volume 9, Issue 2, 2023, Pages 103-113]
Kianvash, Abbas Investigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite [Volume 1, Issue 2, 2015, Pages 85-90]
Koohestanian, Esmaeil Synthesis and Statistical Analysis of Changing Size of Nano-structured PbO2 during Mechanical Milling Using Taguchi Methodology [Volume 2, Issue 1, 2016, Pages 49-54]
Koohestanian, Esmaeil Dynamic modelling of hardness changes of aluminium nanostructure during mechanical ball milling process [Volume 3, Issue 1, 2017, Pages 25-32]
Koohestanian, Esmaeil Fe3O4@SiO2/AEPTMS/Fe(OTf)3: An efficient superparamagnetic nanocatalyst for the protecting of alcohols [Volume 9, Issue 1, 2023, Pages 1-9]
Koohkan, Mohammad On the positron annihilation spectroscopy and tensile behavior of COOH-MWCNT/epoxy nanocomposites [Volume 10, Issue 1, 2024, Pages 51-57]
Kuye, Ayoade Investigating the effects of elutriation in upgrading middle-grade barite ore from Obubra, Cross River State, Nigeria for drilling mud applications [Volume 10, Issue 1, 2024, Pages 1-8]
Kuye, Ayoade Barite processing for industrial use – A bibliographic survey [Volume 10, Issue 1, 2024, Pages 19-32]
Kuye, Ayoade Technologies for processing of barite: A Conceptual review for use in Nigeria [Volume 10, Issue 2, 2024, Pages 59-72]
L
Lahooti, Mahboobeh Synthesis of pure monoclinic zirconia nanoparticles using ultrasound cavitation technique [Volume 2, Issue 2, 2016, Pages 69-77]
Latifi, Seyed Mahdi Kinetic Modeling of the High Temperature Water Gas Shift Reaction on a Novel Fe-Cr Nanocatalyst by Using Various Kinetic Mechanisms [Volume 1, Issue 1, 2015, Pages 13-19]
Leung, Andrew Y. T.Cyclone separator theories to predict performance and flow characteristics [Volume 7, Issue 2, 2021, Pages 83-98]
M
Madadi, Vahid Effect of process parameters on quality properties and drying time of hawthorn in a vibro-fluidized bed dryer [Volume 3, Issue 1, 2017, Pages 51-62]
Madadi Avargani, Vahid Enhancement in energy and exergy efficiency of a solar receiver using suspended alumina nanparticles (nanofluid) as heat transfer fluid [Volume 1, Issue 2, 2015, Pages 73-83]
Mahdi, Miralam Numerical investigation of the effect of different parameters on emitted shockwave from bubble collapse in a nozzle [Volume 6, Issue 2, 2020, Pages 67-80]
Mahdi, Miralam A modified Marmottant model to study the effects of a shell rupture on the subharmonic threshold of encapsulated microbubbles [Volume 7, Issue 1, 2021, Pages 41-50]
Mahdi, Miralam Numerical investigation of the effect of nanoparticle sedimentation on the thermal behavior of cavities with different cross-sectional shapes [Volume 9, Issue 2, 2023, Pages 73-84]
Mahmoudi, Jafar Photocatalytic degradation of methyl orange using TiO2:Mg2+/zeolite composite under visible light irradiation [Volume 6, Issue 1, 2020, Pages 1-12]
Mahmoudi Najafi, Seyed Heydar Synthesis of pure monoclinic zirconia nanoparticles using ultrasound cavitation technique [Volume 2, Issue 2, 2016, Pages 69-77]
Malekzadeh, Asadollah Pool boiling heat transfer coefficient of pure liquids using dimensional analysis [Volume 3, Issue 2, 2017, Pages 63-69]
Malekzadeh, Azizm Synthesis of pure monoclinic zirconia nanoparticles using ultrasound cavitation technique [Volume 2, Issue 2, 2016, Pages 69-77]
Mansoori, Yagoub Fe3O4@ZrO2-SO3H Nanoparticles: A new magnetically retrievable catalyst for esterification of mono- and dicarboxylic acids [Volume 4, Issue 1, 2018, Pages 1-12]
Mansoori, Yagoub Fe3O4@SiO2–SO3H Nanoparticles: An efficient magnetically retrievable catalyst for esterification reactions [Volume 4, Issue 2, 2018, Pages 67-79]
Mansoori, Yagoub Surface decorated magnetite nanoparticles with birhodanine and MoO2Cl2(dmf)2 as a new magnetic catalyst for epoxidation of olefins [Volume 5, Issue 1, 2019, Pages 47-60]
Mansouri, Fariborz Engineered magnetic nanoparticles as recyclable Brønsted acid catalysts: Advances in particle design and applications in organic transformations [Volume 11, Issue 1, 2025, Pages 63-92]
Mansoury, Sedighe Diagnosis of the disease using an ant colony gene selection method based on information gain ratio using fuzzy rough sets [Volume 3, Issue 4, 2017, Pages 175-186]
Marcous, Arin Inhibition of Staphylococcus aureus growth in fresh calf minced meat using low density Polyethylene films package promoted by titanium dioxide and zinc oxide nanoparticles [Volume 3, Issue 1, 2017, Pages 1-11]
Mardali, Mahan ZnS/ZnO heterostructure semiconductor: A promising ionic liquid media approach without calcination [Volume 8, Issue 2, 2022, Pages 115-119]
Masdarolomoor, Fatemeh Effect of Sn Doping on Structural and Optical Properties of 2D α-MoO3 Nanostructures [Volume 2, Issue 2, 2016, Pages 87-93]
Mashayekhi, Roya The effect of nanoclay on the creation of clusters of polyamide 6 microfibrils [Volume 8, Issue 1, 2022, Pages 25-37]
Masoudinia, Mona Application of CdO nanocatalyst in the acetylation of benzyl alcohols and degradation of sulfathiazole as a green approach [Volume 4, Issue 1, 2018, Pages 49-57]
Masoudzadeh, Fatemeh The influence of cellulose pulp and cellulose microfibers on the flexural performance of green-engineered cementitious composites [Volume 3, Issue 1, 2017, Pages 33-40]
