Journal of Particle Science and Technology

Keyword Index

A

A356-SiC_p composite Optimization of SiC particle distribution during compocasting of A356-SiC_p composites using D-optimal experiment design [Volume 3, Issue 3, 2017, Pages 145-154]
Acamprosate calcium A new method for the preparation of pure acamprosate calcium with a micron particle size [Volume 8, Issue 1, 2022, Pages 17-23]
Acetylation Application of CdO nanocatalyst in the acetylation of benzyl alcohols and degradation of sulfathiazole as a green approach [Volume 4, Issue 1, 2018, Pages 49-57]
Activation energy Kinetic Modeling of the High Temperature Water Gas Shift Reaction on a Novel Fe-Cr Nanocatalyst by Using Various Kinetic Mechanisms [Volume 1, Issue 1, 2015, Pages 13-19]
Activation energy Effects of Temperature and Particle Size Distribution on Barite Reduction by Carbon monoxide Gas [Volume 2, Issue 2, 2016, Pages 79-85]
Activation energy Theoretical thermodynamics and practical kinetics studies of oxygen desorption from Co₃O₄-5 wt% Al₂O₃ and Co₃O₄-5 wt% Y₂O₃ composites [Volume 5, Issue 1, 2019, Pages 13-21]
Additives Investigation of Mechanical Properties Prediction of Synthesized Nylon-66/Nano-Calcium Carbonate Composites [Volume 1, Issue 4, 2015, Pages 241-251]
Adsorbent Investigation of phosphate adsorption from aqueous media using synthetic mordenite and modified natural clinoptilolite zeolite adsorbents: characteristics, kinetics, and isotherms [Volume 7, Issue 2, 2021, Pages 119-130]
Adsorption Removal of crystal violet from aquatic environment by surfactant-modified dolomite [Volume 2, Issue 3, 2016, Pages 173-182]
Adsorption A comparative study of malachite green removal from an aqueous solution using raw and chemically modified expanded perlite [Volume 3, Issue 2, 2017, Pages 79-87]
Adsorption Adsorption of CO₂ and SO₂ on multi-walled carbon nanotubes: experimental data and modeling using artificial neural network [Volume 5, Issue 1, 2019, Pages 33-45]
Adsorption Iranian natural zeolite particle modification: Green synthesis, characterization, and oil spill remediation [Volume 5, Issue 2, 2019, Pages 77-90]
Adsorption Modified bentonite as adsorbent material for the removal of the basic dye methylene blue from aqueous solutions [Volume 7, Issue 1, 2021, Pages 23-31]
Al2O3 Synthesis, structural characterization and catalytic activity of TiO2/Al2O3 photo-composite [Volume 1, Issue 1, 2015, Pages 31-38]
Al-based composite Effect of ZrSiO₄ particles on the wear properties of as-cast Al matrix particulate composites fabricated via various casting routes [Volume 5, Issue 4, 2019, Pages 171-177]
Al-Si-Mg alloy Effect of graphene nanoplatelets on the microstructure and mechanical behavior of erbium-modified Al-7.5Si-0.5Mg alloy [Volume 6, Issue 1, 2020, Pages 37-45]
Alumina A spray pyrolysis method for fabrication of superhydrophobic copper substrate based on modified-alumina powder by fatty acid [Volume 6, Issue 1, 2020, Pages 25-36]
Alumina nanoparticles Enhancement in energy and exergy efficiency of a solar receiver using suspended alumina nanparticles (nanofluid) as heat transfer fluid [Volume 1, Issue 2, 2015, Pages 73-83]
Aluminium powder Dynamic modelling of hardness changes of aluminium nanostructure during mechanical ball milling process [Volume 3, Issue 1, 2017, Pages 25-32]
Aluminum coating Electrophoretic deposition and corrosion behavior study of aluminum coating on AZ91D substrate [Volume 3, Issue 4, 2017, Pages 219-232]
Aluminum-matrix composite Fabrication method, microstructural characteristics, and hardness behavior of an interpenetrating phases hybrid aluminum/alumina-nanodiamond composite [Volume 9, Issue 2, 2023, Pages 63-71]
Amino acid nanostructures Ultrasonic synthesis of Zn(II) methionine and ZnO nanostructures as a new precursor for ZnO nanoparticles and in-vitro study [Volume 5, Issue 2, 2019, Pages 109-116]
Analytical Method Effect of the temperature difference between gas and organic dust on propagating spherical flames [Volume 2, Issue 3, 2016, Pages 151-161]
Anionic Polymerization Synthesis of Polyamide 6 by Anionic Polymerization of ε-Caprolactam in an Internal Mixer: Effect of Polymerization Reaction Time [Volume 1, Issue 2, 2015, Pages 91-98]
ANOVA Effect of ion concentration on viscosity, electrical conductivity and deposit weight of doped nano alumina prepared by electrophoretic deposition [Volume 2, Issue 2, 2016, Pages 55-68]
Antibacterial activity Gamma irradiation induced surface modification of silk fabrics for antibacterial application [Volume 3, Issue 2, 2017, Pages 71-77]
Antibacterial agents Inhibition of Staphylococcus aureus growth in fresh calf minced meat using low density Polyethylene films package promoted by titanium dioxide and zinc oxide nanoparticles [Volume 3, Issue 1, 2017, Pages 1-11]
Anti-cancer The computational study of the tautomerization of Dacarbazine in a biological system: The DFT approach [Volume 6, Issue 1, 2020, Pages 55-60]
Anti-cancer Theoretical study of the tautomerization of Carmustine in a biological media as an anti-cancer drug [Volume 7, Issue 1, 2021, Pages 51-57]
Antioxidant A green approach for the synthesis of silver nanoparticles using Lithospermum officinale root extract and evaluation of their antioxidant activity [Volume 3, Issue 4, 2017, Pages 187-195]
Apple pomace polyphenolic extract Maltodextrine nanoparticles loaded with polyphenolic extract from apple industrial waste: preparation, optimization and characterization [Volume 3, Issue 4, 2017, Pages 197-209]
Artificial neural network Modeling heat transfer of non-Newtonian nanofluids using hybrid ANN-Metaheuristic optimization algorithm [Volume 3, Issue 4, 2017, Pages 233-241]
Artificial neural network Adsorption of CO₂ and SO₂ on multi-walled carbon nanotubes: experimental data and modeling using artificial neural network [Volume 5, Issue 1, 2019, Pages 33-45]
Ash removal Ash and sulphur removal from bitumen using column flotation technique: Experimental and response surface methodology modeling [Volume 2, Issue 1, 2016, Pages 1-13]
Attrition FCC catalyst attrition behavior at high temperatures [Volume 5, Issue 4, 2019, Pages 135-143]
AZ91D magnesium alloy Electrophoretic deposition and corrosion behavior study of aluminum coating on AZ91D substrate [Volume 3, Issue 4, 2017, Pages 219-232]

B

Ball milling Dynamic modelling of hardness changes of aluminium nanostructure during mechanical ball milling process [Volume 3, Issue 1, 2017, Pages 25-32]
Barbituric acid Synthesis and characterization of the aminated nano-zeolite: A green heterogeneous nanocatalyst for the synthesis of valuable organic compounds [Volume 8, Issue 1, 2022, Pages 53-62]
Barite Effects of Temperature and Particle Size Distribution on Barite Reduction by Carbon monoxide Gas [Volume 2, Issue 2, 2016, Pages 79-85]
Barite Analyzing the effect of gradation on specific gravity and viscosity of barite powder used in excavation mud [Volume 3, Issue 3, 2017, Pages 163-167]
Barite ore Investigating the effects of elutriation in upgrading middle-grade barite ore from Obubra, Cross River State, Nigeria for drilling mud applications [Volume 10, Issue 1, 2024, Pages 1-8]
Barite ore Barite processing for industrial use – A bibliographic survey [Volume 10, Issue 1, 2024, Pages 19-32]
Barium alginate Optimization of the Ba⁺² uptake in the formation process of hydrogels using central composite design: Kinetics and thermodynamic studies of malachite green removal by Ba-alginate particles [Volume 6, Issue 2, 2020, Pages 95-102]
Bending performance Enhancement of E-glass fiber/epoxy composite bending performance via graphene addition [Volume 6, Issue 2, 2020, Pages 61-65]
Birhodanine Surface decorated magnetite nanoparticles with birhodanine and MoO₂Cl₂(dmf)₂ as a new magnetic catalyst for epoxidation of olefins [Volume 5, Issue 1, 2019, Pages 47-60]
Bitumen Rheological properties of modified Bitumen: Comparison of waste polymers’ performance [Volume 1, Issue 4, 2015, Pages 205-213]
Bitumen Ash and sulphur removal from bitumen using column flotation technique: Experimental and response surface methodology modeling [Volume 2, Issue 1, 2016, Pages 1-13]
Blockage Effects of local vibration on silo discharge and jamming: Employing an experimental approach [Volume 4, Issue 2, 2018, Pages 91-100]
Bound state Theoretical study of quantum and thermal properties of particles’ bound state in quantum disks [Volume 9, Issue 1, 2023, Pages 19-27]
Boxwood Equilibrium, kinetic, and thermodynamic applications for methylene blue removal using Buxus sempervirens leaf powder as a powerful low-cost adsorbent [Volume 5, Issue 4, 2019, Pages 161-170]
Brownian motion Effects of Brownian motion and Thermophoresis on MHD Mixed Convection Stagnation-point Flow of a Nanofluid Toward a Stretching Vertical Sheet in Porous Medium [Volume 1, Issue 4, 2015, Pages 225-240]
Brownian motion CFD simulations on natural convection heat transfer of alumina-water nanofluid with Brownian motion effect in a 3-D enclosure [Volume 2, Issue 3, 2016, Pages 163-171]
Burr Type XII Modeling of splat particle splashing data during thermal spraying with the Burr distribution [Volume 3, Issue 1, 2017, Pages 41-50]

