Author Index

A

  • Abbasi, Pourya Analysis of effective parameters on cadmium cementation reaction from the perspective of diffusion [Volume 6, Issue 2, 2020, Pages 81-93]
  • Abbasian, َAhmad Reza Single-stage solution combustion preparation of ZnFe2O4-ZnS nanoparticles as dye adsorbent: effect of fuel to oxidant and Zn to Fe molar ratios [(Articles in Press)]
  • Abbasian, Ahmad Reza Preparation and application of meso-adsorbent NiFe2O4 for the ultrasound-enhanced removal of dye pollutant in water and wastewater: A multivariate study [Volume 6, Issue 2, 2020, Pages 103-111]
  • Abegunde, Segun Michael Talinum triangulare leaf and Musa sapientum peel extracts as corrosion inhibitors on ZA-27 Alloy [Volume 4, Issue 1, 2018, Pages 23-28]
  • Abolghandi, Ali Effects of local vibration on silo discharge and jamming: Employing an experimental approach [Volume 4, Issue 2, 2018, Pages 91-100]
  • Adimi, Maryam Petrochemical wastewater treatment by modified electro-Fenton process with nano iron particles [Volume 1, Issue 4, 2015, Pages 215-223]
  • Afshar, Maryam On study of X-ray absorption and properties of dispersion of W, MoS2 and B4C particles in high density polyethylene [Volume 3, Issue 1, 2017, Pages 13-24]
  • Afshar Ebrahimi, Ali FCC catalyst attrition behavior at high temperatures [Volume 5, Issue 4, 2019, Pages 135-143]
  • Aghaei Hakkak, Rouzbeh Ultrasonic synthesis of Zn(II) methionine and ZnO nanostructures as a new precursor for ZnO nanoparticles and in-vitro study [Volume 5, Issue 2, 2019, Pages 109-116]
  • Aghajani, Hossein Electrophoretic deposition and corrosion behavior study of aluminum coating on AZ91D substrate [Volume 3, Issue 4, 2017, Pages 219-232]
  • Aghamiri, Seyedfoad Adsorption of CO2 and SO2 on multi-walled carbon nanotubes: experimental data and modeling using artificial neural network [Volume 5, Issue 1, 2019, Pages 33-45]
  • Aghamiri, Seyed Foad The effects of suspending medium on dielectrophoretic systems for separating and sorting carbon nanotubes [Volume 5, Issue 4, 2019, Pages 123-134]
  • Ahmadi, Mojtaba Ash and sulphur removal from bitumen using column flotation technique: Experimental and response surface methodology modeling [Volume 2, Issue 1, 2016, Pages 1-13]
  • Ahmadi, Rahman The effect of microwave radiation on grinding kinetics by selection function and breakage function - A case study of low-grade siliceous manganese ores [Volume 4, Issue 1, 2018, Pages 39-47]
  • Ahmadi, Sayed Ali The computational study of the tautomerization of Dacarbazine in a biological system: The DFT approach [Volume 6, Issue 1, 2020, Pages 55-60]
  • Ahmadi, Seyyed Javad Xenon and krypton separation in a chromatographic column packed with granulated nano NaY zeolite [Volume 1, Issue 1, 2015, Pages 49-55]
  • Ahmadi, Shervin On study of X-ray absorption and properties of dispersion of W, MoS2 and B4C particles in high density polyethylene [Volume 3, Issue 1, 2017, Pages 13-24]
  • Akbari Javar, Hamid Development and Characterization of Optimized Sustained Release Voriconazole-Loaded Chitosan Nanoparticles for Ocular Delivery [(Articles in Press)]
  • Akhgar, Mohammad Reza The computational study of the tautomerization of Dacarbazine in a biological system: The DFT approach [Volume 6, Issue 1, 2020, Pages 55-60]
  • Alavi, Seyed Masoud Effect of graphene nanoplatelets on the microstructure and mechanical behavior of erbium-modified Al-7.5Si-0.5Mg alloy [Volume 6, Issue 1, 2020, Pages 37-45]
  • Alipour, Amin Optimization of an ecofriendly coating containing chitosan and gelatin as corrosion inhibitor of carbon steel grade E by Response Surface Method [Volume 5, Issue 1, 2019, Pages 23-31]
  • Aliu, Ebenezer Tayo Talinum triangulare leaf and Musa sapientum peel extracts as corrosion inhibitors on ZA-27 Alloy [Volume 4, Issue 1, 2018, Pages 23-28]
  • Alizade Pudeh, Mohamad Analyzing the effect of gradation on specific gravity and viscosity of barite powder used in excavation mud [Volume 3, Issue 3, 2017, Pages 163-167]
  • Amani, Arash The measurement of droplet size distribution of water-oil emulsion through NMR method [Volume 2, Issue 1, 2016, Pages 31-39]
  • Amani Ghadim, Alireza A green approach for the synthesis of silver nanoparticles using Lithospermum officinale root extract and evaluation of their antioxidant activity [Volume 3, Issue 4, 2017, Pages 187-195]
  • Aminy, Mohammad Energy Modeling and Simulation including particle technologies within Single and Double Pass Solar Air Heaters [Volume 2, Issue 2, 2016, Pages 95-102]
  • Amiri Rigi, Zahra CFD simulation of pervaporation of organic aqueous mixture through silicalite nano-pore zeolite membrane [Volume 3, Issue 3, 2017, Pages 121-132]
  • Ammar, Ahmed Study of different methods to induce crosslinking of polyacrylamide for agriculture process [Volume 5, Issue 1, 2019, Pages 1-11]
  • Aosati, Sirvan Evaluation of breakage and coalescence kernel constants for a mixer tank in the copper solvent extraction unit [Volume 6, Issue 1, 2020, Pages 13-23]
  • Arabpour, Maryam Removal of crystal violet from aquatic environment by surfactant-modified dolomite [Volume 2, Issue 3, 2016, Pages 173-182]
  • Araghchi, Masoud A spray pyrolysis method for fabrication of superhydrophobic copper substrate based on modified-alumina powder by fatty acid [Volume 6, Issue 1, 2020, Pages 25-36]
  • Ardestani, Fatemeh Inhibition of Staphylococcus aureus growth in fresh calf minced meat using low density Polyethylene films package promoted by titanium dioxide and zinc oxide nanoparticles [Volume 3, Issue 1, 2017, Pages 1-11]
  • Asadi, Saeid Modeling of splat particle splashing data during thermal spraying with the Burr distribution [Volume 3, Issue 1, 2017, Pages 41-50]
  • Asadi, Saeid Point and interval evaluation of nanoparticles censored sample in the spray process [Volume 5, Issue 2, 2019, Pages 91-99]
  • Asadi, Taleb A novel application of Co3O4@SiO2 nanocomposite as an efficient and robust catalyst for the preparation of some imidazolone derivatives [Volume 4, Issue 2, 2018, Pages 111-117]
  • Asgary, Masoud A spray pyrolysis method for fabrication of superhydrophobic copper substrate based on modified-alumina powder by fatty acid [Volume 6, Issue 1, 2020, Pages 25-36]
  • Askari-Paykani, Mohsen Optimization of SiC particle distribution during compocasting of A356-SiCp composites using D-optimal experiment design [Volume 3, Issue 3, 2017, Pages 145-154]
  • Azimi, Gholamhassan The measurement of droplet size distribution of water-oil emulsion through NMR method [Volume 2, Issue 1, 2016, Pages 31-39]