Mazdak, Siamak Effect of physical properties on the oscillation of an acoustically levitated droplet [Volume 10, Issue 1, 2024, Pages 33-40]
Mehdigholami, Somayeh Fe3O4@SiO2/AEPTMS/Fe(OTf)3: An efficient superparamagnetic nanocatalyst for the protecting of alcohols [Volume 9, Issue 1, 2023, Pages 1-9]
Mehdikhani, Behzad The effect of adding nano-silica on the ultrasonic pulse velocity of geopolymer concrete [Volume 7, Issue 2, 2021, Pages 99-105]
Mehdipourghazi, Mohsen Synthesis and characterization of Polyaniline Nanocomposite by Using Several Types of Surfactants in Aqueous Media [Volume 1, Issue 3, 2015, Pages 163-170]
Mehdipour Ghazi, Mohsen Removal of Heavy Metal Particles by LTJ, ANA, SVR, BEC and MER zeolites particles: A Molecular Dynamics Simulation Study [Volume 1, Issue 2, 2015, Pages 99-111]
Mehmandoost Khajeh-Dad, Ali Akbar On the positron annihilation spectroscopy and tensile behavior of COOH-MWCNT/epoxy nanocomposites [Volume 10, Issue 1, 2024, Pages 51-57]
Meligi, Gamal Study of different methods to induce crosslinking of polyacrylamide for agriculture process [Volume 5, Issue 1, 2019, Pages 1-11]
Milani, Mostafa Effect of ion concentration on viscosity, electrical conductivity and deposit weight of doped nano alumina prepared by electrophoretic deposition [Volume 2, Issue 2, 2016, Pages 55-68]
Mirkazemi, Seyed Mohammad Effect of ion concentration on viscosity, electrical conductivity and deposit weight of doped nano alumina prepared by electrophoretic deposition [Volume 2, Issue 2, 2016, Pages 55-68]
Mir Mohamad Sadeghi, Gity Investigating the effects of chemical modification of clay nanoparticles on thermal degradation and mechanical properties of TPU/nanoclay composites [Volume 1, Issue 1, 2015, Pages 1-11]
Miroliaei, Ali Reza Numerical simulation of effect of non-spherical particle shape and bed size on hydrodynamics of packed beds [Volume 3, Issue 3, 2017, Pages 133-143]
Mirzaei, Ali Akbar Feasibility study on the use of MIL-53(Al) as a support for iron catalysts in the CO hydrogenation reaction [Volume 9, Issue 1, 2023, Pages 43-49]
Mirzaie, Sara Ultrasonic synthesis of Zn(II) methionine and ZnO nanostructures as a new precursor for ZnO nanoparticles and in-vitro study [Volume 5, Issue 2, 2019, Pages 109-116]
Mobayyen Jarihani, Fatemeh A new method for the preparation of pure acamprosate calcium with a micron particle size [Volume 8, Issue 1, 2022, Pages 17-23]
Mobini, Amir Geometric parameters effect on the reaction zone of premixed CH4 catalytic combustion in a fibrous porous medium [Volume 8, Issue 1, 2022, Pages 1-7]
Modarres, Hamid Removal of Heavy Metal Particles by LTJ, ANA, SVR, BEC and MER zeolites particles: A Molecular Dynamics Simulation Study [Volume 1, Issue 2, 2015, Pages 99-111]
Moeini, Sepideh Optimization of the Ba+2 uptake in the formation process of hydrogels using central composite design: Kinetics and thermodynamic studies of malachite green removal by Ba-alginate particles [Volume 6, Issue 2, 2020, Pages 95-102]
Moghadam, Hamid Mono-Size Distribution Index (MSDI): A new criterion for the quantitative description of size distribution [Volume 5, Issue 2, 2019, Pages 71-76]
Mohammadi, Milad Removal of Heavy Metal Particles by LTJ, ANA, SVR, BEC and MER zeolites particles: A Molecular Dynamics Simulation Study [Volume 1, Issue 2, 2015, Pages 99-111]
Mohammadi, Mohammad Experimental evaluation of a dual-function solution for reducing flue gas pollutants using low-temperature counter-diffusive combustion of methane with Au0.06-Pd0.06/Al2O3 Catalyst [Volume 10, Issue 1, 2024, Pages 41-49]
Mohammadi, Rafat Effect of physical properties on the oscillation of an acoustically levitated droplet [Volume 10, Issue 1, 2024, Pages 33-40]
Mohammadi, Toraj Investigation of mass transfer coefficients in irregular packed liquid-liquid extraction columns in the presence of various nanoparticles [Volume 3, Issue 2, 2017, Pages 113-120]
Mohammadi Zardkhoshoui, Akbar Engineered magnetic nanoparticles as recyclable Brønsted acid catalysts: Advances in particle design and applications in organic transformations [Volume 11, Issue 1, 2025, Pages 63-92]
Mohammadi Zeydi, Masoud Green preparation of tetrahydrobenzimidazo[2,1-b]quinazolin-1(2H)-ones using γ-Fe2O3@KSF as novel and recyclable magnetic catalyst [Volume 5, Issue 4, 2019, Pages 179-186]
Mohammadkhani, Arezo X-Shaped Thallium oxide nanostructures as a high performance photocatalyst for degradation of Cephalexin [Volume 5, Issue 2, 2019, Pages 117-122]
Mohammadmahdi, Saeid Numerical simulation of effect of non-spherical particle shape and bed size on hydrodynamics of packed beds [Volume 3, Issue 3, 2017, Pages 133-143]
Mohammadzadeh, Sahar Development and characterization of optimized sustained release voriconazole-loaded chitosan nanoparticles for ocular delivery [Volume 7, Issue 1, 2021, Pages 1-10]
Mohanazadeh, Farajollah A new method for the preparation of pure topiramate with a micron particle size [Volume 3, Issue 3, 2017, Pages 169-174]
Mohannazadeh, Farajollah A new method for the preparation of pure acamprosate calcium with a micron particle size [Volume 8, Issue 1, 2022, Pages 17-23]