C

Cadmium Oxide Computational study of electronic, spectroscopic, and chemical properties of (CdO)n (n=1-7) nanoclusters as a transparent conducting oxide [Volume 1, Issue 4, 2015, Pages 195-204]
Cage mill Crushing analysis of the industrial cage mill and the laboratory jaw crusher [Volume 3, Issue 3, 2017, Pages 155-161]
Calcium carbonate An experimental investigation on drying kinetics of calcium carbonate [Volume 1, Issue 3, 2015, Pages 153-162]
Carbon Dioxide Adsorption of CO₂ and SO₂ on multi-walled carbon nanotubes: experimental data and modeling using artificial neural network [Volume 5, Issue 1, 2019, Pages 33-45]
Carbon monoxide Effects of Temperature and Particle Size Distribution on Barite Reduction by Carbon monoxide Gas [Volume 2, Issue 2, 2016, Pages 79-85]
Catalyst A novel application of Co₃O₄@SiO₂ nanocomposite as an efficient and robust catalyst for the preparation of some imidazolone derivatives [Volume 4, Issue 2, 2018, Pages 111-117]
Catalyst Particle Size Effects of catalyst particle size on methanol dehydration at different temperatures and weight hourly space velocities [Volume 2, Issue 1, 2016, Pages 41-47]
Catalytic activity Fe₃O₄@SiO₂/AEPTMS/Fe(OTf)₃: An efficient superparamagnetic nanocatalyst for the protecting of alcohols [Volume 9, Issue 1, 2023, Pages 1-9]
Catalytic Combustion Geometric parameters effect on the reaction zone of premixed CH₄ catalytic combustion in a fibrous porous medium [Volume 8, Issue 1, 2022, Pages 1-7]
Catalytic Radiant Heater Experimental evaluation of a dual-function solution for reducing flue gas pollutants using low-temperature counter-diffusive combustion of methane with Au_0.06-Pd_0.06/Al₂O₃ Catalyst [Volume 10, Issue 1, 2024, Pages 41-49]
CaTiO₃ Nano-powders Synthesis and characterization of Ni-doped CaTiO₃ nano-powders and their potential for the removal of Cd from wastewaters [Volume 8, Issue 1, 2022, Pages 9-16]
Cavitation Numerical investigation of the effect of different parameters on emitted shockwave from bubble collapse in a nozzle [Volume 6, Issue 2, 2020, Pages 67-80]
CCD Optimization of the Ba⁺² uptake in the formation process of hydrogels using central composite design: Kinetics and thermodynamic studies of malachite green removal by Ba-alginate particles [Volume 6, Issue 2, 2020, Pages 95-102]
CdO Application of CdO nanocatalyst in the acetylation of benzyl alcohols and degradation of sulfathiazole as a green approach [Volume 4, Issue 1, 2018, Pages 49-57]
Cd²⁺ Removal Synthesis and characterization of Ni-doped CaTiO₃ nano-powders and their potential for the removal of Cd from wastewaters [Volume 8, Issue 1, 2022, Pages 9-16]
Cellulose The influence of cellulose pulp and cellulose microfibers on the flexural performance of green-engineered cementitious composites [Volume 3, Issue 1, 2017, Pages 33-40]
Cement The influence of cellulose pulp and cellulose microfibers on the flexural performance of green-engineered cementitious composites [Volume 3, Issue 1, 2017, Pages 33-40]
Censored Data Modeling of splat particle splashing data during thermal spraying with the Burr distribution [Volume 3, Issue 1, 2017, Pages 41-50]
Censored Data Point and interval evaluation of nanoparticles censored sample in the spray process [Volume 5, Issue 2, 2019, Pages 91-99]
Central Composite Design Application of response surface methodology for thorium(IV) removal using Amberlite IR-120 and IRA-400: Ion exchange equilibrium and kinetics [Volume 3, Issue 2, 2017, Pages 101-112]
Central Composite Design Analysis of effective parameters on cadmium cementation reaction from the perspective of diffusion [Volume 6, Issue 2, 2020, Pages 81-93]
Cephalexin X-Shaped Thallium oxide nanostructures as a high performance photocatalyst for degradation of Cephalexin [Volume 5, Issue 2, 2019, Pages 117-122]
CFD simulation CFD simulations on natural convection heat transfer of alumina-water nanofluid with Brownian motion effect in a 3-D enclosure [Volume 2, Issue 3, 2016, Pages 163-171]
CFD simulation CFD simulation of pervaporation of organic aqueous mixture through silicalite nano-pore zeolite membrane [Volume 3, Issue 3, 2017, Pages 121-132]
Chemical structure Investigating the effects of chemical modification of clay nanoparticles on thermal degradation and mechanical properties of TPU/nanoclay composites [Volume 1, Issue 1, 2015, Pages 1-11]
Chemical structure Synthesis and characterization of Polyaniline Nanocomposite by Using Several Types of Surfactants in Aqueous Media [Volume 1, Issue 3, 2015, Pages 163-170]
Chitosan Optimization of an ecofriendly coating containing chitosan and gelatin as corrosion inhibitor of carbon steel grade E by Response Surface Method [Volume 5, Issue 1, 2019, Pages 23-31]
Classical and Bayesian prediction, Generalized inverted exponential model Point and interval evaluation of nanoparticles censored sample in the spray process [Volume 5, Issue 2, 2019, Pages 91-99]
Clinoptilolite Synthesis and characterization of the aminated nano-zeolite: A green heterogeneous nanocatalyst for the synthesis of valuable organic compounds [Volume 8, Issue 1, 2022, Pages 53-62]
Cluster coagulation model Interpreting the effect of operating variable, seed, and impurity on the induction time of silver nanoparticles precipitation by cluster coagulation models [Volume 4, Issue 2, 2018, Pages 81-90]
Clusters The effect of nanoclay on the creation of clusters of polyamide 6 microfibrils [Volume 8, Issue 1, 2022, Pages 25-37]
CO2 reduction Preparation of Gd2O3 nanoparticles from a new precursor and their catalytic activity for electrochemical reduction of CO2 to CO [Volume 1, Issue 1, 2015, Pages 21-30]
Coal Dust Effect of Radiation Heat Loss and Ventilation on Dust Explosions in Spherical Vessels [Volume 1, Issue 1, 2015, Pages 57-64]
Coal Dust Effect of the temperature difference between gas and organic dust on propagating spherical flames [Volume 2, Issue 3, 2016, Pages 151-161]
Coated carbon fiber Investigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite [Volume 1, Issue 2, 2015, Pages 85-90]
Coating morphology Electrophoretic deposition and corrosion behavior study of aluminum coating on AZ91D substrate [Volume 3, Issue 4, 2017, Pages 219-232]
Cobalt oxide Effects of Fe₂O₃ addition and mechanical activation on thermochemical heat storage properties of the Co₃O₄/CoO system [Volume 4, Issue 1, 2018, Pages 13-22]
Cobalt oxide Theoretical thermodynamics and practical kinetics studies of oxygen desorption from Co₃O₄-5 wt% Al₂O₃ and Co₃O₄-5 wt% Y₂O₃ composites [Volume 5, Issue 1, 2019, Pages 13-21]
COD Petrochemical wastewater treatment by modified electro-Fenton process with nano iron particles [Volume 1, Issue 4, 2015, Pages 215-223]
Collection efficiency Cyclone separator theories to predict performance and flow characteristics [Volume 7, Issue 2, 2021, Pages 83-98]
Column Flotation process Ash and sulphur removal from bitumen using column flotation technique: Experimental and response surface methodology modeling [Volume 2, Issue 1, 2016, Pages 1-13]
Combined MD/RO systems Fabrication and optimization of superhydrophobic ZnO-SA/PVC/PVP nanocomposite membrane distillation for highly saline RO brine recovery [Volume 9, Issue 2, 2023, Pages 103-113]
Combustion Effect of the temperature difference between gas and organic dust on propagating spherical flames [Volume 2, Issue 3, 2016, Pages 151-161]
Combustion synthesis Single-stage solution combustion preparation of ZnFe₂O₄-ZnS nanoparticles as dye adsorbent: Effect of fuel to oxidant and Zn to Fe molar ratios [Volume 6, Issue 2, 2020, Pages 113-122]
Comminution Crushing analysis of the industrial cage mill and the laboratory jaw crusher [Volume 3, Issue 3, 2017, Pages 155-161]
Compocasting Optimization of SiC particle distribution during compocasting of A356-SiC_p composites using D-optimal experiment design [Volume 3, Issue 3, 2017, Pages 145-154]
Composites Investigation of Mechanical Properties Prediction of Synthesized Nylon-66/Nano-Calcium Carbonate Composites [Volume 1, Issue 4, 2015, Pages 241-251]
Conductive polymer Synthesis and characterization of Polyaniline Nanocomposite by Using Several Types of Surfactants in Aqueous Media [Volume 1, Issue 3, 2015, Pages 163-170]
Congo red Application of Fe₃O₄@THAM-CH₂CH₂Cl magnetic nanoparticle as a new adsorbent in ultrasonically assisted removal of Congo red from aqueous solutions [Volume 8, Issue 2, 2022, Pages 103-114]
Connectivity Mechanical behavior of magnesium-steel particles composites with interpenetrating phases [Volume 9, Issue 1, 2023, Pages 29-34]
Controlled release Synthesis and structural properties of Polyvinylpyrrolidone based nanocomposite hydrogels for isoniazid drug delivery [Volume 1, Issue 3, 2015, Pages 183-193]
Copper Evaluation of breakage and coalescence kernel constants for a mixer tank in the copper solvent extraction unit [Volume 6, Issue 1, 2020, Pages 13-23]
Copper A spray pyrolysis method for fabrication of superhydrophobic copper substrate based on modified-alumina powder by fatty acid [Volume 6, Issue 1, 2020, Pages 25-36]
Co-precipitation method X-Shaped Thallium oxide nanostructures as a high performance photocatalyst for degradation of Cephalexin [Volume 5, Issue 2, 2019, Pages 117-122]
Cordierite Preparation of pure cordierite through heat treatment of combustion synthesized magnesium aluminate spinel and silica nanoparticles [Volume 9, Issue 1, 2023, Pages 11-18]
Core-shell magnetic solid acid Fe₃O₄@SiO₂–SO₃H Nanoparticles: An efficient magnetically retrievable catalyst for esterification reactions [Volume 4, Issue 2, 2018, Pages 67-79]
Cornea Development and characterization of optimized sustained release voriconazole-loaded chitosan nanoparticles for ocular delivery [Volume 7, Issue 1, 2021, Pages 1-10]
Corrosion Talinum triangulare leaf and Musa sapientum peel extracts as corrosion inhibitors on ZA-27 Alloy [Volume 4, Issue 1, 2018, Pages 23-28]
Co₃O₄@SiO₂ A novel application of Co₃O₄@SiO₂ nanocomposite as an efficient and robust catalyst for the preparation of some imidazolone derivatives [Volume 4, Issue 2, 2018, Pages 111-117]
Coupled states Exciton properties in 2D-Xenes nanomaterials within quantum field approaches [Volume 7, Issue 2, 2021, Pages 59-71]
Crystal structure Effect of Sn Doping on Structural and Optical Properties of 2D α-MoO3 Nanostructures [Volume 2, Issue 2, 2016, Pages 87-93]
Crystal violet (CV+) Removal of crystal violet from aquatic environment by surfactant-modified dolomite [Volume 2, Issue 3, 2016, Pages 173-182]
Cyclic voltammetry Preparation of Gd2O3 nanoparticles from a new precursor and their catalytic activity for electrochemical reduction of CO2 to CO [Volume 1, Issue 1, 2015, Pages 21-30]
Cyclone separator theories Cyclone separator theories to predict performance and flow characteristics [Volume 7, Issue 2, 2021, Pages 83-98]