B

  • Babaei, Behnam Surface decorated magnetite nanoparticles with birhodanine and MoO2Cl2(dmf)2 as a new magnetic catalyst for epoxidation of olefins [Volume 5, Issue 1, 2019, Pages 47-60]
  • Bagheri GH, Azar X-Shaped Thallium oxide nanostructures as a high performance photocatalyst for degradation of Cephalexin [Volume 5, Issue 2, 2019, Pages 117-122]
  • Bagheri Ghomi, Azar Application of CdO nanocatalyst in the acetylation of benzyl alcohols and degradation of sulfathiazole as a green approach [Volume 4, Issue 1, 2018, Pages 49-57]
  • Bahrami, Ali Optimization of an ecofriendly coating containing chitosan and gelatin as corrosion inhibitor of carbon steel grade E by Response Surface Method [Volume 5, Issue 1, 2019, Pages 23-31]
  • Baniamerian, Hamed Improvement in photocatalysts and photocatalytic reactors for water and wastewater treatment: A review [Volume 2, Issue 3, 2016, Pages 119-140]
  • Begheri Jamebozorgi, Ali Effects of local vibration on silo discharge and jamming: Employing an experimental approach [Volume 4, Issue 2, 2018, Pages 91-100]
  • Behnamfar, Mohammad Taghi Preparation of Gd2O3 nanoparticles from a new precursor and their catalytic activity for electrochemical reduction of CO2 to CO [Volume 1, Issue 1, 2015, Pages 21-30]
  • Behnamfar, Mohammad-Taghi A new precursor for preparation of magnetite (Fe3O4) nanoparticles [Volume 1, Issue 2, 2015, Pages 65-72]
  • Beigi, Sadegh An experimental investigation on drying kinetics of calcium carbonate [Volume 1, Issue 3, 2015, Pages 153-162]
  • Beigi, Sadegh Drying of calcium carbonate in a batch spouted bed dryer: optimization and kinetics modeling [Volume 3, Issue 2, 2017, Pages 89-99]
  • Beigmoradi, Razieh The effects of suspending medium on dielectrophoretic systems for separating and sorting carbon nanotubes [Volume 5, Issue 4, 2019, Pages 123-134]
  • Bezaatpour, Abolfazl Surface decorated magnetite nanoparticles with birhodanine and MoO2Cl2(dmf)2 as a new magnetic catalyst for epoxidation of olefins [Volume 5, Issue 1, 2019, Pages 47-60]
  • Bidabadi, Mehdi Effect of Radiation Heat Loss and Ventilation on Dust Explosions in Spherical Vessels [Volume 1, Issue 1, 2015, Pages 57-64]
  • Bidabadi, Mehdi Effect of the temperature difference between gas and organic dust on propagating spherical flames [Volume 2, Issue 3, 2016, Pages 151-161]
  • Bidarian, Vahid Dynamic modelling of hardness changes of aluminium nanostructure during mechanical ball milling process [Volume 3, Issue 1, 2017, Pages 25-32]
  • Bozorgi, Behrooz Microwave-assisted synthesis of molybdenum oxide nanoparticles [Volume 1, Issue 2, 2015, Pages 121-127]

C

  • Charkhi, Amir Xenon and krypton separation in a chromatographic column packed with granulated nano NaY zeolite [Volume 1, Issue 1, 2015, Pages 49-55]
  • Charkhi, Amir An experimental investigation on drying kinetics of calcium carbonate [Volume 1, Issue 3, 2015, Pages 153-162]
  • Charkhi, Amir Drying of calcium carbonate in a batch spouted bed dryer: optimization and kinetics modeling [Volume 3, Issue 2, 2017, Pages 89-99]

D

  • Dadkhah, Danial A Review of Manufacturing Process of Polyethylene Pipe and Connectors for Applying in High-Pressure Natural Gas Pipelines [Volume 1, Issue 3, 2015, Pages 129-140]
  • Daneshmand, Hamid A spray pyrolysis method for fabrication of superhydrophobic copper substrate based on modified-alumina powder by fatty acid [Volume 6, Issue 1, 2020, Pages 25-36]
  • Dehghan-Rahimi, Azadeh Enhanced photocatalytic degradation of 2,4-dichlorophenol in water solution using Sr-doped ZnAl2O4 nanoparticles [Volume 4, Issue 2, 2018, Pages 101-109]
  • Dinarvand, Saeed CFD simulations on natural convection heat transfer of alumina-water nanofluid with Brownian motion effect in a 3-D enclosure [Volume 2, Issue 3, 2016, Pages 163-171]

E

  • Ebrahim Asghari, Fahimeh Energy Modeling and Simulation including particle technologies within Single and Double Pass Solar Air Heaters [Volume 2, Issue 2, 2016, Pages 95-102]
  • Eftekhari, Amin Effect of Sn Doping on Structural and Optical Properties of 2D α-MoO3 Nanostructures [Volume 2, Issue 2, 2016, Pages 87-93]
  • Eftekhari Yazdi, Mohammad CFD simulations on natural convection heat transfer of alumina-water nanofluid with Brownian motion effect in a 3-D enclosure [Volume 2, Issue 3, 2016, Pages 163-171]
  • Elhady, Mohamed Ahmed Study of different methods to induce crosslinking of polyacrylamide for agriculture process [Volume 5, Issue 1, 2019, Pages 1-11]
  • Eliassi, Ali Effects of catalyst particle size on methanol dehydration at different temperatures and weight hourly space velocities [Volume 2, Issue 1, 2016, Pages 41-47]
  • El-Naggar, Amal A. Gamma irradiation induced surface modification of silk fabrics for antibacterial application [Volume 3, Issue 2, 2017, Pages 71-77]
  • Elnahas, Hussien Study of different methods to induce crosslinking of polyacrylamide for agriculture process [Volume 5, Issue 1, 2019, Pages 1-11]
  • El Sayed, Sahar S. Gamma irradiation induced surface modification of silk fabrics for antibacterial application [Volume 3, Issue 2, 2017, Pages 71-77]
  • Entezami, Aliakbar Investigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite [Volume 1, Issue 2, 2015, Pages 85-90]
  • Eslami, Shahab Pool boiling heat transfer coefficient of pure liquids using dimensional analysis [Volume 3, Issue 2, 2017, Pages 63-69]
  • Eslami-Farsani, Reza Optimization of SiC particle distribution during compocasting of A356-SiCp composites using D-optimal experiment design [Volume 3, Issue 3, 2017, Pages 145-154]
  • Esmeli, Kiraz Effect of ultrasound on the dispersion of kaolinite and sepiolite suspensions with and without sodium silicate [Volume 6, Issue 1, 2020, Pages 47-54]
  • Etemad, Seyed Gholamreza Numerical simulation of nanofluids flow and heat transfer through isosceles triangular channels [Volume 4, Issue 1, 2018, Pages 29-38]
  • Etminani, Mahsa Effect of ZrSiO4 particles on the wear properties of as-cast Al matrix particulate composites fabricated via various casting routes [Volume 5, Issue 4, 2019, Pages 171-177]

F

  • Fadaeian, Manoochehr A novel application of Co3O4@SiO2 nanocomposite as an efficient and robust catalyst for the preparation of some imidazolone derivatives [Volume 4, Issue 2, 2018, Pages 111-117]
  • Farahani, Ali Composite processing and study of properties for polypropylene EPD60R/modified nanoclay Cloisite® 15A [Volume 5, Issue 2, 2019, Pages 101-108]
  • Faramarzi, Mehdi Pool boiling heat transfer coefficient of pure liquids using dimensional analysis [Volume 3, Issue 2, 2017, Pages 63-69]
  • Farzan, Elham Effect of process parameters on quality properties and drying time of hawthorn in a vibro-fluidized bed dryer [Volume 3, Issue 1, 2017, Pages 51-62]
  • Fasihi, Mohammad The influence of cellulose pulp and cellulose microfibers on the flexural performance of green-engineered cementitious composites [Volume 3, Issue 1, 2017, Pages 33-40]
  • FathinejadJirandehi, Hassan Petrochemical wastewater treatment by modified electro-Fenton process with nano iron particles [Volume 1, Issue 4, 2015, Pages 215-223]
  • FathinrjadJirandehi, Hassan Synthesis and structural properties of Polyvinylpyrrolidone based nanocomposite hydrogels for isoniazid drug delivery [Volume 1, Issue 3, 2015, Pages 183-193]
  • Fatile, Babajide Oluwagbenga Talinum triangulare leaf and Musa sapientum peel extracts as corrosion inhibitors on ZA-27 Alloy [Volume 4, Issue 1, 2018, Pages 23-28]
  • Feiz, Ali Effect of surface-functionalization of Na+-montmorillonite nanoclay using 3-aminopropyltrimethoxy silane on the mechanical properties of E-glass chopped strand mat/epoxy composites [Volume 4, Issue 2, 2018, Pages 59-65]
  • Foroutan Ghazvini, Saba FCC catalyst attrition behavior at high temperatures [Volume 5, Issue 4, 2019, Pages 135-143]