Mohebbi-Kalhori, Davod Fabrication and optimization of superhydrophobic ZnO-SA/PVC/PVP nanocomposite membrane distillation for highly saline RO brine recovery [Volume 9, Issue 2, 2023, Pages 103-113]
Mohebbi-Kalhori, Davod Optimization of induced gas flotation parameters for removal efficiency of near-water-density oils using response surface methodology [Volume 11, Issue 1, 2025, Pages 27-37]
Mohebbizadeh, Mohammad Petrochemical wastewater treatment by modified electro-Fenton process with nano iron particles [Volume 1, Issue 4, 2015, Pages 215-223]
Moini, Omid Synthesis of Polyamide 6 by Anionic Polymerization of ε-Caprolactam in an Internal Mixer: Effect of Polymerization Reaction Time [Volume 1, Issue 2, 2015, Pages 91-98]
Moini Jazani, Omid Effective Parameters on the Phase Morphology and Mechanical Properties of PP/PET/SEBS Ternary Polymer Blends [Volume 1, Issue 1, 2015, Pages 39-48]
Moini Jazani, Omid A Review of Manufacturing Process of Polyethylene Pipe and Connectors for Applying in High-Pressure Natural Gas Pipelines [Volume 1, Issue 3, 2015, Pages 129-140]
Moini Jazani, Omid Rheological properties of modified Bitumen: Comparison of waste polymers’ performance [Volume 1, Issue 4, 2015, Pages 205-213]
Moini Jazani, Omid Morphology and Mechanical Properties Investigation of Binary Polymer Blends Based on PP/SEBS and PP/PC [Volume 2, Issue 3, 2016, Pages 183-191]
Mokari, Reyhaneh Application of Fe3O4@THAM-CH2CH2Cl magnetic nanoparticle as a new adsorbent in ultrasonically assisted removal of Congo red from aqueous solutions [Volume 8, Issue 2, 2022, Pages 103-114]
Mokhtarian, Nader Sonochemical synthesis of γ-Fe2O3 nanoparticles for cancer hyperthermia [Volume 10, Issue 2, 2024, Pages 97-107]
Molla-Abbasi, Payam Modified CNTs/Nafion composite: The role of sulfonate groups on the performance of prepared proton exchange methanol fuel cell’s membrane [Volume 3, Issue 4, 2017, Pages 211-218]
Mollabagher, Hoda Development and characterization of optimized sustained release voriconazole-loaded chitosan nanoparticles for ocular delivery [Volume 7, Issue 1, 2021, Pages 1-10]
Mollaei, Saeed A green approach for the synthesis of silver nanoparticles using Lithospermum officinale root extract and evaluation of their antioxidant activity [Volume 3, Issue 4, 2017, Pages 187-195]
Molyanyan, Elham Adsorption of CO2 and SO2 on multi-walled carbon nanotubes: experimental data and modeling using artificial neural network [Volume 5, Issue 1, 2019, Pages 33-45]
Momeni Landi, Mahnoush Theoretical study of the tautomerization of Carmustine in a biological media as an anti-cancer drug [Volume 7, Issue 1, 2021, Pages 51-57]
Moradi, Abed MHD Three-Dimensional Stagnation-Point Flow and Heat Transfer of a Nanofluid over a Stretching Sheet [Volume 1, Issue 3, 2015, Pages 141-151]
Moradi, Abed Effects of Brownian motion and Thermophoresis on MHD Mixed Convection Stagnation-point Flow of a Nanofluid Toward a Stretching Vertical Sheet in Porous Medium [Volume 1, Issue 4, 2015, Pages 225-240]
Morshedian, Jalil On study of X-ray absorption and properties of dispersion of W, MoS2 and B4C particles in high density polyethylene [Volume 3, Issue 1, 2017, Pages 13-24]
Mostafaeian, Mehdi A Review of Manufacturing Process of Polyethylene Pipe and Connectors for Applying in High-Pressure Natural Gas Pipelines [Volume 1, Issue 3, 2015, Pages 129-140]
Mottahedin, Pouya Application of modified bentonite for efficient water purification: A case of Cr(VI) adsorption [Volume 10, Issue 2, 2024, Pages 117-128]
Mousavi, Seyedeh Neda Optimization of an ecofriendly coating containing chitosan and gelatin as corrosion inhibitor of carbon steel grade E by Response Surface Method [Volume 5, Issue 1, 2019, Pages 23-31]
Mousavian, Mohammad Ali Application of response surface methodology for thorium(IV) removal using Amberlite IR-120 and IRA-400: Ion exchange equilibrium and kinetics [Volume 3, Issue 2, 2017, Pages 101-112]
Movahedirad, Salman Evaluation of the effect of granulation processing parameters on the granule properties: Lactose- Cornstarch case study [Volume 1, Issue 3, 2015, Pages 171-182]
Mozayyeni, Afsaneh Photocatalytic degradation of methyl orange using TiO2:Mg2+/zeolite composite under visible light irradiation [Volume 6, Issue 1, 2020, Pages 1-12]
Mubarak, Sanni Assessment of an atmospheric heavy metal from a transport pool within the Ilorin Metropolis, Nigeria [Volume 7, Issue 1, 2021, Pages 11-21]
Muhibbudin, Ismail ESecondary organic aerosol and ozone formation potentials from diesel engine emissions at Isale-Koto, Ilorin, Kwara State, Nigeria [Volume 11, Issue 1, 2025, Pages 53-61]
Muhibbudin, Ismail EToxicity and carcinogenic potentials of particulate-bound polycyclic aromatic hydrocarbons emitted at the epicenter of major abattoirs in Ilorin Metropolis, Kwara State, Nigeria [Volume 11, Issue 1, 2025, Pages 39-51]
Muhibbudin, Ismail Eniola Assessment of an atmospheric heavy metal from a transport pool within the Ilorin Metropolis, Nigeria [Volume 7, Issue 1, 2021, Pages 11-21]
N
Najafi, Fatemeh Synthesis and characterization of the aminated nano-zeolite: A green heterogeneous nanocatalyst for the synthesis of valuable organic compounds [Volume 8, Issue 1, 2022, Pages 53-62]