D

Dacarbazine The computational study of the tautomerization of Dacarbazine in a biological system: The DFT approach [Volume 6, Issue 1, 2020, Pages 55-60]
Dechlorination A sol-gel based method for preparation of Ni/La-Al2O3 as a new catalyst for dechlorination of monochlorobenzene [Volume 1, Issue 2, 2015, Pages 113-120]
Degradation Application of CdO nanocatalyst in the acetylation of benzyl alcohols and degradation of sulfathiazole as a green approach [Volume 4, Issue 1, 2018, Pages 49-57]
Design of experiment Synthesis and Statistical Analysis of Changing Size of Nano-structured PbO2 during Mechanical Milling Using Taguchi Methodology [Volume 2, Issue 1, 2016, Pages 49-54]
Desliming and flotation Barite processing for industrial use – A bibliographic survey [Volume 10, Issue 1, 2024, Pages 19-32]
DFT Computational study of electronic, spectroscopic, and chemical properties of (CdO)n (n=1-7) nanoclusters as a transparent conducting oxide [Volume 1, Issue 4, 2015, Pages 195-204]
DFT The computational study of the tautomerization of Dacarbazine in a biological system: The DFT approach [Volume 6, Issue 1, 2020, Pages 55-60]
DFT Theoretical study of the tautomerization of Carmustine in a biological media as an anti-cancer drug [Volume 7, Issue 1, 2021, Pages 51-57]
Dielectrophoresis The effects of suspending medium on dielectrophoretic systems for separating and sorting carbon nanotubes [Volume 5, Issue 4, 2019, Pages 123-134]
Die Wall Lubrication Experimental Investigation of Metal Powder Compaction without Using Lubricant [Volume 2, Issue 3, 2016, Pages 141-149]
Dilatational interfacial viscosity A modified Marmottant model to study the effects of a shell rupture on the subharmonic threshold of encapsulated microbubbles [Volume 7, Issue 1, 2021, Pages 41-50]
Discharge Effects of local vibration on silo discharge and jamming: Employing an experimental approach [Volume 4, Issue 2, 2018, Pages 91-100]
Distortion potential Theoretical study of quantum and thermal properties of particles’ bound state in quantum disks [Volume 9, Issue 1, 2023, Pages 19-27]
Distribution Effect of ZrSiO₄ particles on the wear properties of as-cast Al matrix particulate composites fabricated via various casting routes [Volume 5, Issue 4, 2019, Pages 171-177]
DME Effects of catalyst particle size on methanol dehydration at different temperatures and weight hourly space velocities [Volume 2, Issue 1, 2016, Pages 41-47]
D-optimal design of experiment Optimization of SiC particle distribution during compocasting of A356-SiC_p composites using D-optimal experiment design [Volume 3, Issue 3, 2017, Pages 145-154]
DOS Computational study of electronic, spectroscopic, and chemical properties of (CdO)n (n=1-7) nanoclusters as a transparent conducting oxide [Volume 1, Issue 4, 2015, Pages 195-204]
Drying effective efficiency Drying of calcium carbonate in a batch spouted bed dryer: optimization and kinetics modeling [Volume 3, Issue 2, 2017, Pages 89-99]
Drying kinetics Drying of calcium carbonate in a batch spouted bed dryer: optimization and kinetics modeling [Volume 3, Issue 2, 2017, Pages 89-99]
Drying rate An experimental investigation on drying kinetics of calcium carbonate [Volume 1, Issue 3, 2015, Pages 153-162]
Drying rate Effect of process parameters on quality properties and drying time of hawthorn in a vibro-fluidized bed dryer [Volume 3, Issue 1, 2017, Pages 51-62]
Dust Explosion Effect of Radiation Heat Loss and Ventilation on Dust Explosions in Spherical Vessels [Volume 1, Issue 1, 2015, Pages 57-64]
Dusty Flame Effect of the temperature difference between gas and organic dust on propagating spherical flames [Volume 2, Issue 3, 2016, Pages 151-161]
Dye Equilibrium, kinetic, and thermodynamic applications for methylene blue removal using Buxus sempervirens leaf powder as a powerful low-cost adsorbent [Volume 5, Issue 4, 2019, Pages 161-170]

E

EDXRF Assessment of an atmospheric heavy metal from a transport pool within the Ilorin Metropolis, Nigeria [Volume 7, Issue 1, 2021, Pages 11-21]
Effective moisture diffusivity An experimental investigation on drying kinetics of calcium carbonate [Volume 1, Issue 3, 2015, Pages 153-162]
Efficiency Talinum triangulare leaf and Musa sapientum peel extracts as corrosion inhibitors on ZA-27 Alloy [Volume 4, Issue 1, 2018, Pages 23-28]
Elastic Die Deformation Experimental Investigation of Metal Powder Compaction without Using Lubricant [Volume 2, Issue 3, 2016, Pages 141-149]
Elastic Spring Back Experimental Investigation of Metal Powder Compaction without Using Lubricant [Volume 2, Issue 3, 2016, Pages 141-149]
Electro-deposition Investigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite [Volume 1, Issue 2, 2015, Pages 85-90]
Electro-Fenton Petrochemical wastewater treatment by modified electro-Fenton process with nano iron particles [Volume 1, Issue 4, 2015, Pages 215-223]
Electronic parameter The computational study of the tautomerization of Dacarbazine in a biological system: The DFT approach [Volume 6, Issue 1, 2020, Pages 55-60]
Electronic parameter Theoretical study of the tautomerization of Carmustine in a biological media as an anti-cancer drug [Volume 7, Issue 1, 2021, Pages 51-57]
Electrophoretic deposition Effect of ion concentration on viscosity, electrical conductivity and deposit weight of doped nano alumina prepared by electrophoretic deposition [Volume 2, Issue 2, 2016, Pages 55-68]
Electrophoretic deposition Electrophoretic deposition and corrosion behavior study of aluminum coating on AZ91D substrate [Volume 3, Issue 4, 2017, Pages 219-232]
Elwadi Elgedid Preliminary study on upgrading silica sand from the Elwadi Elgedid, Western Desert, Egypt for compatibility with various industrial applications [Volume 7, Issue 2, 2021, Pages 107-117]
Empirical correlation An experimental investigation on drying kinetics of calcium carbonate [Volume 1, Issue 3, 2015, Pages 153-162]
Enamel glaze Microstructure and optical properties of lustre glazes produced on a copper body [Volume 9, Issue 2, 2023, Pages 115-123]
Encapsulated microbubble A modified Marmottant model to study the effects of a shell rupture on the subharmonic threshold of encapsulated microbubbles [Volume 7, Issue 1, 2021, Pages 41-50]
Energy modeling Energy Modeling and Simulation including particle technologies within Single and Double Pass Solar Air Heaters [Volume 2, Issue 2, 2016, Pages 95-102]
Energy performance Energy Modeling and Simulation including particle technologies within Single and Double Pass Solar Air Heaters [Volume 2, Issue 2, 2016, Pages 95-102]
Engineered Cementitious Composite The influence of cellulose pulp and cellulose microfibers on the flexural performance of green-engineered cementitious composites [Volume 3, Issue 1, 2017, Pages 33-40]
Epoxy-based composite Effect of surface-functionalization of Na⁺-montmorillonite nanoclay using 3-aminopropyltrimethoxy silane on the mechanical properties of E-glass chopped strand mat/epoxy composites [Volume 4, Issue 2, 2018, Pages 59-65]
Epoxy-matrix nanocomposite On the positron annihilation spectroscopy and tensile behavior of COOH-MWCNT/epoxy nanocomposites [Volume 10, Issue 1, 2024, Pages 51-57]
Erbium Effect of graphene nanoplatelets on the microstructure and mechanical behavior of erbium-modified Al-7.5Si-0.5Mg alloy [Volume 6, Issue 1, 2020, Pages 37-45]
Esterification Fe₃O₄@ZrO₂-SO₃H Nanoparticles: A new magnetically retrievable catalyst for esterification of mono- and dicarboxylic acids [Volume 4, Issue 1, 2018, Pages 1-12]
Esterification Fe₃O₄@SiO₂–SO₃H Nanoparticles: An efficient magnetically retrievable catalyst for esterification reactions [Volume 4, Issue 2, 2018, Pages 67-79]
Ethyl pyridinium iodide ZnS/ZnO heterostructure semiconductor: A promising ionic liquid media approach without calcination [Volume 8, Issue 2, 2022, Pages 115-119]
Eulerian/Lagrangian approach Numerical investigation of the effect of different parameters on emitted shockwave from bubble collapse in a nozzle [Volume 6, Issue 2, 2020, Pages 67-80]
Exergy Efficiency Enhancement in energy and exergy efficiency of a solar receiver using suspended alumina nanparticles (nanofluid) as heat transfer fluid [Volume 1, Issue 2, 2015, Pages 73-83]