G

  • Ghadamian, Hossein Energy Modeling and Simulation including particle technologies within Single and Double Pass Solar Air Heaters [Volume 2, Issue 2, 2016, Pages 95-102]
  • Ghadami Jadval Ghadam, Aboutaleb MHD Three-Dimensional Stagnation-Point Flow and Heat Transfer of a Nanofluid over a Stretching Sheet [Volume 1, Issue 3, 2015, Pages 141-151]
  • Ghadami Jadval Ghadam, Aboutaleb Effects of Brownian motion and Thermophoresis on MHD Mixed Convection Stagnation-point Flow of a Nanofluid Toward a Stretching Vertical Sheet in Porous Medium [Volume 1, Issue 4, 2015, Pages 225-240]
  • Ghadami Jadval Ghadam, Aboutaleb Investigation of Mechanical Properties Prediction of Synthesized Nylon-66/Nano-Calcium Carbonate Composites [Volume 1, Issue 4, 2015, Pages 241-251]
  • Ghader, Sattar Interpreting the effect of operating variable, seed, and impurity on the induction time of silver nanoparticles precipitation by cluster coagulation models [Volume 4, Issue 2, 2018, Pages 81-90]
  • Ghaderi Hamidi, Ahmad Effects of Temperature and Particle Size Distribution on Barite Reduction by Carbon monoxide Gas [Volume 2, Issue 2, 2016, Pages 79-85]
  • Ghaderi Hamidi, Ahmad Effects of Fe2O3 addition and mechanical activation on thermochemical heat storage properties of the Co3O4/CoO system [Volume 4, Issue 1, 2018, Pages 13-22]
  • Gharibi, Arash Effects of local vibration on silo discharge and jamming: Employing an experimental approach [Volume 4, Issue 2, 2018, Pages 91-100]
  • Ghasemzadeh, Mohammad Ali A novel application of Co3O4@SiO2 nanocomposite as an efficient and robust catalyst for the preparation of some imidazolone derivatives [Volume 4, Issue 2, 2018, Pages 111-117]
  • Ghashang, Majid Synthesis, structural characterization and catalytic activity of TiO2/Al2O3 photo-composite [Volume 1, Issue 1, 2015, Pages 31-38]
  • Ghashang, Majid Zn2SnO4 nanostructure as an efficient catalyst for the preparation of pyrano[3,2-c]chromene and pyrano[4,3-b]pyran derivatives under ultrasonic irradiation conditions [Volume 5, Issue 1, 2019, Pages 61-69]
  • Gholami, Mostafa Investigating the effects of chemical modification of clay nanoparticles on thermal degradation and mechanical properties of TPU/nanoclay composites [Volume 1, Issue 1, 2015, Pages 1-11]
  • Gholinejad, Mehran Analyzing the effect of gradation on specific gravity and viscosity of barite powder used in excavation mud [Volume 3, Issue 3, 2017, Pages 163-167]
  • Ghotbi Ravandi, Mohamad Amin Kinetic Modeling of the High Temperature Water Gas Shift Reaction on a Novel Fe-Cr Nanocatalyst by Using Various Kinetic Mechanisms [Volume 1, Issue 1, 2015, Pages 13-19]
  • Goli Khorasgani, Ahmad Rheological properties of modified Bitumen: Comparison of waste polymers’ performance [Volume 1, Issue 4, 2015, Pages 205-213]
  • Gordi, Zinat One-Pot solvent-free synthesis of Highly Substituted Imidazoles catalyzed by zeolite [Volume 1, Issue 4, 2015, Pages 253-263]

H

  • Habibi, Biuck A green approach for the synthesis of silver nanoparticles using Lithospermum officinale root extract and evaluation of their antioxidant activity [Volume 3, Issue 4, 2017, Pages 187-195]
  • Habibi Karahrodi, Marzieh Rheological properties of modified Bitumen: Comparison of waste polymers’ performance [Volume 1, Issue 4, 2015, Pages 205-213]
  • Habibpour, Razieh Computational study of electronic, spectroscopic, and chemical properties of (CdO)n (n=1-7) nanoclusters as a transparent conducting oxide [Volume 1, Issue 4, 2015, Pages 195-204]
  • Hadadzadeh, Hassan A new precursor for preparation of magnetite (Fe3O4) nanoparticles [Volume 1, Issue 2, 2015, Pages 65-72]
  • Hallajighomi, Millad Synthesis and characterization of Polyaniline Nanocomposite by Using Several Types of Surfactants in Aqueous Media [Volume 1, Issue 3, 2015, Pages 163-170]
  • Hasanvand, Azin Theoretical thermodynamics and practical kinetics studies of oxygen desorption from Co3O4-5 wt% Al2O3 and Co3O4-5 wt% Y2O3 composites [Volume 5, Issue 1, 2019, Pages 13-21]
  • Hashemabadi, Seyed Hassan Evaluation of breakage and coalescence kernel constants for a mixer tank in the copper solvent extraction unit [Volume 6, Issue 1, 2020, Pages 13-23]
  • Hashemi, Seyed Jamal Development and Characterization of Optimized Sustained Release Voriconazole-Loaded Chitosan Nanoparticles for Ocular Delivery [(Articles in Press)]
  • Hassanpour, Mohammad Reza A Review of Manufacturing Process of Polyethylene Pipe and Connectors for Applying in High-Pressure Natural Gas Pipelines [Volume 1, Issue 3, 2015, Pages 129-140]
  • Hassanzadeh, Bahman A new method for the preparation of pure topiramate with a micron particle size [Volume 3, Issue 3, 2017, Pages 169-174]
  • Hatami, Negin Interpreting the effect of operating variable, seed, and impurity on the induction time of silver nanoparticles precipitation by cluster coagulation models [Volume 4, Issue 2, 2018, Pages 81-90]
  • Hejri, Mehri Numerical simulation of nanofluids flow and heat transfer through isosceles triangular channels [Volume 4, Issue 1, 2018, Pages 29-38]
  • Heshami, Monireh The effect of microwave radiation on grinding kinetics by selection function and breakage function - A case study of low-grade siliceous manganese ores [Volume 4, Issue 1, 2018, Pages 39-47]
  • Heydari, Elham Evaluation of the effect of granulation processing parameters on the granule properties: Lactose- Cornstarch case study [Volume 1, Issue 3, 2015, Pages 171-182]
  • Heydari Naqdali, Mokhtar Synthesis and structural properties of Polyvinylpyrrolidone based nanocomposite hydrogels for isoniazid drug delivery [Volume 1, Issue 3, 2015, Pages 183-193]
  • Hojjat, Mohammad Modeling heat transfer of non-Newtonian nanofluids using hybrid ANN-Metaheuristic optimization algorithm [Volume 3, Issue 4, 2017, Pages 233-241]
  • Hojjat, Mohammad Numerical simulation of nanofluids flow and heat transfer through isosceles triangular channels [Volume 4, Issue 1, 2018, Pages 29-38]
  • Hojjat, Mohammad Adsorption of CO2 and SO2 on multi-walled carbon nanotubes: experimental data and modeling using artificial neural network [Volume 5, Issue 1, 2019, Pages 33-45]
  • Hosseini, Mehdi Analysis of effective parameters on cadmium cementation reaction from the perspective of diffusion [Volume 6, Issue 2, 2020, Pages 81-93]