Naji, Jalil Approximation and analytical study of the relativistic confined two particles state within the complex potential in the isotropic medium [Volume 9, Issue 2, 2023, Pages 85-101]
Najibzade, Yasaman The computational study of the tautomerization of Dacarbazine in a biological system: The DFT approach [Volume 6, Issue 1, 2020, Pages 55-60]
Namazi, Mohammadmehdi Geometric parameters effect on the reaction zone of premixed CH4 catalytic combustion in a fibrous porous medium [Volume 8, Issue 1, 2022, Pages 1-7]
Namazi, Mohammadmehdi Experimental evaluation of a dual-function solution for reducing flue gas pollutants using low-temperature counter-diffusive combustion of methane with Au0.06-Pd0.06/Al2O3 Catalyst [Volume 10, Issue 1, 2024, Pages 41-49]
Nasiri, Farough Surface decorated magnetite nanoparticles with birhodanine and MoO2Cl2(dmf)2 as a new magnetic catalyst for epoxidation of olefins [Volume 5, Issue 1, 2019, Pages 47-60]
Nejadi, Forogh Effect of the smallest microwave-synthesized Cu2S nanoparticles with surfactant templates on improving the properties of engine oil [(Articles in Press)]
Nekokar, Nariman Effects of Fe2O3 addition and mechanical activation on thermochemical heat storage properties of the Co3O4/CoO system [Volume 4, Issue 1, 2018, Pages 13-22]
Nemat-Bakhsh, Nabi Zn2SnO4 nanostructure as an efficient catalyst for the preparation of pyrano[3,2-c]chromene and pyrano[4,3-b]pyran derivatives under ultrasonic irradiation conditions [Volume 5, Issue 1, 2019, Pages 61-69]
Noori, Amir Numerical investigation of the effect of nanoparticle sedimentation on the thermal behavior of cavities with different cross-sectional shapes [Volume 9, Issue 2, 2023, Pages 73-84]
Norouzbeigi, Reza Removal of crystal violet from aquatic environment by surfactant-modified dolomite [Volume 2, Issue 3, 2016, Pages 173-182]
Norouzbeigi, Reza A comparative study of malachite green removal from an aqueous solution using raw and chemically modified expanded perlite [Volume 3, Issue 2, 2017, Pages 79-87]
Nourmohammadi, Abolghasem Synthesis, structural characterization and catalytic activity of TiO2/Al2O3 photo-composite [Volume 1, Issue 1, 2015, Pages 31-38]
O
Ogede, Robert OluwaseyiTalinum triangulare leaf and Musa sapientum peel extracts as corrosion inhibitors on ZA-27 Alloy [Volume 4, Issue 1, 2018, Pages 23-28]
Omidvar, Maryam Synthesis and Statistical Analysis of Changing Size of Nano-structured PbO2 during Mechanical Milling Using Taguchi Methodology [Volume 2, Issue 1, 2016, Pages 49-54]
Omidvar, Maryam Dynamic modelling of hardness changes of aluminium nanostructure during mechanical ball milling process [Volume 3, Issue 1, 2017, Pages 25-32]
Omugbe, Ekwevugb Effects of hybrid confinement potential on predictable hadronic highly resonance states [Volume 11, Issue 1, 2025, Pages 1-10]
Osman, Ramag AhmedPreliminary study on upgrading silica sand from the Elwadi Elgedid, Western Desert, Egypt for compatibility with various industrial applications [Volume 7, Issue 2, 2021, Pages 107-117]
Osouli, Karim Investigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite [Volume 1, Issue 2, 2015, Pages 85-90]
Ozkan, Alper Effect of ultrasound on the dispersion of kaolinite and sepiolite suspensions with and without sodium silicate [Volume 6, Issue 1, 2020, Pages 47-54]
P
Pakmehr, Mohammad Synthesis, structural characterization and catalytic activity of TiO2/Al2O3 photo-composite [Volume 1, Issue 1, 2015, Pages 31-38]
Panahi, Hanieh Modeling of splat particle splashing data during thermal spraying with the Burr distribution [Volume 3, Issue 1, 2017, Pages 41-50]
Panahi, Hanieh Point and interval evaluation of nanoparticles censored sample in the spray process [Volume 5, Issue 2, 2019, Pages 91-99]
Parvareh, Arsalan Composite processing and study of properties for polypropylene EPD60R/modified nanoclay Cloisite® 15A [Volume 5, Issue 2, 2019, Pages 101-108]
Parvin, Nader Ultrasonic assisted cold compaction of CP titanium and Ti-6Al-4V alloy [Volume 10, Issue 2, 2024, Pages 87-96]
Parvizi, Soroush Evaluation of breakage and coalescence kernel constants for a mixer tank in the copper solvent extraction unit [Volume 6, Issue 1, 2020, Pages 13-23]
Pazoki, Hossein Investigation of phosphate adsorption from aqueous media using synthetic mordenite and modified natural clinoptilolite zeolite adsorbents: characteristics, kinetics, and isotherms [Volume 7, Issue 2, 2021, Pages 119-130]
Pejman, Melika Effect of the smallest microwave-synthesized Cu2S nanoparticles with surfactant templates on improving the properties of engine oil [(Articles in Press)]
Peyvandi, Kiana Enhanced sulfate removal from aqueous solution using ion-exchanged clinoptilolite: A study on adsorption efficiency and process optimization [Volume 10, Issue 2, 2024, Pages 73-86]
Pourabdoli, Mehdi Effects of Fe2O3 addition and mechanical activation on thermochemical heat storage properties of the Co3O4/CoO system [Volume 4, Issue 1, 2018, Pages 13-22]
Pourabdoli, Mehdi Theoretical thermodynamics and practical kinetics studies of oxygen desorption from Co3O4-5 wt% Al2O3 and Co3O4-5 wt% Y2O3 composites [Volume 5, Issue 1, 2019, Pages 13-21]