F

Fatty acid A spray pyrolysis method for fabrication of superhydrophobic copper substrate based on modified-alumina powder by fatty acid [Volume 6, Issue 1, 2020, Pages 25-36]
FCC catalyst particles FCC catalyst attrition behavior at high temperatures [Volume 5, Issue 4, 2019, Pages 135-143]
Fe3O4 nanoparticles Investigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite [Volume 1, Issue 2, 2015, Pages 85-90]
Fe-Cr nanocatalyst Kinetic Modeling of the High Temperature Water Gas Shift Reaction on a Novel Fe-Cr Nanocatalyst by Using Various Kinetic Mechanisms [Volume 1, Issue 1, 2015, Pages 13-19]
Fe₃O₄@THAM-CH₂CH₂Cl Application of Fe₃O₄@THAM-CH₂CH₂Cl magnetic nanoparticle as a new adsorbent in ultrasonically assisted removal of Congo red from aqueous solutions [Volume 8, Issue 2, 2022, Pages 103-114]
Fe₃O₄@ZrO₂-supported sulfonic acid Fe₃O₄@ZrO₂-SO₃H Nanoparticles: A new magnetically retrievable catalyst for esterification of mono- and dicarboxylic acids [Volume 4, Issue 1, 2018, Pages 1-12]
Fiber-reinforced composite Enhancement of E-glass fiber/epoxy composite bending performance via graphene addition [Volume 6, Issue 2, 2020, Pages 61-65]
Fibers Diameter Geometric parameters effect on the reaction zone of premixed CH₄ catalytic combustion in a fibrous porous medium [Volume 8, Issue 1, 2022, Pages 1-7]
Fibers Orientation Geometric parameters effect on the reaction zone of premixed CH₄ catalytic combustion in a fibrous porous medium [Volume 8, Issue 1, 2022, Pages 1-7]
Fibrous Porous Medium Geometric parameters effect on the reaction zone of premixed CH₄ catalytic combustion in a fibrous porous medium [Volume 8, Issue 1, 2022, Pages 1-7]
Finite Element Effect of physical properties on the oscillation of an acoustically levitated droplet [Volume 10, Issue 1, 2024, Pages 33-40]
Fischer-Tropsch synthesis Feasibility study on the use of MIL-53(Al) as a support for iron catalysts in the CO hydrogenation reaction [Volume 9, Issue 1, 2023, Pages 43-49]
Fixed Bed Reactor Effects of catalyst particle size on methanol dehydration at different temperatures and weight hourly space velocities [Volume 2, Issue 1, 2016, Pages 41-47]
Flameless Combustion Experimental evaluation of a dual-function solution for reducing flue gas pollutants using low-temperature counter-diffusive combustion of methane with Au_0.06-Pd_0.06/Al₂O₃ Catalyst [Volume 10, Issue 1, 2024, Pages 41-49]
Flame Speed Effect of Radiation Heat Loss and Ventilation on Dust Explosions in Spherical Vessels [Volume 1, Issue 1, 2015, Pages 57-64]
Flexural behavior The influence of cellulose pulp and cellulose microfibers on the flexural performance of green-engineered cementitious composites [Volume 3, Issue 1, 2017, Pages 33-40]
Floating catalyst Predictive modeling of the length of prepared CNT by CVD through ANN-MPSO and GEP [Volume 5, Issue 4, 2019, Pages 145-159]
Flowability Evaluation of the effect of granulation processing parameters on the granule properties: Lactose- Cornstarch case study [Volume 1, Issue 3, 2015, Pages 171-182]
Flow channeling Numerical simulation of effect of non-spherical particle shape and bed size on hydrodynamics of packed beds [Volume 3, Issue 3, 2017, Pages 133-143]
Flow pattern Cyclone separator theories to predict performance and flow characteristics [Volume 7, Issue 2, 2021, Pages 83-98]
Fluidized Bed Granulation Evaluation of the effect of granulation processing parameters on the granule properties: Lactose- Cornstarch case study [Volume 1, Issue 3, 2015, Pages 171-182]
Forward Osmosis (FO) Thin film nanocomposite forward osmosis membrane prepared by graphene oxide embedded PSf substrate [Volume 2, Issue 2, 2016, Pages 103-117]
Fresh minced meat Inhibition of Staphylococcus aureus growth in fresh calf minced meat using low density Polyethylene films package promoted by titanium dioxide and zinc oxide nanoparticles [Volume 3, Issue 1, 2017, Pages 1-11]
Froth flotation Technologies for processing of barite: A Conceptual review for use in Nigeria [(Articles in Press)]
Fuel Cells Modified CNTs/Nafion composite: The role of sulfonate groups on the performance of prepared proton exchange methanol fuel cell’s membrane [Volume 3, Issue 4, 2017, Pages 211-218]

G

Gain ratio Diagnosis of the disease using an ant colony gene selection method based on information gain ratio using fuzzy rough sets [Volume 3, Issue 4, 2017, Pages 175-186]
Gamma-ray On study of X-ray absorption and properties of dispersion of W, MoS₂ and B₄C particles in high density polyethylene [Volume 3, Issue 1, 2017, Pages 13-24]
Gas transportation A Review of Manufacturing Process of Polyethylene Pipe and Connectors for Applying in High-Pressure Natural Gas Pipelines [Volume 1, Issue 3, 2015, Pages 129-140]
Gd2O3 nanoparticles Preparation of Gd2O3 nanoparticles from a new precursor and their catalytic activity for electrochemical reduction of CO2 to CO [Volume 1, Issue 1, 2015, Pages 21-30]
Gd(III) complex Preparation of Gd2O3 nanoparticles from a new precursor and their catalytic activity for electrochemical reduction of CO2 to CO [Volume 1, Issue 1, 2015, Pages 21-30]
Gelatin Optimization of an ecofriendly coating containing chitosan and gelatin as corrosion inhibitor of carbon steel grade E by Response Surface Method [Volume 5, Issue 1, 2019, Pages 23-31]
Gene expression programming Predictive modeling of the length of prepared CNT by CVD through ANN-MPSO and GEP [Volume 5, Issue 4, 2019, Pages 145-159]
Geopolymer concrete The effect of adding nano-silica on the ultrasonic pulse velocity of geopolymer concrete [Volume 7, Issue 2, 2021, Pages 99-105]
Granule Mean Size Evaluation of the effect of granulation processing parameters on the granule properties: Lactose- Cornstarch case study [Volume 1, Issue 3, 2015, Pages 171-182]
Graphene Effect of graphene nanoplatelets on the microstructure and mechanical behavior of erbium-modified Al-7.5Si-0.5Mg alloy [Volume 6, Issue 1, 2020, Pages 37-45]
Graphene nanoplatelets Enhancement of E-glass fiber/epoxy composite bending performance via graphene addition [Volume 6, Issue 2, 2020, Pages 61-65]
Graphene Oxide nanoplates Thin film nanocomposite forward osmosis membrane prepared by graphene oxide embedded PSf substrate [Volume 2, Issue 2, 2016, Pages 103-117]
Gravity separation Barite processing for industrial use – A bibliographic survey [Volume 10, Issue 1, 2024, Pages 19-32]
Gravity separation Technologies for processing of barite: A Conceptual review for use in Nigeria [(Articles in Press)]
Green composite The influence of cellulose pulp and cellulose microfibers on the flexural performance of green-engineered cementitious composites [Volume 3, Issue 1, 2017, Pages 33-40]
Green method A green approach for the synthesis of silver nanoparticles using Lithospermum officinale root extract and evaluation of their antioxidant activity [Volume 3, Issue 4, 2017, Pages 187-195]
Green nanocatalyst Synthesis and characterization of the aminated nano-zeolite: A green heterogeneous nanocatalyst for the synthesis of valuable organic compounds [Volume 8, Issue 1, 2022, Pages 53-62]
Grindability The effect of microwave radiation on grinding kinetics by selection function and breakage function - A case study of low-grade siliceous manganese ores [Volume 4, Issue 1, 2018, Pages 39-47]

H

Hardness Fabrication method, microstructural characteristics, and hardness behavior of an interpenetrating phases hybrid aluminum/alumina-nanodiamond composite [Volume 9, Issue 2, 2023, Pages 63-71]
Hawthorn Drying Effect of process parameters on quality properties and drying time of hawthorn in a vibro-fluidized bed dryer [Volume 3, Issue 1, 2017, Pages 51-62]
Heat storage Effects of Fe₂O₃ addition and mechanical activation on thermochemical heat storage properties of the Co₃O₄/CoO system [Volume 4, Issue 1, 2018, Pages 13-22]
Heat transfer Energy Modeling and Simulation including particle technologies within Single and Double Pass Solar Air Heaters [Volume 2, Issue 2, 2016, Pages 95-102]
Heat transfer Pool boiling heat transfer coefficient of pure liquids using dimensional analysis [Volume 3, Issue 2, 2017, Pages 63-69]
Heavy metal ions Removal of Heavy Metal Particles by LTJ, ANA, SVR, BEC and MER zeolites particles: A Molecular Dynamics Simulation Study [Volume 1, Issue 2, 2015, Pages 99-111]
High temperature FCC catalyst attrition behavior at high temperatures [Volume 5, Issue 4, 2019, Pages 135-143]
Hybrid artificial neural network Predictive modeling of the length of prepared CNT by CVD through ANN-MPSO and GEP [Volume 5, Issue 4, 2019, Pages 145-159]
Hydrogel Study of different methods to induce crosslinking of polyacrylamide for agriculture process [Volume 5, Issue 1, 2019, Pages 1-11]
Hydrogel nanocomposite Synthesis and structural properties of Polyvinylpyrrolidone based nanocomposite hydrogels for isoniazid drug delivery [Volume 1, Issue 3, 2015, Pages 183-193]
Hydrogen Economy Assessment of an atmospheric heavy metal from a transport pool within the Ilorin Metropolis, Nigeria [Volume 7, Issue 1, 2021, Pages 11-21]
Hydrophilic Investigation of mass transfer coefficients in irregular packed liquid-liquid extraction columns in the presence of various nanoparticles [Volume 3, Issue 2, 2017, Pages 113-120]
Hydrophobic Investigation of mass transfer coefficients in irregular packed liquid-liquid extraction columns in the presence of various nanoparticles [Volume 3, Issue 2, 2017, Pages 113-120]
Hydrophobic membrane Fabrication and optimization of superhydrophobic ZnO-SA/PVC/PVP nanocomposite membrane distillation for highly saline RO brine recovery [Volume 9, Issue 2, 2023, Pages 103-113]
Hydrophobic modification Iranian natural zeolite particle modification: Green synthesis, characterization, and oil spill remediation [Volume 5, Issue 2, 2019, Pages 77-90]
Hydrothermal A new precursor for preparation of magnetite (Fe₃O₄) nanoparticles [Volume 1, Issue 2, 2015, Pages 65-72]
Hydroxy compounds Fe₃O₄@SiO₂/AEPTMS/Fe(OTf)₃: An efficient superparamagnetic nanocatalyst for the protecting of alcohols [Volume 9, Issue 1, 2023, Pages 1-9]