I

  • Ibrahim, Sayeda M. Gamma irradiation induced surface modification of silk fabrics for antibacterial application [Volume 3, Issue 2, 2017, Pages 71-77]
  • Imanparast, Mohammad Enhancement of E-glass fiber/epoxy composite bending performance via graphene addition [Volume 6, Issue 2, 2020, Pages 61-65]
  • Iraji, Naghmeh Adsorption of CO2 and SO2 on multi-walled carbon nanotubes: experimental data and modeling using artificial neural network [Volume 5, Issue 1, 2019, Pages 33-45]
  • Izadi Vasafi, Hossein Morphology and Mechanical Properties Investigation of Binary Polymer Blends Based on PP/SEBS and PP/PC [Volume 2, Issue 3, 2016, Pages 183-191]

J

  • Jafari, Akbar Effects of local vibration on silo discharge and jamming: Employing an experimental approach [Volume 4, Issue 2, 2018, Pages 91-100]
  • Jafarnia, Seyed Hadi FCC catalyst attrition behavior at high temperatures [Volume 5, Issue 4, 2019, Pages 135-143]
  • Jamshidi, Masoud The influence of cellulose pulp and cellulose microfibers on the flexural performance of green-engineered cementitious composites [Volume 3, Issue 1, 2017, Pages 33-40]
  • Janghorban, Kamran Modified CNTs/Nafion composite: The role of sulfonate groups on the performance of prepared proton exchange methanol fuel cell’s membrane [Volume 3, Issue 4, 2017, Pages 211-218]
  • Javidi, Mohammad Masoud Diagnosis of the disease using an ant colony gene selection method based on information gain ratio using fuzzy rough sets [Volume 3, Issue 4, 2017, Pages 175-186]
  • Joshaghani, Mohammad Ash and sulphur removal from bitumen using column flotation technique: Experimental and response surface methodology modeling [Volume 2, Issue 1, 2016, Pages 1-13]

K

  • Kaikhosravi, Mohammad A new precursor for preparation of magnetite (Fe3O4) nanoparticles [Volume 1, Issue 2, 2015, Pages 65-72]
  • Kalani Nejad, Alireza CFD simulations on natural convection heat transfer of alumina-water nanofluid with Brownian motion effect in a 3-D enclosure [Volume 2, Issue 3, 2016, Pages 163-171]
  • Karamoozian, Mohammad Crushing analysis of the industrial cage mill and the laboratory jaw crusher [Volume 3, Issue 3, 2017, Pages 155-161]
  • Karimian, Farid Development and Characterization of Optimized Sustained Release Voriconazole-Loaded Chitosan Nanoparticles for Ocular Delivery [(Articles in Press)]
  • Kazemeini, Mohammad Xenon and krypton separation in a chromatographic column packed with granulated nano NaY zeolite [Volume 1, Issue 1, 2015, Pages 49-55]
  • Kazemimoghadam, Mansoor CFD simulation of pervaporation of organic aqueous mixture through silicalite nano-pore zeolite membrane [Volume 3, Issue 3, 2017, Pages 121-132]
  • Keshavarz Alamdari, Eskandar Evaluation of breakage and coalescence kernel constants for a mixer tank in the copper solvent extraction unit [Volume 6, Issue 1, 2020, Pages 13-23]
  • Keshavarz Moraveji, Mostafa Composite processing and study of properties for polypropylene EPD60R/modified nanoclay Cloisite® 15A [Volume 5, Issue 2, 2019, Pages 101-108]
  • Keshtkar, Ali Reza Application of response surface methodology for thorium(IV) removal using Amberlite IR-120 and IRA-400: Ion exchange equilibrium and kinetics [Volume 3, Issue 2, 2017, Pages 101-112]
  • Khalafi, Reyhaneh A Review of Manufacturing Process of Polyethylene Pipe and Connectors for Applying in High-Pressure Natural Gas Pipelines [Volume 1, Issue 3, 2015, Pages 129-140]
  • Khalili Parizi, Mohammad Vahid Effects of local vibration on silo discharge and jamming: Employing an experimental approach [Volume 4, Issue 2, 2018, Pages 91-100]
  • Khandan, Maryam Iranian natural zeolite particle modification: Green synthesis, characterization, and oil spill remediation [Volume 5, Issue 2, 2019, Pages 77-90]
  • Khoramabadi, Mohammad Ali Effective Parameters on the Phase Morphology and Mechanical Properties of PP/PET/SEBS Ternary Polymer Blends [Volume 1, Issue 1, 2015, Pages 39-48]
  • Khoshrooyan, Leila Effects of catalyst particle size on methanol dehydration at different temperatures and weight hourly space velocities [Volume 2, Issue 1, 2016, Pages 41-47]
  • Khosravi, Hamed Optimization of SiC particle distribution during compocasting of A356-SiCp composites using D-optimal experiment design [Volume 3, Issue 3, 2017, Pages 145-154]
  • Khosravi, Hamed Effect of surface-functionalization of Na+-montmorillonite nanoclay using 3-aminopropyltrimethoxy silane on the mechanical properties of E-glass chopped strand mat/epoxy composites [Volume 4, Issue 2, 2018, Pages 59-65]
  • Khosravi, Hamed Effect of graphene nanoplatelets on the microstructure and mechanical behavior of erbium-modified Al-7.5Si-0.5Mg alloy [Volume 6, Issue 1, 2020, Pages 37-45]
  • Khosravi, Hamed Enhancement of E-glass fiber/epoxy composite bending performance via graphene addition [Volume 6, Issue 2, 2020, Pages 61-65]
  • Khosravi, Mohammad A Review of Manufacturing Process of Polyethylene Pipe and Connectors for Applying in High-Pressure Natural Gas Pipelines [Volume 1, Issue 3, 2015, Pages 129-140]
  • Khosravi, Morteza Predictive modeling of the length of prepared CNT by CVD through ANN-MPSO and GEP [Volume 5, Issue 4, 2019, Pages 145-159]
  • Kianvash, Abbas Investigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite [Volume 1, Issue 2, 2015, Pages 85-90]
  • Koohestanian, Esmaeil Synthesis and Statistical Analysis of Changing Size of Nano-structured PbO2 during Mechanical Milling Using Taguchi Methodology [Volume 2, Issue 1, 2016, Pages 49-54]
  • Koohestanian, Esmaeil Dynamic modelling of hardness changes of aluminium nanostructure during mechanical ball milling process [Volume 3, Issue 1, 2017, Pages 25-32]

L

  • Lahooti, Mahboobeh Synthesis of pure monoclinic zirconia nanoparticles using ultrasound cavitation technique [Volume 2, Issue 2, 2016, Pages 69-77]
  • Latifi, Seyed Mahdi Kinetic Modeling of the High Temperature Water Gas Shift Reaction on a Novel Fe-Cr Nanocatalyst by Using Various Kinetic Mechanisms [Volume 1, Issue 1, 2015, Pages 13-19]
  • Latifi, Seyed Mahdi Thin film nanocomposite forward osmosis membrane prepared by graphene oxide embedded PSf substrate [Volume 2, Issue 2, 2016, Pages 103-117]