Pouzesh, Maryam Electrophoretic deposition and corrosion behavior study of aluminum coating on AZ91D substrate [Volume 3, Issue 4, 2017, Pages 219-232]
R
Rabiei, Khadijeh Synthesis and characterization of the aminated nano-zeolite: A green heterogeneous nanocatalyst for the synthesis of valuable organic compounds [Volume 8, Issue 1, 2022, Pages 53-62]
Rafigh Esmaeilzaei, Masoud Single-stage solution combustion preparation of ZnFe2O4-ZnS nanoparticles as dye adsorbent: Effect of fuel to oxidant and Zn to Fe molar ratios [Volume 6, Issue 2, 2020, Pages 113-122]
Rahbar Kelishami, Ahmad Equilibrium, kinetic, and thermodynamic applications for methylene blue removal using Buxus sempervirens leaf powder as a powerful low-cost adsorbent [Volume 5, Issue 4, 2019, Pages 161-170]
Rahbar-Kelishami, Ahmad Removal of crystal violet from aquatic environment by surfactant-modified dolomite [Volume 2, Issue 3, 2016, Pages 173-182]
Rahbar-Kelishami, Ahmad A comparative study of malachite green removal from an aqueous solution using raw and chemically modified expanded perlite [Volume 3, Issue 2, 2017, Pages 79-87]
Rahbar-Kelishami, Ahmad Investigation of mass transfer coefficients in irregular packed liquid-liquid extraction columns in the presence of various nanoparticles [Volume 3, Issue 2, 2017, Pages 113-120]
Rahimi, Amir Enhancement in energy and exergy efficiency of a solar receiver using suspended alumina nanparticles (nanofluid) as heat transfer fluid [Volume 1, Issue 2, 2015, Pages 73-83]
Rahimi, Esmaeil Analyzing the effect of gradation on specific gravity and viscosity of barite powder used in excavation mud [Volume 3, Issue 3, 2017, Pages 163-167]
Rahimi, Esmaeil The effect of microwave radiation on grinding kinetics by selection function and breakage function - A case study of low-grade siliceous manganese ores [Volume 4, Issue 1, 2018, Pages 39-47]
Rahimi, Mahmood Reza Effect of process parameters on quality properties and drying time of hawthorn in a vibro-fluidized bed dryer [Volume 3, Issue 1, 2017, Pages 51-62]
Rahimi, Majid A modified Marmottant model to study the effects of a shell rupture on the subharmonic threshold of encapsulated microbubbles [Volume 7, Issue 1, 2021, Pages 41-50]
Rahmani, Mashaallah Preparation and application of meso-adsorbent NiFe2O4 for the ultrasound-enhanced removal of dye pollutant in water and wastewater: A multivariate study [Volume 6, Issue 2, 2020, Pages 103-111]
Rahmani, Mashaallah Application of Fe3O4@THAM-CH2CH2Cl magnetic nanoparticle as a new adsorbent in ultrasonically assisted removal of Congo red from aqueous solutions [Volume 8, Issue 2, 2022, Pages 103-114]
Rahmani, Mohammad Bagher Effect of Sn Doping on Structural and Optical Properties of 2D α-MoO3 Nanostructures [Volume 2, Issue 2, 2016, Pages 87-93]
Rahmaninia, Arman Surface decorated magnetite nanoparticles with birhodanine and MoO2Cl2(dmf)2 as a new magnetic catalyst for epoxidation of olefins [Volume 5, Issue 1, 2019, Pages 47-60]
Rahman-Setayesh, Mohammad Reza Equilibrium, kinetic, and thermodynamic applications for methylene blue removal using Buxus sempervirens leaf powder as a powerful low-cost adsorbent [Volume 5, Issue 4, 2019, Pages 161-170]
Ramezani Azghandi, Omid Synthesis and Statistical Analysis of Changing Size of Nano-structured PbO2 during Mechanical Milling Using Taguchi Methodology [Volume 2, Issue 1, 2016, Pages 49-54]
Ranjbar, Maryam Effects of catalyst particle size on methanol dehydration at different temperatures and weight hourly space velocities [Volume 2, Issue 1, 2016, Pages 41-47]
Ranjbar, Maryam Synthesis of pure monoclinic zirconia nanoparticles using ultrasound cavitation technique [Volume 2, Issue 2, 2016, Pages 69-77]
Ranjbar, Maryam Ultrasonic synthesis of Zn(II) methionine and ZnO nanostructures as a new precursor for ZnO nanoparticles and in-vitro study [Volume 5, Issue 2, 2019, Pages 109-116]
Ranjbar, Maryam Synthesizing Fe3O4, Mn3O4 and Mn3O4/Fe3O4 nanocatalysts using the sol-gel method as new precursors for the degradation of phenol by catalytic ozonation [Volume 8, Issue 1, 2022, Pages 39-51]
Rashidi Huyeh, Majid Microstructure and optical properties of lustre glazes produced on a copper body [Volume 9, Issue 2, 2023, Pages 115-123]
Rasouli, Susan Inhibition of Staphylococcus aureus growth in fresh calf minced meat using low density Polyethylene films package promoted by titanium dioxide and zinc oxide nanoparticles [Volume 3, Issue 1, 2017, Pages 1-11]
Rayati, Saeed X-Shaped Thallium oxide nanostructures as a high performance photocatalyst for degradation of Cephalexin [Volume 5, Issue 2, 2019, Pages 117-122]
Riazi, Hossein Effective Parameters on the Phase Morphology and Mechanical Properties of PP/PET/SEBS Ternary Polymer Blends [Volume 1, Issue 1, 2015, Pages 39-48]
Riazi, Hossein A Review of Manufacturing Process of Polyethylene Pipe and Connectors for Applying in High-Pressure Natural Gas Pipelines [Volume 1, Issue 3, 2015, Pages 129-140]
Riazi, Hossein Rheological properties of modified Bitumen: Comparison of waste polymers’ performance [Volume 1, Issue 4, 2015, Pages 205-213]