I

Imidazolone A novel application of Co₃O₄@SiO₂ nanocomposite as an efficient and robust catalyst for the preparation of some imidazolone derivatives [Volume 4, Issue 2, 2018, Pages 111-117]
Induction time Interpreting the effect of operating variable, seed, and impurity on the induction time of silver nanoparticles precipitation by cluster coagulation models [Volume 4, Issue 2, 2018, Pages 81-90]
Inhibitor Talinum triangulare leaf and Musa sapientum peel extracts as corrosion inhibitors on ZA-27 Alloy [Volume 4, Issue 1, 2018, Pages 23-28]
In situ micronization A new method for the preparation of pure acamprosate calcium with a micron particle size [Volume 8, Issue 1, 2022, Pages 17-23]
In-Situ Polymerization The effect of nanoclay on the creation of clusters of polyamide 6 microfibrils [Volume 8, Issue 1, 2022, Pages 25-37]
Interfacial bonding Effect of surface-functionalization of Na⁺-montmorillonite nanoclay using 3-aminopropyltrimethoxy silane on the mechanical properties of E-glass chopped strand mat/epoxy composites [Volume 4, Issue 2, 2018, Pages 59-65]
Internal Concentration Polarization (ICP) Thin film nanocomposite forward osmosis membrane prepared by graphene oxide embedded PSf substrate [Volume 2, Issue 2, 2016, Pages 103-117]
Interpenetrating phases Mechanical behavior of magnesium-steel particles composites with interpenetrating phases [Volume 9, Issue 1, 2023, Pages 29-34]
Interpenetrating phases Fabrication method, microstructural characteristics, and hardness behavior of an interpenetrating phases hybrid aluminum/alumina-nanodiamond composite [Volume 9, Issue 2, 2023, Pages 63-71]
Ion-exchange Removal of Heavy Metal Particles by LTJ, ANA, SVR, BEC and MER zeolites particles: A Molecular Dynamics Simulation Study [Volume 1, Issue 2, 2015, Pages 99-111]
Ion Exchange Resin Application of response surface methodology for thorium(IV) removal using Amberlite IR-120 and IRA-400: Ion exchange equilibrium and kinetics [Volume 3, Issue 2, 2017, Pages 101-112]
Ionic gelation Development and characterization of optimized sustained release voriconazole-loaded chitosan nanoparticles for ocular delivery [Volume 7, Issue 1, 2021, Pages 1-10]
Ionic liquid A new precursor for preparation of magnetite (Fe₃O₄) nanoparticles [Volume 1, Issue 2, 2015, Pages 65-72]
IR Spectra Computational study of electronic, spectroscopic, and chemical properties of (CdO)n (n=1-7) nanoclusters as a transparent conducting oxide [Volume 1, Issue 4, 2015, Pages 195-204]
Isoniazid Synthesis and structural properties of Polyvinylpyrrolidone based nanocomposite hydrogels for isoniazid drug delivery [Volume 1, Issue 3, 2015, Pages 183-193]
Isotherm A comparative study of malachite green removal from an aqueous solution using raw and chemically modified expanded perlite [Volume 3, Issue 2, 2017, Pages 79-87]
Isotherm Adsorption of CO₂ and SO₂ on multi-walled carbon nanotubes: experimental data and modeling using artificial neural network [Volume 5, Issue 1, 2019, Pages 33-45]

J

Jamming Effects of local vibration on silo discharge and jamming: Employing an experimental approach [Volume 4, Issue 2, 2018, Pages 91-100]
Jaw crusher Crushing analysis of the industrial cage mill and the laboratory jaw crusher [Volume 3, Issue 3, 2017, Pages 155-161]

K

Keratitis Development and characterization of optimized sustained release voriconazole-loaded chitosan nanoparticles for ocular delivery [Volume 7, Issue 1, 2021, Pages 1-10]
Keywords: Process optimization Maltodextrine nanoparticles loaded with polyphenolic extract from apple industrial waste: preparation, optimization and characterization [Volume 3, Issue 4, 2017, Pages 197-209]
Kinetic and thermodynamic Heavy metal removal using SnO₂ nanoparticles prepared in a grape extract media [Volume 9, Issue 2, 2023, Pages 51-61]
Kinetics Removal of crystal violet from aquatic environment by surfactant-modified dolomite [Volume 2, Issue 3, 2016, Pages 173-182]

L

LDPE films Inhibition of Staphylococcus aureus growth in fresh calf minced meat using low density Polyethylene films package promoted by titanium dioxide and zinc oxide nanoparticles [Volume 3, Issue 1, 2017, Pages 1-11]
Liquid-liquid extraction Investigation of mass transfer coefficients in irregular packed liquid-liquid extraction columns in the presence of various nanoparticles [Volume 3, Issue 2, 2017, Pages 113-120]
Lustre glaze Microstructure and optical properties of lustre glazes produced on a copper body [Volume 9, Issue 2, 2023, Pages 115-123]