M

  • Madadi, Vahid Effect of process parameters on quality properties and drying time of hawthorn in a vibro-fluidized bed dryer [Volume 3, Issue 1, 2017, Pages 51-62]
  • Madadi Avargani, Vahid Enhancement in energy and exergy efficiency of a solar receiver using suspended alumina nanparticles (nanofluid) as heat transfer fluid [Volume 1, Issue 2, 2015, Pages 73-83]
  • Mahdi, Miralam Numerical investigation of the effect of different parameters on emitted shockwave from bubble collapse in a nozzle [Volume 6, Issue 2, 2020, Pages 67-80]
  • Mahmoudi, Jafar Photocatalytic degradation of methyl orange using TiO2:Mg2+/zeolite composite under visible light irradiation [Volume 6, Issue 1, 2020, Pages 1-12]
  • Mahmoudi Najafi, S. Heydar Synthesis of pure monoclinic zirconia nanoparticles using ultrasound cavitation technique [Volume 2, Issue 2, 2016, Pages 69-77]
  • Malekzadeh, Asadollah Pool boiling heat transfer coefficient of pure liquids using dimensional analysis [Volume 3, Issue 2, 2017, Pages 63-69]
  • Malekzadeh, Azizm Synthesis of pure monoclinic zirconia nanoparticles using ultrasound cavitation technique [Volume 2, Issue 2, 2016, Pages 69-77]
  • Mansoori, Yagoub Fe3O4@ZrO2-SO3H Nanoparticles: A new magnetically retrievable catalyst for esterification of mono- and dicarboxylic acids [Volume 4, Issue 1, 2018, Pages 1-12]
  • Mansoori, Yagoub Fe3O4@SiO2–SO3H Nanoparticles: An efficient magnetically retrievable catalyst for esterification reactions [Volume 4, Issue 2, 2018, Pages 67-79]
  • Mansoori, Yagoub Surface decorated magnetite nanoparticles with birhodanine and MoO2Cl2(dmf)2 as a new magnetic catalyst for epoxidation of olefins [Volume 5, Issue 1, 2019, Pages 47-60]
  • Mansoury, Sedighe Diagnosis of the disease using an ant colony gene selection method based on information gain ratio using fuzzy rough sets [Volume 3, Issue 4, 2017, Pages 175-186]
  • Manteghain, Mehrdad Microwave-assisted synthesis of molybdenum oxide nanoparticles [Volume 1, Issue 2, 2015, Pages 121-127]
  • Marcous, Arin Inhibition of Staphylococcus aureus growth in fresh calf minced meat using low density Polyethylene films package promoted by titanium dioxide and zinc oxide nanoparticles [Volume 3, Issue 1, 2017, Pages 1-11]
  • Masdarolomoor, Fatemeh Effect of Sn Doping on Structural and Optical Properties of 2D α-MoO3 Nanostructures [Volume 2, Issue 2, 2016, Pages 87-93]
  • Masoudinia, Mona Application of CdO nanocatalyst in the acetylation of benzyl alcohols and degradation of sulfathiazole as a green approach [Volume 4, Issue 1, 2018, Pages 49-57]
  • Masoudzadeh, Fatemeh The influence of cellulose pulp and cellulose microfibers on the flexural performance of green-engineered cementitious composites [Volume 3, Issue 1, 2017, Pages 33-40]
  • Mehdipourghazi, Mohsen Synthesis and characterization of Polyaniline Nanocomposite by Using Several Types of Surfactants in Aqueous Media [Volume 1, Issue 3, 2015, Pages 163-170]
  • Mehdipour Ghazi, Mohsen Removal of Heavy Metal Particles by LTJ, ANA, SVR, BEC and MER zeolites particles: A Molecular Dynamics Simulation Study [Volume 1, Issue 2, 2015, Pages 99-111]
  • Meligi, Gamal Study of different methods to induce crosslinking of polyacrylamide for agriculture process [Volume 5, Issue 1, 2019, Pages 1-11]
  • Milani, Mostafa Effect of ion concentration on viscosity, electrical conductivity and deposit weight of doped nano alumina prepared by electrophoretic deposition [Volume 2, Issue 2, 2016, Pages 55-68]
  • Mirkazemi, Seyed Mohammad Effect of ion concentration on viscosity, electrical conductivity and deposit weight of doped nano alumina prepared by electrophoretic deposition [Volume 2, Issue 2, 2016, Pages 55-68]
  • Mir Mohamad Sadeghi, Gity Investigating the effects of chemical modification of clay nanoparticles on thermal degradation and mechanical properties of TPU/nanoclay composites [Volume 1, Issue 1, 2015, Pages 1-11]
  • Miroliaei, Ali Reza Numerical simulation of effect of non-spherical particle shape and bed size on hydrodynamics of packed beds [Volume 3, Issue 3, 2017, Pages 133-143]
  • Mirzaie, Sara Ultrasonic synthesis of Zn(II) methionine and ZnO nanostructures as a new precursor for ZnO nanoparticles and in-vitro study [Volume 5, Issue 2, 2019, Pages 109-116]
  • Modarres, Hamid Removal of Heavy Metal Particles by LTJ, ANA, SVR, BEC and MER zeolites particles: A Molecular Dynamics Simulation Study [Volume 1, Issue 2, 2015, Pages 99-111]
  • Moeini, Sepideh Optimization of the Ba+2 uptake in the formation process of hydrogels using central composite design: Kinetics and thermodynamic studies of malachite green removal by Ba-alginate particles [Volume 6, Issue 2, 2020, Pages 95-102]
  • Moghadam, Hamid Mono-Size Distribution Index (MSDI): A new criterion for the quantitative description of size distribution [Volume 5, Issue 2, 2019, Pages 71-76]
  • Mohammadi, Milad Removal of Heavy Metal Particles by LTJ, ANA, SVR, BEC and MER zeolites particles: A Molecular Dynamics Simulation Study [Volume 1, Issue 2, 2015, Pages 99-111]
  • Mohammadi, Toraj Investigation of mass transfer coefficients in irregular packed liquid-liquid extraction columns in the presence of various nanoparticles [Volume 3, Issue 2, 2017, Pages 113-120]
  • Mohammadi Zeydi, Masoud Green preparation of tetrahydrobenzimidazo[2,1-b]quinazolin-1(2H)-ones using γ-Fe2O3@KSF as novel and recyclable magnetic catalyst [Volume 5, Issue 4, 2019, Pages 179-186]
  • Mohammadkhani, Arezo X-Shaped Thallium oxide nanostructures as a high performance photocatalyst for degradation of Cephalexin [Volume 5, Issue 2, 2019, Pages 117-122]
  • Mohammadmahdi, Saei Numerical simulation of effect of non-spherical particle shape and bed size on hydrodynamics of packed beds [Volume 3, Issue 3, 2017, Pages 133-143]
  • Mohammadzadeh, Sahar Development and Characterization of Optimized Sustained Release Voriconazole-Loaded Chitosan Nanoparticles for Ocular Delivery [(Articles in Press)]
  • Mohanazadeh, Farajollah A new method for the preparation of pure topiramate with a micron particle size [Volume 3, Issue 3, 2017, Pages 169-174]
  • Mohebbizadeh, Mohammad Petrochemical wastewater treatment by modified electro-Fenton process with nano iron particles [Volume 1, Issue 4, 2015, Pages 215-223]
  • Moini, Omid Synthesis of Polyamide 6 by Anionic Polymerization of ε-Caprolactam in an Internal Mixer: Effect of Polymerization Reaction Time [Volume 1, Issue 2, 2015, Pages 91-98]
  • Moini Jazani, Omid Effective Parameters on the Phase Morphology and Mechanical Properties of PP/PET/SEBS Ternary Polymer Blends [Volume 1, Issue 1, 2015, Pages 39-48]
  • Moini Jazani, Omid A Review of Manufacturing Process of Polyethylene Pipe and Connectors for Applying in High-Pressure Natural Gas Pipelines [Volume 1, Issue 3, 2015, Pages 129-140]
  • Moini Jazani, Omid Rheological properties of modified Bitumen: Comparison of waste polymers’ performance [Volume 1, Issue 4, 2015, Pages 205-213]
  • Moini Jazani, Omid Thin film nanocomposite forward osmosis membrane prepared by graphene oxide embedded PSf substrate [Volume 2, Issue 2, 2016, Pages 103-117]
  • Moini Jazani, Omid Morphology and Mechanical Properties Investigation of Binary Polymer Blends Based on PP/SEBS and PP/PC [Volume 2, Issue 3, 2016, Pages 183-191]
  • Molla-Abbasi, Payam Modified CNTs/Nafion composite: The role of sulfonate groups on the performance of prepared proton exchange methanol fuel cell’s membrane [Volume 3, Issue 4, 2017, Pages 211-218]
  • Mollabagher, Hoda Development and Characterization of Optimized Sustained Release Voriconazole-Loaded Chitosan Nanoparticles for Ocular Delivery [(Articles in Press)]
  • Mollaei, Saeed A green approach for the synthesis of silver nanoparticles using Lithospermum officinale root extract and evaluation of their antioxidant activity [Volume 3, Issue 4, 2017, Pages 187-195]
  • Molyanyan, Elham Adsorption of CO2 and SO2 on multi-walled carbon nanotubes: experimental data and modeling using artificial neural network [Volume 5, Issue 1, 2019, Pages 33-45]
  • Moradi, Abed MHD Three-Dimensional Stagnation-Point Flow and Heat Transfer of a Nanofluid over a Stretching Sheet [Volume 1, Issue 3, 2015, Pages 141-151]
  • Moradi, Abed Effects of Brownian motion and Thermophoresis on MHD Mixed Convection Stagnation-point Flow of a Nanofluid Toward a Stretching Vertical Sheet in Porous Medium [Volume 1, Issue 4, 2015, Pages 225-240]
  • Morshedian, Jalil On study of X-ray absorption and properties of dispersion of W, MoS2 and B4C particles in high density polyethylene [Volume 3, Issue 1, 2017, Pages 13-24]
  • Mostafaeian, Mehdi A Review of Manufacturing Process of Polyethylene Pipe and Connectors for Applying in High-Pressure Natural Gas Pipelines [Volume 1, Issue 3, 2015, Pages 129-140]
  • Mousavi, Seyedeh Neda Optimization of an ecofriendly coating containing chitosan and gelatin as corrosion inhibitor of carbon steel grade E by Response Surface Method [Volume 5, Issue 1, 2019, Pages 23-31]
  • Mousavian, Mohammad Ali Application of response surface methodology for thorium(IV) removal using Amberlite IR-120 and IRA-400: Ion exchange equilibrium and kinetics [Volume 3, Issue 2, 2017, Pages 101-112]
  • Movahedirad, Salman Evaluation of the effect of granulation processing parameters on the granule properties: Lactose- Cornstarch case study [Volume 1, Issue 3, 2015, Pages 171-182]
  • Mozayyeni, Afsaneh Photocatalytic degradation of methyl orange using TiO2:Mg2+/zeolite composite under visible light irradiation [Volume 6, Issue 1, 2020, Pages 1-12]
  • Muhibbudin, Ismail E Assessment of Atmospheric Heavy Metals from Transport Pool within Ilorin Metropolis, Nigeria [(Articles in Press)]