Rostami, Elahe A comparative study of malachite green removal from an aqueous solution using raw and chemically modified expanded perlite [Volume 3, Issue 2, 2017, Pages 79-87]
Rostamizadeh, Nader Hollow alumina nanospheres as novel catalyst for the conversion of methanol to dimethyl ether [Volume 2, Issue 1, 2016, Pages 15-22]
Roudini, Ghodratollah Mechanical behavior of magnesium-steel particles composites with interpenetrating phases [Volume 9, Issue 1, 2023, Pages 29-34]
Roudini, Ghodratollah Fabrication method, microstructural characteristics, and hardness behavior of an interpenetrating phases hybrid aluminum/alumina-nanodiamond composite [Volume 9, Issue 2, 2023, Pages 63-71]
S
Sabzyan, Hasan The measurement of droplet size distribution of water-oil emulsion through NMR method [Volume 2, Issue 1, 2016, Pages 31-39]
Sadjadi, S. A. Hollow alumina nanospheres as novel catalyst for the conversion of methanol to dimethyl ether [Volume 2, Issue 1, 2016, Pages 15-22]
Sadri, Minoo Optimization of an ecofriendly coating containing chitosan and gelatin as corrosion inhibitor of carbon steel grade E by Response Surface Method [Volume 5, Issue 1, 2019, Pages 23-31]
Saeedi Razavi, Behzad The effect of adding nano-silica on the ultrasonic pulse velocity of geopolymer concrete [Volume 7, Issue 2, 2021, Pages 99-105]
Saffar Teluri, Ali Synthesis, structural characterization and catalytic activity of TiO2/Al2O3 photo-composite [Volume 1, Issue 1, 2015, Pages 31-38]
Saffarzadeh-Matin, Shohreh Maltodextrine nanoparticles loaded with polyphenolic extract from apple industrial waste: preparation, optimization and characterization [Volume 3, Issue 4, 2017, Pages 197-209]
Salehi, Mohammad Mahdi Effective Parameters on the Phase Morphology and Mechanical Properties of PP/PET/SEBS Ternary Polymer Blends [Volume 1, Issue 1, 2015, Pages 39-48]
Salehi, Mohammad Mahdi Synthesis of Polyamide 6 by Anionic Polymerization of ε-Caprolactam in an Internal Mixer: Effect of Polymerization Reaction Time [Volume 1, Issue 2, 2015, Pages 91-98]
Salehi, Mohammad Mahdi A Review of Manufacturing Process of Polyethylene Pipe and Connectors for Applying in High-Pressure Natural Gas Pipelines [Volume 1, Issue 3, 2015, Pages 129-140]
Samimi, Abdolreza Mono-Size Distribution Index (MSDI): A new criterion for the quantitative description of size distribution [Volume 5, Issue 2, 2019, Pages 71-76]
Samimi, Abdolreza Fabrication and optimization of superhydrophobic ZnO-SA/PVC/PVP nanocomposite membrane distillation for highly saline RO brine recovery [Volume 9, Issue 2, 2023, Pages 103-113]
Samimi, Abdolreza Optimization of induced gas flotation parameters for removal efficiency of near-water-density oils using response surface methodology [Volume 11, Issue 1, 2025, Pages 27-37]
Samimi, Mohsen Optimization of the Ba+2 uptake in the formation process of hydrogels using central composite design: Kinetics and thermodynamic studies of malachite green removal by Ba-alginate particles [Volume 6, Issue 2, 2020, Pages 95-102]
Sarani, Behnaz Preparation and application of meso-adsorbent NiFe2O4 for the ultrasound-enhanced removal of dye pollutant in water and wastewater: A multivariate study [Volume 6, Issue 2, 2020, Pages 103-111]
Saravani, Hamideh Single-stage solution combustion preparation of ZnFe2O4-ZnS nanoparticles as dye adsorbent: Effect of fuel to oxidant and Zn to Fe molar ratios [Volume 6, Issue 2, 2020, Pages 113-122]
Saravani, Hamideh Combustion synthesis of sponge-like CeO2 powder for selective determination of uric acid in biological fluids [Volume 7, Issue 2, 2021, Pages 73-82]
Sarhaddi, Faramarz Extending the Allowable Exposure Time of Rotating X-ray Anodes via an Embedded Lithium Pulsating Heat Pipe: A 3D Multiphase Analysis [(Articles in Press)]
Seyedsadjadi, Mirabdullah Hollow alumina nanospheres as novel catalyst for the conversion of methanol to dimethyl ether [Volume 2, Issue 1, 2016, Pages 15-22]
Shafiee Afarani, Mahdi Preparation of pure cordierite through heat treatment of combustion synthesized magnesium aluminate spinel and silica nanoparticles [Volume 9, Issue 1, 2023, Pages 11-18]
Shafiei, Ali Approximation and analytical study of the relativistic confined two particles state within the complex potential in the isotropic medium [Volume 9, Issue 2, 2023, Pages 85-101]
Shahbakhsh, Mehdi Combustion synthesis of sponge-like CeO2 powder for selective determination of uric acid in biological fluids [Volume 7, Issue 2, 2021, Pages 73-82]
Shahbakhsh, Mehdi Adsorption of methylene blue on lithium titanate and its composite with carbon dots: Optimization of parameters and adsorbent recovery [Volume 11, Issue 2, 2025, Pages 101-116]
Shahbazi, Majid Maltodextrine nanoparticles loaded with polyphenolic extract from apple industrial waste: preparation, optimization and characterization [Volume 3, Issue 4, 2017, Pages 197-209]
Shahedi, Zeynab Fe3O4@SiO2–SO3H Nanoparticles: An efficient magnetically retrievable catalyst for esterification reactions [Volume 4, Issue 2, 2018, Pages 67-79]
Shahsavari, Shadab Development and characterization of optimized sustained release voriconazole-loaded chitosan nanoparticles for ocular delivery [Volume 7, Issue 1, 2021, Pages 1-10]