M

Magnesium Mechanical behavior of magnesium-steel particles composites with interpenetrating phases [Volume 9, Issue 1, 2023, Pages 29-34]
Magnetic acid catalyst Fe₃O₄@ZrO₂-SO₃H Nanoparticles: A new magnetically retrievable catalyst for esterification of mono- and dicarboxylic acids [Volume 4, Issue 1, 2018, Pages 1-12]
Magnetic iron oxide Fe₃O₄@SiO₂/AEPTMS/Fe(OTf)₃: An efficient superparamagnetic nanocatalyst for the protecting of alcohols [Volume 9, Issue 1, 2023, Pages 1-9]
Magnetic Nanoparticles Surface decorated magnetite nanoparticles with birhodanine and MoO₂Cl₂(dmf)₂ as a new magnetic catalyst for epoxidation of olefins [Volume 5, Issue 1, 2019, Pages 47-60]
Magnetic properties Synthesis, characterization, and magnetic properties of NiFe₂O₄ nanoparticles [Volume 8, Issue 2, 2022, Pages 79-85]
Magnetite A new precursor for preparation of magnetite (Fe₃O₄) nanoparticles [Volume 1, Issue 2, 2015, Pages 65-72]
Magnetoexciton Exciton properties in 2D-Xenes nanomaterials within quantum field approaches [Volume 7, Issue 2, 2021, Pages 59-71]
Malachite green A comparative study of malachite green removal from an aqueous solution using raw and chemically modified expanded perlite [Volume 3, Issue 2, 2017, Pages 79-87]
Mass spectrum Exciton properties in 2D-Xenes nanomaterials within quantum field approaches [Volume 7, Issue 2, 2021, Pages 59-71]
Mass transfer coefficient Investigation of mass transfer coefficients in irregular packed liquid-liquid extraction columns in the presence of various nanoparticles [Volume 3, Issue 2, 2017, Pages 113-120]
Mathematical modelling Effect of process parameters on quality properties and drying time of hawthorn in a vibro-fluidized bed dryer [Volume 3, Issue 1, 2017, Pages 51-62]
Maximum diameter Point and interval evaluation of nanoparticles censored sample in the spray process [Volume 5, Issue 2, 2019, Pages 91-99]
Mechanical activation Preparation of pure cordierite through heat treatment of combustion synthesized magnesium aluminate spinel and silica nanoparticles [Volume 9, Issue 1, 2023, Pages 11-18]
Mechanical milling Synthesis and Statistical Analysis of Changing Size of Nano-structured PbO2 during Mechanical Milling Using Taguchi Methodology [Volume 2, Issue 1, 2016, Pages 49-54]
Mechanogrinding Iranian natural zeolite particle modification: Green synthesis, characterization, and oil spill remediation [Volume 5, Issue 2, 2019, Pages 77-90]
Melt mixing Composite processing and study of properties for polypropylene EPD60R/modified nanoclay Cloisite^® 15A [Volume 5, Issue 2, 2019, Pages 101-108]
Membrane distillation Fabrication and optimization of superhydrophobic ZnO-SA/PVC/PVP nanocomposite membrane distillation for highly saline RO brine recovery [Volume 9, Issue 2, 2023, Pages 103-113]
Membrane permeability Modified CNTs/Nafion composite: The role of sulfonate groups on the performance of prepared proton exchange methanol fuel cell’s membrane [Volume 3, Issue 4, 2017, Pages 211-218]
Metal-Organic framework Feasibility study on the use of MIL-53(Al) as a support for iron catalysts in the CO hydrogenation reaction [Volume 9, Issue 1, 2023, Pages 43-49]
Methanol Hollow alumina nanospheres as novel catalyst for the conversion of methanol to dimethyl ether [Volume 2, Issue 1, 2016, Pages 15-22]
Methanol Dehydration Effects of catalyst particle size on methanol dehydration at different temperatures and weight hourly space velocities [Volume 2, Issue 1, 2016, Pages 41-47]
Methylene Blue Modified bentonite as adsorbent material for the removal of the basic dye methylene blue from aqueous solutions [Volume 7, Issue 1, 2021, Pages 23-31]
Methyl orange Synthesis, structural characterization and catalytic activity of TiO2/Al2O3 photo-composite [Volume 1, Issue 1, 2015, Pages 31-38]
Methyl orange Photocatalytic degradation of methyl orange using TiO₂:Mg²⁺/zeolite composite under visible light irradiation [Volume 6, Issue 1, 2020, Pages 1-12]
Mg Photocatalytic degradation of methyl orange using TiO₂:Mg²⁺/zeolite composite under visible light irradiation [Volume 6, Issue 1, 2020, Pages 1-12]
MgAl₂O₄ Spinel Preparation of pure cordierite through heat treatment of combustion synthesized magnesium aluminate spinel and silica nanoparticles [Volume 9, Issue 1, 2023, Pages 11-18]
MHD MHD Three-Dimensional Stagnation-Point Flow and Heat Transfer of a Nanofluid over a Stretching Sheet [Volume 1, Issue 3, 2015, Pages 141-151]
MHD mixed convection Effects of Brownian motion and Thermophoresis on MHD Mixed Convection Stagnation-point Flow of a Nanofluid Toward a Stretching Vertical Sheet in Porous Medium [Volume 1, Issue 4, 2015, Pages 225-240]
Micro-Channel Reactor Effects of catalyst particle size on methanol dehydration at different temperatures and weight hourly space velocities [Volume 2, Issue 1, 2016, Pages 41-47]
Microfluidic application Activated pharmaceutical ingredients produced by microreactors versus batch processes: A review [Volume 8, Issue 2, 2022, Pages 63-78]
Micromixer Activated pharmaceutical ingredients produced by microreactors versus batch processes: A review [Volume 8, Issue 2, 2022, Pages 63-78]
Micronized drugs A new method for the preparation of pure topiramate with a micron particle size [Volume 3, Issue 3, 2017, Pages 169-174]
Micronized drugs A new method for the preparation of pure acamprosate calcium with a micron particle size [Volume 8, Issue 1, 2022, Pages 17-23]
Microreactor Activated pharmaceutical ingredients produced by microreactors versus batch processes: A review [Volume 8, Issue 2, 2022, Pages 63-78]
Micro-spheres Effect of Sn Doping on Structural and Optical Properties of 2D α-MoO3 Nanostructures [Volume 2, Issue 2, 2016, Pages 87-93]
Microstructure Fabrication method, microstructural characteristics, and hardness behavior of an interpenetrating phases hybrid aluminum/alumina-nanodiamond composite [Volume 9, Issue 2, 2023, Pages 63-71]
Microwave treatment The effect of microwave radiation on grinding kinetics by selection function and breakage function - A case study of low-grade siliceous manganese ores [Volume 4, Issue 1, 2018, Pages 39-47]
Middle coal Crushing analysis of the industrial cage mill and the laboratory jaw crusher [Volume 3, Issue 3, 2017, Pages 155-161]
Mn₃O₄/Fe₃O₄ nanocomposite Synthesizing Fe₃O₄, Mn₃O₄ and Mn₃O₄/Fe₃O₄ nanocatalysts using the sol-gel method as new precursors for the degradation of phenol by catalytic ozonation [Volume 8, Issue 1, 2022, Pages 39-51]
Modeling Drying of calcium carbonate in a batch spouted bed dryer: optimization and kinetics modeling [Volume 3, Issue 2, 2017, Pages 89-99]
Modeling Optimization of SiC particle distribution during compocasting of A356-SiC_p composites using D-optimal experiment design [Volume 3, Issue 3, 2017, Pages 145-154]
Modelling Dynamic modelling of hardness changes of aluminium nanostructure during mechanical ball milling process [Volume 3, Issue 1, 2017, Pages 25-32]
Modification Investigation of phosphate adsorption from aqueous media using synthetic mordenite and modified natural clinoptilolite zeolite adsorbents: characteristics, kinetics, and isotherms [Volume 7, Issue 2, 2021, Pages 119-130]
Modified bentonite Modified bentonite as adsorbent material for the removal of the basic dye methylene blue from aqueous solutions [Volume 7, Issue 1, 2021, Pages 23-31]
Modified carbon paste electrode Combustion synthesis of sponge-like CeO₂ powder for selective determination of uric acid in biological fluids [Volume 7, Issue 2, 2021, Pages 73-82]
Modified perlite A comparative study of malachite green removal from an aqueous solution using raw and chemically modified expanded perlite [Volume 3, Issue 2, 2017, Pages 79-87]
Molecular dynamics simulation Removal of Heavy Metal Particles by LTJ, ANA, SVR, BEC and MER zeolites particles: A Molecular Dynamics Simulation Study [Volume 1, Issue 2, 2015, Pages 99-111]
Molybdenum trioxide Effect of Sn Doping on Structural and Optical Properties of 2D α-MoO3 Nanostructures [Volume 2, Issue 2, 2016, Pages 87-93]
Monochlorobenzene (MCB) A sol-gel based method for preparation of Ni/La-Al2O3 as a new catalyst for dechlorination of monochlorobenzene [Volume 1, Issue 2, 2015, Pages 113-120]
Monoclinic Synthesis of pure monoclinic zirconia nanoparticles using ultrasound cavitation technique [Volume 2, Issue 2, 2016, Pages 69-77]
MoO₂Cl₂(dmf)₂ Surface decorated magnetite nanoparticles with birhodanine and MoO₂Cl₂(dmf)₂ as a new magnetic catalyst for epoxidation of olefins [Volume 5, Issue 1, 2019, Pages 47-60]
Multicomponent reaction Zn₂SnO₄ nanostructure as an efficient catalyst for the preparation of pyrano[3,2-c]chromene and pyrano[4,3-b]pyran derivatives under ultrasonic irradiation conditions [Volume 5, Issue 1, 2019, Pages 61-69]
Multi-layer perceptron Modeling heat transfer of non-Newtonian nanofluids using hybrid ANN-Metaheuristic optimization algorithm [Volume 3, Issue 4, 2017, Pages 233-241]
Multivariate methods Application of Fe₃O₄@THAM-CH₂CH₂Cl magnetic nanoparticle as a new adsorbent in ultrasonically assisted removal of Congo red from aqueous solutions [Volume 8, Issue 2, 2022, Pages 103-114]
MWCNT Adsorption of CO₂ and SO₂ on multi-walled carbon nanotubes: experimental data and modeling using artificial neural network [Volume 5, Issue 1, 2019, Pages 33-45]
MWCNT On the positron annihilation spectroscopy and tensile behavior of COOH-MWCNT/epoxy nanocomposites [Volume 10, Issue 1, 2024, Pages 51-57]