N

  • Najibzade, Yasaman The computational study of the tautomerization of Dacarbazine in a biological system: The DFT approach [Volume 6, Issue 1, 2020, Pages 55-60]
  • Nasiri, Farough Surface decorated magnetite nanoparticles with birhodanine and MoO2Cl2(dmf)2 as a new magnetic catalyst for epoxidation of olefins [Volume 5, Issue 1, 2019, Pages 47-60]
  • Nekokar, Nariman Effects of Fe2O3 addition and mechanical activation on thermochemical heat storage properties of the Co3O4/CoO system [Volume 4, Issue 1, 2018, Pages 13-22]
  • Nemat-Bakhsh, Nabi Zn2SnO4 nanostructure as an efficient catalyst for the preparation of pyrano[3,2-c]chromene and pyrano[4,3-b]pyran derivatives under ultrasonic irradiation conditions [Volume 5, Issue 1, 2019, Pages 61-69]
  • Norouzbeigi, Reza Removal of crystal violet from aquatic environment by surfactant-modified dolomite [Volume 2, Issue 3, 2016, Pages 173-182]
  • Norouzbeigi, Reza A comparative study of malachite green removal from an aqueous solution using raw and chemically modified expanded perlite [Volume 3, Issue 2, 2017, Pages 79-87]
  • Nourmohammadi, Abolghasem Synthesis, structural characterization and catalytic activity of TiO2/Al2O3 photo-composite [Volume 1, Issue 1, 2015, Pages 31-38]

O

  • Ogede, Robert Oluwaseyi Talinum triangulare leaf and Musa sapientum peel extracts as corrosion inhibitors on ZA-27 Alloy [Volume 4, Issue 1, 2018, Pages 23-28]
  • Omidvar, Maryam Synthesis and Statistical Analysis of Changing Size of Nano-structured PbO2 during Mechanical Milling Using Taguchi Methodology [Volume 2, Issue 1, 2016, Pages 49-54]
  • Omidvar, Maryam Dynamic modelling of hardness changes of aluminium nanostructure during mechanical ball milling process [Volume 3, Issue 1, 2017, Pages 25-32]
  • Osouli, Karim Investigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite [Volume 1, Issue 2, 2015, Pages 85-90]
  • Ozkan, Alper Effect of ultrasound on the dispersion of kaolinite and sepiolite suspensions with and without sodium silicate [Volume 6, Issue 1, 2020, Pages 47-54]

P

  • Pakmehr, Mohammad Synthesis, structural characterization and catalytic activity of TiO2/Al2O3 photo-composite [Volume 1, Issue 1, 2015, Pages 31-38]
  • Panahi, Hanieh Modeling of splat particle splashing data during thermal spraying with the Burr distribution [Volume 3, Issue 1, 2017, Pages 41-50]
  • Panahi, Hanieh Point and interval evaluation of nanoparticles censored sample in the spray process [Volume 5, Issue 2, 2019, Pages 91-99]
  • Parvareh, Arsalan Composite processing and study of properties for polypropylene EPD60R/modified nanoclay Cloisite® 15A [Volume 5, Issue 2, 2019, Pages 101-108]
  • Parvizi, Soroush Evaluation of breakage and coalescence kernel constants for a mixer tank in the copper solvent extraction unit [Volume 6, Issue 1, 2020, Pages 13-23]
  • Pourabdoli, Mehdi Effects of Fe2O3 addition and mechanical activation on thermochemical heat storage properties of the Co3O4/CoO system [Volume 4, Issue 1, 2018, Pages 13-22]
  • Pourabdoli, Mehdi Theoretical thermodynamics and practical kinetics studies of oxygen desorption from Co3O4-5 wt% Al2O3 and Co3O4-5 wt% Y2O3 composites [Volume 5, Issue 1, 2019, Pages 13-21]
  • Pouzesh, Maryam Electrophoretic deposition and corrosion behavior study of aluminum coating on AZ91D substrate [Volume 3, Issue 4, 2017, Pages 219-232]