Shahvelayati, Ashraf S. ZnS/ZnO heterostructure semiconductor: A promising ionic liquid media approach without calcination [Volume 8, Issue 2, 2022, Pages 115-119]
Shakhi, Amal Fabrication of Zn1-XCuXO nanoparticles and investigation of their effect on the thermal conductivity of nanofluids [Volume 8, Issue 2, 2022, Pages 95-102]
Shakoory, Mehdi Effect of Zr particles and RRA heat treatment on properties and grain boundary precipitation of 7055 Aluminum alloys [Volume 11, Issue 2, 2025, Pages 93-100]
Shakouri, Milad A green approach for the synthesis of silver nanoparticles using Lithospermum officinale root extract and evaluation of their antioxidant activity [Volume 3, Issue 4, 2017, Pages 187-195]
Shalmashi, Anvar Iranian natural zeolite particle modification: Green synthesis, characterization, and oil spill remediation [Volume 5, Issue 2, 2019, Pages 77-90]
Sharifitabar, Mahmood Combustion synthesis of sponge-like CeO2 powder for selective determination of uric acid in biological fluids [Volume 7, Issue 2, 2021, Pages 73-82]
Shayesteh, Hadi Equilibrium, kinetic, and thermodynamic applications for methylene blue removal using Buxus sempervirens leaf powder as a powerful low-cost adsorbent [Volume 5, Issue 4, 2019, Pages 161-170]
Shayesteh, Keivan Analysis of effective parameters on cadmium cementation reaction from the perspective of diffusion [Volume 6, Issue 2, 2020, Pages 81-93]
Sheikhhosseini, Enayatollah The computational study of the tautomerization of Dacarbazine in a biological system: The DFT approach [Volume 6, Issue 1, 2020, Pages 55-60]
Sheshmani, Shabnam ZnS/ZnO heterostructure semiconductor: A promising ionic liquid media approach without calcination [Volume 8, Issue 2, 2022, Pages 115-119]
Sheykholeslami, Mohammad Reza Effect of physical properties on the oscillation of an acoustically levitated droplet [Volume 10, Issue 1, 2024, Pages 33-40]
Shiroud Ghorbani, Saghi Green preparation of tetrahydrobenzimidazo[2,1-b]quinazolin-1(2H)-ones using γ-Fe2O3@KSF as novel and recyclable magnetic catalyst [Volume 5, Issue 4, 2019, Pages 179-186]
Shojaei, Fatemeh Feasibility study on the use of MIL-53(Al) as a support for iron catalysts in the CO hydrogenation reaction [Volume 9, Issue 1, 2023, Pages 43-49]
Shokrollahzadeh, Soheila Improvement in photocatalysts and photocatalytic reactors for water and wastewater treatment: A review [Volume 2, Issue 3, 2016, Pages 119-140]
Shokrollahzadeh, Soheila Synthesizing Fe3O4, Mn3O4 and Mn3O4/Fe3O4 nanocatalysts using the sol-gel method as new precursors for the degradation of phenol by catalytic ozonation [Volume 8, Issue 1, 2022, Pages 39-51]
Sobati, Mohammad Amin An experimental investigation on drying kinetics of calcium carbonate [Volume 1, Issue 3, 2015, Pages 153-162]
Sobati, Mohammad Amin Evaluation of the effect of granulation processing parameters on the granule properties: Lactose- Cornstarch case study [Volume 1, Issue 3, 2015, Pages 171-182]
Sobati, Mohammad Amin Drying of calcium carbonate in a batch spouted bed dryer: optimization and kinetics modeling [Volume 3, Issue 2, 2017, Pages 89-99]
Soeezi, Amirhossein Analyzing the effect of gradation on specific gravity and viscosity of barite powder used in excavation mud [Volume 3, Issue 3, 2017, Pages 163-167]
Solaimany Nazar, Ali Reza The measurement of droplet size distribution of water-oil emulsion through NMR method [Volume 2, Issue 1, 2016, Pages 31-39]
Soltanokottabi, Fariba Effective Parameters on the Phase Morphology and Mechanical Properties of PP/PET/SEBS Ternary Polymer Blends [Volume 1, Issue 1, 2015, Pages 39-48]
Soudbar, Davood Composite processing and study of properties for polypropylene EPD60R/modified nanoclay Cloisite® 15A [Volume 5, Issue 2, 2019, Pages 101-108]
Subtil, Andreza Germana da SilvaBiosynthesis of nanoparticles by fungus Monacrosporium thaumasium and its action on egg masses of the snail Biomphalaria glabrata[Volume 10, Issue 1, 2024, Pages 9-17]
Sumitha Celin, Thangadurai Luminescence quenching studies of [Ru(dMeObpy)3]2+ complex using the quinone derivative-effect of micelles [Volume 9, Issue 1, 2023, Pages 35-42]
T
Taheri, Morteza Effect of Zr particles and RRA heat treatment on properties and grain boundary precipitation of 7055 Aluminum alloys [Volume 11, Issue 2, 2025, Pages 93-100]
Talaei, Alireza Morphology and Mechanical Properties Investigation of Binary Polymer Blends Based on PP/SEBS and PP/PC [Volume 2, Issue 3, 2016, Pages 183-191]
Talaie, Mohammad Reza Adsorption of CO2 and SO2 on multi-walled carbon nanotubes: experimental data and modeling using artificial neural network [Volume 5, Issue 1, 2019, Pages 33-45]
Tamim, Hossein CFD simulations on natural convection heat transfer of alumina-water nanofluid with Brownian motion effect in a 3-D enclosure [Volume 2, Issue 3, 2016, Pages 163-171]
Tavakoli Gheinani, Touraj Enhancement in energy and exergy efficiency of a solar receiver using suspended alumina nanparticles (nanofluid) as heat transfer fluid [Volume 1, Issue 2, 2015, Pages 73-83]
Tayeb Oskoie, Parya Fe3O4@ZrO2-SO3H Nanoparticles: A new magnetically retrievable catalyst for esterification of mono- and dicarboxylic acids [Volume 4, Issue 1, 2018, Pages 1-12]