N

Nafion Modified CNTs/Nafion composite: The role of sulfonate groups on the performance of prepared proton exchange methanol fuel cell’s membrane [Volume 3, Issue 4, 2017, Pages 211-218]
Nanoclay Composite processing and study of properties for polypropylene EPD60R/modified nanoclay Cloisite^® 15A [Volume 5, Issue 2, 2019, Pages 101-108]
Nanoclay The effect of nanoclay on the creation of clusters of polyamide 6 microfibrils [Volume 8, Issue 1, 2022, Pages 25-37]
Nanoclay particles Investigating the effects of chemical modification of clay nanoparticles on thermal degradation and mechanical properties of TPU/nanoclay composites [Volume 1, Issue 1, 2015, Pages 1-11]
Nanocluster Computational study of electronic, spectroscopic, and chemical properties of (CdO)n (n=1-7) nanoclusters as a transparent conducting oxide [Volume 1, Issue 4, 2015, Pages 195-204]
Nanocomposite Investigating the effects of chemical modification of clay nanoparticles on thermal degradation and mechanical properties of TPU/nanoclay composites [Volume 1, Issue 1, 2015, Pages 1-11]
Nanocomposite Synthesis and characterization of Polyaniline Nanocomposite by Using Several Types of Surfactants in Aqueous Media [Volume 1, Issue 3, 2015, Pages 163-170]
Nanocomposite A novel application of Co₃O₄@SiO₂ nanocomposite as an efficient and robust catalyst for the preparation of some imidazolone derivatives [Volume 4, Issue 2, 2018, Pages 111-117]
Nanocomposite Composite processing and study of properties for polypropylene EPD60R/modified nanoclay Cloisite^® 15A [Volume 5, Issue 2, 2019, Pages 101-108]
Nanocomposite Substrates Thin film nanocomposite forward osmosis membrane prepared by graphene oxide embedded PSf substrate [Volume 2, Issue 2, 2016, Pages 103-117]
Nanodiamond Fabrication method, microstructural characteristics, and hardness behavior of an interpenetrating phases hybrid aluminum/alumina-nanodiamond composite [Volume 9, Issue 2, 2023, Pages 63-71]
Nanoencapsulation Maltodextrine nanoparticles loaded with polyphenolic extract from apple industrial waste: preparation, optimization and characterization [Volume 3, Issue 4, 2017, Pages 197-209]
Nanofluid Enhancement in energy and exergy efficiency of a solar receiver using suspended alumina nanparticles (nanofluid) as heat transfer fluid [Volume 1, Issue 2, 2015, Pages 73-83]
Nanofluid MHD Three-Dimensional Stagnation-Point Flow and Heat Transfer of a Nanofluid over a Stretching Sheet [Volume 1, Issue 3, 2015, Pages 141-151]
Nanofluid Effects of Brownian motion and Thermophoresis on MHD Mixed Convection Stagnation-point Flow of a Nanofluid Toward a Stretching Vertical Sheet in Porous Medium [Volume 1, Issue 4, 2015, Pages 225-240]
Nanofluid CFD simulations on natural convection heat transfer of alumina-water nanofluid with Brownian motion effect in a 3-D enclosure [Volume 2, Issue 3, 2016, Pages 163-171]
Nanofluids Modeling heat transfer of non-Newtonian nanofluids using hybrid ANN-Metaheuristic optimization algorithm [Volume 3, Issue 4, 2017, Pages 233-241]
Nanofluids Numerical simulation of nanofluids flow and heat transfer through isosceles triangular channels [Volume 4, Issue 1, 2018, Pages 29-38]
Nanofluids Fabrication of Zn_1-XCu_XO nanoparticles and investigation of their effect on the thermal conductivity of nanofluids [Volume 8, Issue 2, 2022, Pages 95-102]
Nano iron particles Petrochemical wastewater treatment by modified electro-Fenton process with nano iron particles [Volume 1, Issue 4, 2015, Pages 215-223]
Nanomaterials Synthesis, characterization, and magnetic properties of NiFe₂O₄ nanoparticles [Volume 8, Issue 2, 2022, Pages 79-85]
Nanoparticel Application of CdO nanocatalyst in the acetylation of benzyl alcohols and degradation of sulfathiazole as a green approach [Volume 4, Issue 1, 2018, Pages 49-57]
Nano-platelets Effect of Sn Doping on Structural and Optical Properties of 2D α-MoO3 Nanostructures [Volume 2, Issue 2, 2016, Pages 87-93]
Nanoprecipitation Maltodextrine nanoparticles loaded with polyphenolic extract from apple industrial waste: preparation, optimization and characterization [Volume 3, Issue 4, 2017, Pages 197-209]
Nano– silica The effect of adding nano-silica on the ultrasonic pulse velocity of geopolymer concrete [Volume 7, Issue 2, 2021, Pages 99-105]
Nanospherical Application of CdO nanocatalyst in the acetylation of benzyl alcohols and degradation of sulfathiazole as a green approach [Volume 4, Issue 1, 2018, Pages 49-57]
Nanostructure Dynamic modelling of hardness changes of aluminium nanostructure during mechanical ball milling process [Volume 3, Issue 1, 2017, Pages 25-32]
Nano-structure Synthesis and Statistical Analysis of Changing Size of Nano-structured PbO2 during Mechanical Milling Using Taguchi Methodology [Volume 2, Issue 1, 2016, Pages 49-54]
Narrow band gap ZnS/ZnO heterostructure semiconductor: A promising ionic liquid media approach without calcination [Volume 8, Issue 2, 2022, Pages 115-119]
Na⁺-montmorillonite nanoclay Effect of surface-functionalization of Na⁺-montmorillonite nanoclay using 3-aminopropyltrimethoxy silane on the mechanical properties of E-glass chopped strand mat/epoxy composites [Volume 4, Issue 2, 2018, Pages 59-65]
Natural convection CFD simulations on natural convection heat transfer of alumina-water nanofluid with Brownian motion effect in a 3-D enclosure [Volume 2, Issue 3, 2016, Pages 163-171]
Natural polymers Maltodextrine nanoparticles loaded with polyphenolic extract from apple industrial waste: preparation, optimization and characterization [Volume 3, Issue 4, 2017, Pages 197-209]
Natural Zeolite Iranian natural zeolite particle modification: Green synthesis, characterization, and oil spill remediation [Volume 5, Issue 2, 2019, Pages 77-90]
NCP@SiO₃Pr(CH₂)₆N₄ Synthesis and characterization of the aminated nano-zeolite: A green heterogeneous nanocatalyst for the synthesis of valuable organic compounds [Volume 8, Issue 1, 2022, Pages 53-62]
NFD model Dynamic modelling of hardness changes of aluminium nanostructure during mechanical ball milling process [Volume 3, Issue 1, 2017, Pages 25-32]
Ni-Doped CaTiO₃ Synthesis and characterization of Ni-doped CaTiO₃ nano-powders and their potential for the removal of Cd from wastewaters [Volume 8, Issue 1, 2022, Pages 9-16]
NiFe₂O₄ Synthesis, characterization, and magnetic properties of NiFe₂O₄ nanoparticles [Volume 8, Issue 2, 2022, Pages 79-85]
NiFe₂O₄ Meso-adsorbent Preparation and application of meso-adsorbent NiFe₂O₄ for the ultrasound-enhanced removal of dye pollutant in water and wastewater: A multivariate study [Volume 6, Issue 2, 2020, Pages 103-111]
Ni/La-Al2O3 catalyst A sol-gel based method for preparation of Ni/La-Al2O3 as a new catalyst for dechlorination of monochlorobenzene [Volume 1, Issue 2, 2015, Pages 113-120]
NMR measurement The measurement of droplet size distribution of water-oil emulsion through NMR method [Volume 2, Issue 1, 2016, Pages 31-39]
Noble metal nanoparticles Microstructure and optical properties of lustre glazes produced on a copper body [Volume 9, Issue 2, 2023, Pages 115-123]
Non-Newtonian Modeling heat transfer of non-Newtonian nanofluids using hybrid ANN-Metaheuristic optimization algorithm [Volume 3, Issue 4, 2017, Pages 233-241]
Non-spherical particles Numerical simulation of effect of non-spherical particle shape and bed size on hydrodynamics of packed beds [Volume 3, Issue 3, 2017, Pages 133-143]
Nozzle Numerical investigation of the effect of different parameters on emitted shockwave from bubble collapse in a nozzle [Volume 6, Issue 2, 2020, Pages 67-80]
Numerical simulation Numerical simulation of nanofluids flow and heat transfer through isosceles triangular channels [Volume 4, Issue 1, 2018, Pages 29-38]
Nusselt Number Numerical simulation of nanofluids flow and heat transfer through isosceles triangular channels [Volume 4, Issue 1, 2018, Pages 29-38]
Nylon-66 Investigation of Mechanical Properties Prediction of Synthesized Nylon-66/Nano-Calcium Carbonate Composites [Volume 1, Issue 4, 2015, Pages 241-251]

O

Obubra Investigating the effects of elutriation in upgrading middle-grade barite ore from Obubra, Cross River State, Nigeria for drilling mud applications [Volume 10, Issue 1, 2024, Pages 1-8]
Ocular Delivery Development and characterization of optimized sustained release voriconazole-loaded chitosan nanoparticles for ocular delivery [Volume 7, Issue 1, 2021, Pages 1-10]
One-pot synthesis One-Pot solvent-free synthesis of Highly Substituted Imidazoles catalyzed by zeolite [Volume 1, Issue 4, 2015, Pages 253-263]
OpenFOAM Numerical investigation of the effect of nanoparticle sedimentation on the thermal behavior of cavities with different cross-sectional shapes [Volume 9, Issue 2, 2023, Pages 73-84]
Optimization Optimization of SiC particle distribution during compocasting of A356-SiC_p composites using D-optimal experiment design [Volume 3, Issue 3, 2017, Pages 145-154]
Optimization Optimization of an ecofriendly coating containing chitosan and gelatin as corrosion inhibitor of carbon steel grade E by Response Surface Method [Volume 5, Issue 1, 2019, Pages 23-31]
Oxazolone A novel application of Co₃O₄@SiO₂ nanocomposite as an efficient and robust catalyst for the preparation of some imidazolone derivatives [Volume 4, Issue 2, 2018, Pages 111-117]

P

Particle Flow Cyclone separator theories to predict performance and flow characteristics [Volume 7, Issue 2, 2021, Pages 83-98]
Particle size A new method for the preparation of pure topiramate with a micron particle size [Volume 3, Issue 3, 2017, Pages 169-174]
Particles parameters Energy Modeling and Simulation including particle technologies within Single and Double Pass Solar Air Heaters [Volume 2, Issue 2, 2016, Pages 95-102]
Particle swarm Optimization Modeling heat transfer of non-Newtonian nanofluids using hybrid ANN-Metaheuristic optimization algorithm [Volume 3, Issue 4, 2017, Pages 233-241]
Particulate pollution Assessment of an atmospheric heavy metal from a transport pool within the Ilorin Metropolis, Nigeria [Volume 7, Issue 1, 2021, Pages 11-21]
PbO2 Synthesis and Statistical Analysis of Changing Size of Nano-structured PbO2 during Mechanical Milling Using Taguchi Methodology [Volume 2, Issue 1, 2016, Pages 49-54]
Pervaporation CFD simulation of pervaporation of organic aqueous mixture through silicalite nano-pore zeolite membrane [Volume 3, Issue 3, 2017, Pages 121-132]
Petrochemical wastewater Petrochemical wastewater treatment by modified electro-Fenton process with nano iron particles [Volume 1, Issue 4, 2015, Pages 215-223]
Pharmaceutical industry Activated pharmaceutical ingredients produced by microreactors versus batch processes: A review [Volume 8, Issue 2, 2022, Pages 63-78]
Photocatalyst Improvement in photocatalysts and photocatalytic reactors for water and wastewater treatment: A review [Volume 2, Issue 3, 2016, Pages 119-140]
Photocatalyst Photocatalytic degradation of methyl orange using TiO₂:Mg²⁺/zeolite composite under visible light irradiation [Volume 6, Issue 1, 2020, Pages 1-12]
Photocatalytic degradation Synthesis, structural characterization and catalytic activity of TiO2/Al2O3 photo-composite [Volume 1, Issue 1, 2015, Pages 31-38]
Photocatalytic degradation Enhanced photocatalytic degradation of 2,4-dichlorophenol in water solution using Sr-doped ZnAl₂O₄ nanoparticles [Volume 4, Issue 2, 2018, Pages 101-109]
P/M Lubricants Experimental Investigation of Metal Powder Compaction without Using Lubricant [Volume 2, Issue 3, 2016, Pages 141-149]
Pollutants Reduction Experimental evaluation of a dual-function solution for reducing flue gas pollutants using low-temperature counter-diffusive combustion of methane with Au_0.06-Pd_0.06/Al₂O₃ Catalyst [Volume 10, Issue 1, 2024, Pages 41-49]
Polyacrylamide Study of different methods to induce crosslinking of polyacrylamide for agriculture process [Volume 5, Issue 1, 2019, Pages 1-11]
Polyacrylamide gel Synthesis, characterization, and magnetic properties of NiFe₂O₄ nanoparticles [Volume 8, Issue 2, 2022, Pages 79-85]
Polyamide 6 Synthesis of Polyamide 6 by Anionic Polymerization of ε-Caprolactam in an Internal Mixer: Effect of Polymerization Reaction Time [Volume 1, Issue 2, 2015, Pages 91-98]
Polyamide 6 The effect of nanoclay on the creation of clusters of polyamide 6 microfibrils [Volume 8, Issue 1, 2022, Pages 25-37]
Polyurethanes Investigating the effects of chemical modification of clay nanoparticles on thermal degradation and mechanical properties of TPU/nanoclay composites [Volume 1, Issue 1, 2015, Pages 1-11]
Polyvinylpyrrolidone Synthesis and structural properties of Polyvinylpyrrolidone based nanocomposite hydrogels for isoniazid drug delivery [Volume 1, Issue 3, 2015, Pages 183-193]
Porosity Numerical simulation of effect of non-spherical particle shape and bed size on hydrodynamics of packed beds [Volume 3, Issue 3, 2017, Pages 133-143]
Porous cerium oxide powder Combustion synthesis of sponge-like CeO₂ powder for selective determination of uric acid in biological fluids [Volume 7, Issue 2, 2021, Pages 73-82]
Positron annihilation lifetime spectroscopy On the positron annihilation spectroscopy and tensile behavior of COOH-MWCNT/epoxy nanocomposites [Volume 10, Issue 1, 2024, Pages 51-57]
Powder Compaction Experimental Investigation of Metal Powder Compaction without Using Lubricant [Volume 2, Issue 3, 2016, Pages 141-149]
PP/PET/SEBS Effective Parameters on the Phase Morphology and Mechanical Properties of PP/PET/SEBS Ternary Polymer Blends [Volume 1, Issue 1, 2015, Pages 39-48]
Pressure drop Numerical simulation of effect of non-spherical particle shape and bed size on hydrodynamics of packed beds [Volume 3, Issue 3, 2017, Pages 133-143]
Pressure drop Cyclone separator theories to predict performance and flow characteristics [Volume 7, Issue 2, 2021, Pages 83-98]
Processing Barite processing for industrial use – A bibliographic survey [Volume 10, Issue 1, 2024, Pages 19-32]
Processing Technologies for processing of barite: A Conceptual review for use in Nigeria [(Articles in Press)]
Progressively censoring Modeling of splat particle splashing data during thermal spraying with the Burr distribution [Volume 3, Issue 1, 2017, Pages 41-50]
Proton conductivity Modified CNTs/Nafion composite: The role of sulfonate groups on the performance of prepared proton exchange methanol fuel cell’s membrane [Volume 3, Issue 4, 2017, Pages 211-218]
PSD FCC catalyst attrition behavior at high temperatures [Volume 5, Issue 4, 2019, Pages 135-143]
Pyrite sulphur removal Ash and sulphur removal from bitumen using column flotation technique: Experimental and response surface methodology modeling [Volume 2, Issue 1, 2016, Pages 1-13]