R

  • Rafigh Esmaeilzaei, Masoud Single-stage solution combustion preparation of ZnFe2O4-ZnS nanoparticles as dye adsorbent: effect of fuel to oxidant and Zn to Fe molar ratios [(Articles in Press)]
  • Rahbar Kelishami, Ahmad Equilibrium, kinetic, and thermodynamic applications for methylene blue removal using Buxus sempervirens leaf powder as a powerful low-cost adsorbent [Volume 5, Issue 4, 2019, Pages 161-170]
  • Rahbar-Kelishami, Ahmad Removal of crystal violet from aquatic environment by surfactant-modified dolomite [Volume 2, Issue 3, 2016, Pages 173-182]
  • Rahbar-Kelishami, Ahmad A comparative study of malachite green removal from an aqueous solution using raw and chemically modified expanded perlite [Volume 3, Issue 2, 2017, Pages 79-87]
  • Rahbar-Kelishami, Ahmad Investigation of mass transfer coefficients in irregular packed liquid-liquid extraction columns in the presence of various nanoparticles [Volume 3, Issue 2, 2017, Pages 113-120]
  • Rahimi, Amir Enhancement in energy and exergy efficiency of a solar receiver using suspended alumina nanparticles (nanofluid) as heat transfer fluid [Volume 1, Issue 2, 2015, Pages 73-83]
  • Rahimi, Esmaeil Analyzing the effect of gradation on specific gravity and viscosity of barite powder used in excavation mud [Volume 3, Issue 3, 2017, Pages 163-167]
  • Rahimi, Esmaeil The effect of microwave radiation on grinding kinetics by selection function and breakage function - A case study of low-grade siliceous manganese ores [Volume 4, Issue 1, 2018, Pages 39-47]
  • Rahimi, Mahmood Reza Effect of process parameters on quality properties and drying time of hawthorn in a vibro-fluidized bed dryer [Volume 3, Issue 1, 2017, Pages 51-62]
  • Rahmani, Mashaallah Preparation and application of meso-adsorbent NiFe2O4 for the ultrasound-enhanced removal of dye pollutant in water and wastewater: A multivariate study [Volume 6, Issue 2, 2020, Pages 103-111]
  • Rahmani, Mohammad Bagher Effect of Sn Doping on Structural and Optical Properties of 2D α-MoO3 Nanostructures [Volume 2, Issue 2, 2016, Pages 87-93]
  • Rahmaninia, Arman Surface decorated magnetite nanoparticles with birhodanine and MoO2Cl2(dmf)2 as a new magnetic catalyst for epoxidation of olefins [Volume 5, Issue 1, 2019, Pages 47-60]
  • Rahman-Setayesh, Mohammad Reza Equilibrium, kinetic, and thermodynamic applications for methylene blue removal using Buxus sempervirens leaf powder as a powerful low-cost adsorbent [Volume 5, Issue 4, 2019, Pages 161-170]
  • Ramezani Azghandi, Omid Synthesis and Statistical Analysis of Changing Size of Nano-structured PbO2 during Mechanical Milling Using Taguchi Methodology [Volume 2, Issue 1, 2016, Pages 49-54]
  • Ranjbar, Maryam Effects of catalyst particle size on methanol dehydration at different temperatures and weight hourly space velocities [Volume 2, Issue 1, 2016, Pages 41-47]
  • Ranjbar, Maryam Synthesis of pure monoclinic zirconia nanoparticles using ultrasound cavitation technique [Volume 2, Issue 2, 2016, Pages 69-77]
  • Ranjbar, Maryam Ultrasonic synthesis of Zn(II) methionine and ZnO nanostructures as a new precursor for ZnO nanoparticles and in-vitro study [Volume 5, Issue 2, 2019, Pages 109-116]
  • Rasouli, Susan Inhibition of Staphylococcus aureus growth in fresh calf minced meat using low density Polyethylene films package promoted by titanium dioxide and zinc oxide nanoparticles [Volume 3, Issue 1, 2017, Pages 1-11]
  • Rayati, Saeed X-Shaped Thallium oxide nanostructures as a high performance photocatalyst for degradation of Cephalexin [Volume 5, Issue 2, 2019, Pages 117-122]
  • Riazi, Hossein Effective Parameters on the Phase Morphology and Mechanical Properties of PP/PET/SEBS Ternary Polymer Blends [Volume 1, Issue 1, 2015, Pages 39-48]
  • Riazi, Hossein A Review of Manufacturing Process of Polyethylene Pipe and Connectors for Applying in High-Pressure Natural Gas Pipelines [Volume 1, Issue 3, 2015, Pages 129-140]
  • Riazi, Hossein Rheological properties of modified Bitumen: Comparison of waste polymers’ performance [Volume 1, Issue 4, 2015, Pages 205-213]
  • Rostami, Elahe A comparative study of malachite green removal from an aqueous solution using raw and chemically modified expanded perlite [Volume 3, Issue 2, 2017, Pages 79-87]
  • Rostamizadeh, Nader Hollow alumina nanospheres as novel catalyst for the conversion of methanol to dimethyl ether [Volume 2, Issue 1, 2016, Pages 15-22]

S

  • Sabzyan, Hasan The measurement of droplet size distribution of water-oil emulsion through NMR method [Volume 2, Issue 1, 2016, Pages 31-39]
  • Sadjadi, S. A. Hollow alumina nanospheres as novel catalyst for the conversion of methanol to dimethyl ether [Volume 2, Issue 1, 2016, Pages 15-22]
  • Sadri, Minoo Optimization of an ecofriendly coating containing chitosan and gelatin as corrosion inhibitor of carbon steel grade E by Response Surface Method [Volume 5, Issue 1, 2019, Pages 23-31]
  • Saffar Teluri, Ali Synthesis, structural characterization and catalytic activity of TiO2/Al2O3 photo-composite [Volume 1, Issue 1, 2015, Pages 31-38]
  • Saffarzadeh-Matin, Shohreh Maltodextrine nanoparticles loaded with polyphenolic extract from apple industrial waste: preparation, optimization and characterization [Volume 3, Issue 4, 2017, Pages 197-209]
  • Saffarzadeh-Matin, Shohreh Iranian natural zeolite particle modification: Green synthesis, characterization, and oil spill remediation [Volume 5, Issue 2, 2019, Pages 77-90]
  • Salehi, Mohammad Mahdi Effective Parameters on the Phase Morphology and Mechanical Properties of PP/PET/SEBS Ternary Polymer Blends [Volume 1, Issue 1, 2015, Pages 39-48]
  • Salehi, Mohammad Mahdi Synthesis of Polyamide 6 by Anionic Polymerization of ε-Caprolactam in an Internal Mixer: Effect of Polymerization Reaction Time [Volume 1, Issue 2, 2015, Pages 91-98]
  • Salehi, Mohammad Mahdi A Review of Manufacturing Process of Polyethylene Pipe and Connectors for Applying in High-Pressure Natural Gas Pipelines [Volume 1, Issue 3, 2015, Pages 129-140]
  • Samimi, Abdolreza Mono-Size Distribution Index (MSDI): A new criterion for the quantitative description of size distribution [Volume 5, Issue 2, 2019, Pages 71-76]
  • Samimi, Mohsen Optimization of the Ba+2 uptake in the formation process of hydrogels using central composite design: Kinetics and thermodynamic studies of malachite green removal by Ba-alginate particles [Volume 6, Issue 2, 2020, Pages 95-102]
  • Sarani, Behnaz Preparation and application of meso-adsorbent NiFe2O4 for the ultrasound-enhanced removal of dye pollutant in water and wastewater: A multivariate study [Volume 6, Issue 2, 2020, Pages 103-111]
  • Saravani, Hamideh Single-stage solution combustion preparation of ZnFe2O4-ZnS nanoparticles as dye adsorbent: effect of fuel to oxidant and Zn to Fe molar ratios [(Articles in Press)]
  • Seyedsadjadi, Mirabdullah Hollow alumina nanospheres as novel catalyst for the conversion of methanol to dimethyl ether [Volume 2, Issue 1, 2016, Pages 15-22]
  • Shahbazi, Majid Maltodextrine nanoparticles loaded with polyphenolic extract from apple industrial waste: preparation, optimization and characterization [Volume 3, Issue 4, 2017, Pages 197-209]
  • Shahedi, Zeynab Fe3O4@SiO2–SO3H Nanoparticles: An efficient magnetically retrievable catalyst for esterification reactions [Volume 4, Issue 2, 2018, Pages 67-79]
  • Shahsavari, Shadab Development and Characterization of Optimized Sustained Release Voriconazole-Loaded Chitosan Nanoparticles for Ocular Delivery [(Articles in Press)]
  • Shakouri, Milad A green approach for the synthesis of silver nanoparticles using Lithospermum officinale root extract and evaluation of their antioxidant activity [Volume 3, Issue 4, 2017, Pages 187-195]
  • Shalmashi, Anvar Iranian natural zeolite particle modification: Green synthesis, characterization, and oil spill remediation [Volume 5, Issue 2, 2019, Pages 77-90]
  • Shayesteh, Hadi Equilibrium, kinetic, and thermodynamic applications for methylene blue removal using Buxus sempervirens leaf powder as a powerful low-cost adsorbent [Volume 5, Issue 4, 2019, Pages 161-170]
  • Shayesteh, Keivan Analysis of effective parameters on cadmium cementation reaction from the perspective of diffusion [Volume 6, Issue 2, 2020, Pages 81-93]
  • Sheikhhosseini, Enayatollah The computational study of the tautomerization of Dacarbazine in a biological system: The DFT approach [Volume 6, Issue 1, 2020, Pages 55-60]
  • Shiroud Ghorbani, Saghi Green preparation of tetrahydrobenzimidazo[2,1-b]quinazolin-1(2H)-ones using γ-Fe2O3@KSF as novel and recyclable magnetic catalyst [Volume 5, Issue 4, 2019, Pages 179-186]
  • Shokrollahzadeh, Soheila Improvement in photocatalysts and photocatalytic reactors for water and wastewater treatment: A review [Volume 2, Issue 3, 2016, Pages 119-140]
  • Shokrollahzadeh, Soheila Thin film nanocomposite forward osmosis membrane prepared by graphene oxide embedded PSf substrate [Volume 2, Issue 2, 2016, Pages 103-117]
  • Sobati, Mohammad Amin An experimental investigation on drying kinetics of calcium carbonate [Volume 1, Issue 3, 2015, Pages 153-162]
  • Sobati, Mohammad Amin Evaluation of the effect of granulation processing parameters on the granule properties: Lactose- Cornstarch case study [Volume 1, Issue 3, 2015, Pages 171-182]
  • Sobati, Mohammad Amin Drying of calcium carbonate in a batch spouted bed dryer: optimization and kinetics modeling [Volume 3, Issue 2, 2017, Pages 89-99]
  • Soeezi, Amirhossein Analyzing the effect of gradation on specific gravity and viscosity of barite powder used in excavation mud [Volume 3, Issue 3, 2017, Pages 163-167]
  • Solaimany Nazar, Ali Reza The measurement of droplet size distribution of water-oil emulsion through NMR method [Volume 2, Issue 1, 2016, Pages 31-39]
  • Soltanokottabi, Fariba Effective Parameters on the Phase Morphology and Mechanical Properties of PP/PET/SEBS Ternary Polymer Blends [Volume 1, Issue 1, 2015, Pages 39-48]
  • Soudbar, Davood Composite processing and study of properties for polypropylene EPD60R/modified nanoclay Cloisite® 15A [Volume 5, Issue 2, 2019, Pages 101-108]