Tohidlou, Esmaeil Effect of surface-functionalization of Na+-montmorillonite nanoclay using 3-aminopropyltrimethoxy silane on the mechanical properties of E-glass chopped strand mat/epoxy composites [Volume 4, Issue 2, 2018, Pages 59-65]
Tohidlou, Esmaeil Effect of ZrSiO4 particles on the wear properties of as-cast Al matrix particulate composites fabricated via various casting routes [Volume 5, Issue 4, 2019, Pages 171-177]
Tohidlou, Esmaeil Effect of graphene nanoplatelets on the microstructure and mechanical behavior of erbium-modified Al-7.5Si-0.5Mg alloy [Volume 6, Issue 1, 2020, Pages 37-45]
Toraman, Oner Yusuf Grinding-aid effect on the colour properties (Ry, whiteness and yellowness) of calcite in stirred media milling [Volume 2, Issue 1, 2016, Pages 23-29]
U
Usefzaei, Tahereh Microstructure and optical properties of lustre glazes produced on a copper body [Volume 9, Issue 2, 2023, Pages 115-123]
V
Vahdat Azad, Abazar Effect of Radiation Heat Loss and Ventilation on Dust Explosions in Spherical Vessels [Volume 1, Issue 1, 2015, Pages 57-64]
Vahdat Azad, Abazar Effect of the temperature difference between gas and organic dust on propagating spherical flames [Volume 2, Issue 3, 2016, Pages 151-161]
Vahidfard, Vahid Analysis of effective parameters on cadmium cementation reaction from the perspective of diffusion [Volume 6, Issue 2, 2020, Pages 81-93]
Vakilpour, Saeed Effects of Temperature and Particle Size Distribution on Barite Reduction by Carbon monoxide Gas [Volume 2, Issue 2, 2016, Pages 79-85]
Varaminian, Farshad Synthesis and characterization of Polyaniline Nanocomposite by Using Several Types of Surfactants in Aqueous Media [Volume 1, Issue 3, 2015, Pages 163-170]
Vasseghian, Yasser Ash and sulphur removal from bitumen using column flotation technique: Experimental and response surface methodology modeling [Volume 2, Issue 1, 2016, Pages 1-13]
Vazan, Mohammad One-Pot solvent-free synthesis of Highly Substituted Imidazoles catalyzed by zeolite [Volume 1, Issue 4, 2015, Pages 253-263]
Vaziri, Raheleh Computational study of electronic, spectroscopic, and chemical properties of (CdO)n (n=1-7) nanoclusters as a transparent conducting oxide [Volume 1, Issue 4, 2015, Pages 195-204]
Vesal, Ali Investigation of mass transfer coefficients in irregular packed liquid-liquid extraction columns in the presence of various nanoparticles [Volume 3, Issue 2, 2017, Pages 113-120]
Veys Karami, Reza Morphology and Mechanical Properties Investigation of Binary Polymer Blends Based on PP/SEBS and PP/PC [Volume 2, Issue 3, 2016, Pages 183-191]
Y
Yavari, Zahra Adsorption of methylene blue on lithium titanate and its composite with carbon dots: Optimization of parameters and adsorbent recovery [Volume 11, Issue 2, 2025, Pages 101-116]
Yousefi, Mostafa Synthesis of pure monoclinic zirconia nanoparticles using ultrasound cavitation technique [Volume 2, Issue 2, 2016, Pages 69-77]
Z
Zahed, Mojgan Mechanical behavior of magnesium-steel particles composites with interpenetrating phases [Volume 9, Issue 1, 2023, Pages 29-34]
Zahedi, Mir Mahdi Enhanced photocatalytic degradation of 2,4-dichlorophenol in water solution using Sr-doped ZnAl2O4 nanoparticles [Volume 4, Issue 2, 2018, Pages 101-109]
Zahedipoor, Ahmadreza Pool boiling heat transfer coefficient of pure liquids using dimensional analysis [Volume 3, Issue 2, 2017, Pages 63-69]
Zahraee, Seyed Mohammad Effect of ion concentration on viscosity, electrical conductivity and deposit weight of doped nano alumina prepared by electrophoretic deposition [Volume 2, Issue 2, 2016, Pages 55-68]
Zahraee, Seyed Mohammad Experimental Investigation of Metal Powder Compaction without Using Lubricant [Volume 2, Issue 3, 2016, Pages 141-149]
Zakeri, Mozhgan Mono-Size Distribution Index (MSDI): A new criterion for the quantitative description of size distribution [Volume 5, Issue 2, 2019, Pages 71-76]
Zamani souderjani, Ehsan Application of response surface methodology for thorium(IV) removal using Amberlite IR-120 and IRA-400: Ion exchange equilibrium and kinetics [Volume 3, Issue 2, 2017, Pages 101-112]
Zare, Shahryar Experimental evaluation of a dual-function solution for reducing flue gas pollutants using low-temperature counter-diffusive combustion of methane with Au0.06-Pd0.06/Al2O3 Catalyst [Volume 10, Issue 1, 2024, Pages 41-49]
Zeinali Moghaddam, Hassan Fabrication method, microstructural characteristics, and hardness behavior of an interpenetrating phases hybrid aluminum/alumina-nanodiamond composite [Volume 9, Issue 2, 2023, Pages 63-71]
Zeraati, Malihe Predictive modeling of the length of prepared CNT by CVD through ANN-MPSO and GEP [Volume 5, Issue 4, 2019, Pages 145-159]
Ziyaadini, Morteza Enhanced photocatalytic degradation of 2,4-dichlorophenol in water solution using Sr-doped ZnAl2O4 nanoparticles [Volume 4, Issue 2, 2018, Pages 101-109]
Zohdi, Seyyed Hossein Feasibility study on the use of MIL-53(Al) as a support for iron catalysts in the CO hydrogenation reaction [Volume 9, Issue 1, 2023, Pages 43-49]
Zolfaghari, Reza Crushing analysis of the industrial cage mill and the laboratory jaw crusher [Volume 3, Issue 3, 2017, Pages 155-161]