T

  • Tajik, Saharnaz Thin film nanocomposite forward osmosis membrane prepared by graphene oxide embedded PSf substrate [Volume 2, Issue 2, 2016, Pages 103-117]
  • Talaei, Alireza Morphology and Mechanical Properties Investigation of Binary Polymer Blends Based on PP/SEBS and PP/PC [Volume 2, Issue 3, 2016, Pages 183-191]
  • Talaie, Mohammad Reza Adsorption of CO2 and SO2 on multi-walled carbon nanotubes: experimental data and modeling using artificial neural network [Volume 5, Issue 1, 2019, Pages 33-45]
  • Tamim, Hossein CFD simulations on natural convection heat transfer of alumina-water nanofluid with Brownian motion effect in a 3-D enclosure [Volume 2, Issue 3, 2016, Pages 163-171]
  • Tari, Faeze Microwave-assisted synthesis of molybdenum oxide nanoparticles [Volume 1, Issue 2, 2015, Pages 121-127]
  • Tavakoli Gheinani, Touraj Enhancement in energy and exergy efficiency of a solar receiver using suspended alumina nanparticles (nanofluid) as heat transfer fluid [Volume 1, Issue 2, 2015, Pages 73-83]
  • Tayeb Oskoie, Parya Fe3O4@ZrO2-SO3H Nanoparticles: A new magnetically retrievable catalyst for esterification of mono- and dicarboxylic acids [Volume 4, Issue 1, 2018, Pages 1-12]
  • Tohidlou, Esmaeil Effect of surface-functionalization of Na+-montmorillonite nanoclay using 3-aminopropyltrimethoxy silane on the mechanical properties of E-glass chopped strand mat/epoxy composites [Volume 4, Issue 2, 2018, Pages 59-65]
  • Tohidlou, Esmaeil Effect of ZrSiO4 particles on the wear properties of as-cast Al matrix particulate composites fabricated via various casting routes [Volume 5, Issue 4, 2019, Pages 171-177]
  • Tohidlou, Esmaeil Effect of graphene nanoplatelets on the microstructure and mechanical behavior of erbium-modified Al-7.5Si-0.5Mg alloy [Volume 6, Issue 1, 2020, Pages 37-45]
  • Toraman, Oner Yusuf Grinding-aid effect on the colour properties (Ry, whiteness and yellowness) of calcite in stirred media milling [Volume 2, Issue 1, 2016, Pages 23-29]

V

  • Vahdat Azad, Abazar Effect of Radiation Heat Loss and Ventilation on Dust Explosions in Spherical Vessels [Volume 1, Issue 1, 2015, Pages 57-64]
  • Vahdat Azad, Abazar Effect of the temperature difference between gas and organic dust on propagating spherical flames [Volume 2, Issue 3, 2016, Pages 151-161]
  • Vahidfard, Vahid Analysis of effective parameters on cadmium cementation reaction from the perspective of diffusion [Volume 6, Issue 2, 2020, Pages 81-93]
  • Vakilpour, Saeed Effects of Temperature and Particle Size Distribution on Barite Reduction by Carbon monoxide Gas [Volume 2, Issue 2, 2016, Pages 79-85]
  • Varaminian, Farshad Synthesis and characterization of Polyaniline Nanocomposite by Using Several Types of Surfactants in Aqueous Media [Volume 1, Issue 3, 2015, Pages 163-170]
  • Vasseghian, Yasser Ash and sulphur removal from bitumen using column flotation technique: Experimental and response surface methodology modeling [Volume 2, Issue 1, 2016, Pages 1-13]
  • Vazan, Mohammad One-Pot solvent-free synthesis of Highly Substituted Imidazoles catalyzed by zeolite [Volume 1, Issue 4, 2015, Pages 253-263]
  • Vaziri, Raheleh Computational study of electronic, spectroscopic, and chemical properties of (CdO)n (n=1-7) nanoclusters as a transparent conducting oxide [Volume 1, Issue 4, 2015, Pages 195-204]
  • Vesal, Ali Investigation of mass transfer coefficients in irregular packed liquid-liquid extraction columns in the presence of various nanoparticles [Volume 3, Issue 2, 2017, Pages 113-120]
  • Veys Karami, Reza Morphology and Mechanical Properties Investigation of Binary Polymer Blends Based on PP/SEBS and PP/PC [Volume 2, Issue 3, 2016, Pages 183-191]

Y

  • Yousefi, Mostafa Synthesis of pure monoclinic zirconia nanoparticles using ultrasound cavitation technique [Volume 2, Issue 2, 2016, Pages 69-77]

Z

  • Zahedi, Mir Mahdi Enhanced photocatalytic degradation of 2,4-dichlorophenol in water solution using Sr-doped ZnAl2O4 nanoparticles [Volume 4, Issue 2, 2018, Pages 101-109]
  • Zahedipoor, Ahmadreza Pool boiling heat transfer coefficient of pure liquids using dimensional analysis [Volume 3, Issue 2, 2017, Pages 63-69]
  • Zahraee, Seyed Mohammad Effect of ion concentration on viscosity, electrical conductivity and deposit weight of doped nano alumina prepared by electrophoretic deposition [Volume 2, Issue 2, 2016, Pages 55-68]
  • Zahraee, Seyed Mohammad Experimental Investigation of Metal Powder Compaction without Using Lubricant [Volume 2, Issue 3, 2016, Pages 141-149]
  • Zakeri, Mozhgan Mono-Size Distribution Index (MSDI): A new criterion for the quantitative description of size distribution [Volume 5, Issue 2, 2019, Pages 71-76]
  • Zamani souderjani, Ehsan Application of response surface methodology for thorium(IV) removal using Amberlite IR-120 and IRA-400: Ion exchange equilibrium and kinetics [Volume 3, Issue 2, 2017, Pages 101-112]
  • Zeraati, Malihe Predictive modeling of the length of prepared CNT by CVD through ANN-MPSO and GEP [Volume 5, Issue 4, 2019, Pages 145-159]
  • Ziyaadini, Morteza Enhanced photocatalytic degradation of 2,4-dichlorophenol in water solution using Sr-doped ZnAl2O4 nanoparticles [Volume 4, Issue 2, 2018, Pages 101-109]
  • Zolfaghari, Reza Crushing analysis of the industrial cage mill and the laboratory jaw crusher [Volume 3, Issue 3, 2017, Pages 155-161]