Q

Quinazolinone Green preparation of tetrahydrobenzimidazo[2,1-b]quinazolin-1(2H)-ones using γ-Fe₂O₃@KSF as novel and recyclable magnetic catalyst [Volume 5, Issue 4, 2019, Pages 179-186]

R

Radar absorbing materials Investigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite [Volume 1, Issue 2, 2015, Pages 85-90]
Radiation attenuation, Dispersion rheology, Mtallic compounds, Radiology, X-ray On study of X-ray absorption and properties of dispersion of W, MoS₂ and B₄C particles in high density polyethylene [Volume 3, Issue 1, 2017, Pages 13-24]
Rare earth roll magnetic separation Preliminary study on upgrading silica sand from the Elwadi Elgedid, Western Desert, Egypt for compatibility with various industrial applications [Volume 7, Issue 2, 2021, Pages 107-117]
Reaction time Synthesis of Polyamide 6 by Anionic Polymerization of ε-Caprolactam in an Internal Mixer: Effect of Polymerization Reaction Time [Volume 1, Issue 2, 2015, Pages 91-98]
Real and imaginary potential Approximation and analytical study of the relativistic confined two particles state within the complex potential in the isotropic medium [Volume 9, Issue 2, 2023, Pages 85-101]
Receiver Enhancement in energy and exergy efficiency of a solar receiver using suspended alumina nanparticles (nanofluid) as heat transfer fluid [Volume 1, Issue 2, 2015, Pages 73-83]
Redox cyclability Effects of Fe₂O₃ addition and mechanical activation on thermochemical heat storage properties of the Co₃O₄/CoO system [Volume 4, Issue 1, 2018, Pages 13-22]
Reduction Theoretical thermodynamics and practical kinetics studies of oxygen desorption from Co₃O₄-5 wt% Al₂O₃ and Co₃O₄-5 wt% Y₂O₃ composites [Volume 5, Issue 1, 2019, Pages 13-21]
Reflux route ZnS/ZnO heterostructure semiconductor: A promising ionic liquid media approach without calcination [Volume 8, Issue 2, 2022, Pages 115-119]
Relativistic correction Exciton properties in 2D-Xenes nanomaterials within quantum field approaches [Volume 7, Issue 2, 2021, Pages 59-71]
Removal Investigation of phosphate adsorption from aqueous media using synthetic mordenite and modified natural clinoptilolite zeolite adsorbents: characteristics, kinetics, and isotherms [Volume 7, Issue 2, 2021, Pages 119-130]
Removal of cadmium Analysis of effective parameters on cadmium cementation reaction from the perspective of diffusion [Volume 6, Issue 2, 2020, Pages 81-93]
Removal of heavy metals Heavy metal removal using SnO₂ nanoparticles prepared in a grape extract media [Volume 9, Issue 2, 2023, Pages 51-61]
Response surface methodology Ash and sulphur removal from bitumen using column flotation technique: Experimental and response surface methodology modeling [Volume 2, Issue 1, 2016, Pages 1-13]
Response surface methodology Application of response surface methodology for thorium(IV) removal using Amberlite IR-120 and IRA-400: Ion exchange equilibrium and kinetics [Volume 3, Issue 2, 2017, Pages 101-112]
Ring stiffness Composite processing and study of properties for polypropylene EPD60R/modified nanoclay Cloisite^® 15A [Volume 5, Issue 2, 2019, Pages 101-108]
RO brine Fabrication and optimization of superhydrophobic ZnO-SA/PVC/PVP nanocomposite membrane distillation for highly saline RO brine recovery [Volume 9, Issue 2, 2023, Pages 103-113]
Root aqueous extract A green approach for the synthesis of silver nanoparticles using Lithospermum officinale root extract and evaluation of their antioxidant activity [Volume 3, Issue 4, 2017, Pages 187-195]
RSM FCC catalyst attrition behavior at high temperatures [Volume 5, Issue 4, 2019, Pages 135-143]
Rule of mixtures Investigation of Mechanical Properties Prediction of Synthesized Nylon-66/Nano-Calcium Carbonate Composites [Volume 1, Issue 4, 2015, Pages 241-251]
Rytova–Keldysh potential Exciton properties in 2D-Xenes nanomaterials within quantum field approaches [Volume 7, Issue 2, 2021, Pages 59-71]

S

Schrödinger equation Theoretical study of quantum and thermal properties of particles’ bound state in quantum disks [Volume 9, Issue 1, 2023, Pages 19-27]
Schrödinger equation Approximation and analytical study of the relativistic confined two particles state within the complex potential in the isotropic medium [Volume 9, Issue 2, 2023, Pages 85-101]
Separation and sorting The effects of suspending medium on dielectrophoretic systems for separating and sorting carbon nanotubes [Volume 5, Issue 4, 2019, Pages 123-134]
Shockwave Numerical investigation of the effect of different parameters on emitted shockwave from bubble collapse in a nozzle [Volume 6, Issue 2, 2020, Pages 67-80]
Shrinkage Effect of process parameters on quality properties and drying time of hawthorn in a vibro-fluidized bed dryer [Volume 3, Issue 1, 2017, Pages 51-62]
Silicalite CFD simulation of pervaporation of organic aqueous mixture through silicalite nano-pore zeolite membrane [Volume 3, Issue 3, 2017, Pages 121-132]
Silica sand Preliminary study on upgrading silica sand from the Elwadi Elgedid, Western Desert, Egypt for compatibility with various industrial applications [Volume 7, Issue 2, 2021, Pages 107-117]
Siliceous manganese ore The effect of microwave radiation on grinding kinetics by selection function and breakage function - A case study of low-grade siliceous manganese ores [Volume 4, Issue 1, 2018, Pages 39-47]
Silk Gamma irradiation induced surface modification of silk fabrics for antibacterial application [Volume 3, Issue 2, 2017, Pages 71-77]
Silo Effects of local vibration on silo discharge and jamming: Employing an experimental approach [Volume 4, Issue 2, 2018, Pages 91-100]
Silver nanoparticles A green approach for the synthesis of silver nanoparticles using Lithospermum officinale root extract and evaluation of their antioxidant activity [Volume 3, Issue 4, 2017, Pages 187-195]
Silver nanoparticles Interpreting the effect of operating variable, seed, and impurity on the induction time of silver nanoparticles precipitation by cluster coagulation models [Volume 4, Issue 2, 2018, Pages 81-90]
Silylation Surface decorated magnetite nanoparticles with birhodanine and MoO₂Cl₂(dmf)₂ as a new magnetic catalyst for epoxidation of olefins [Volume 5, Issue 1, 2019, Pages 47-60]
Sintering Effects of Fe₂O₃ addition and mechanical activation on thermochemical heat storage properties of the Co₃O₄/CoO system [Volume 4, Issue 1, 2018, Pages 13-22]
Size Distribution Evaluation of the effect of granulation processing parameters on the granule properties: Lactose- Cornstarch case study [Volume 1, Issue 3, 2015, Pages 171-182]
SnO₂ Heavy metal removal using SnO₂ nanoparticles prepared in a grape extract media [Volume 9, Issue 2, 2023, Pages 51-61]
Sol-gel A sol-gel based method for preparation of Ni/La-Al2O3 as a new catalyst for dechlorination of monochlorobenzene [Volume 1, Issue 2, 2015, Pages 113-120]
Solubility A new method for the preparation of pure topiramate with a micron particle size [Volume 3, Issue 3, 2017, Pages 169-174]
Solubility A new method for the preparation of pure acamprosate calcium with a micron particle size [Volume 8, Issue 1, 2022, Pages 17-23]
Solution combustion synthesis Preparation of pure cordierite through heat treatment of combustion synthesized magnesium aluminate spinel and silica nanoparticles [Volume 9, Issue 1, 2023, Pages 11-18]
Solvent-free One-Pot solvent-free synthesis of Highly Substituted Imidazoles catalyzed by zeolite [Volume 1, Issue 4, 2015, Pages 253-263]
Solvent-free Green preparation of tetrahydrobenzimidazo[2,1-b]quinazolin-1(2H)-ones using γ-Fe₂O₃@KSF as novel and recyclable magnetic catalyst [Volume 5, Issue 4, 2019, Pages 179-186]
Solventless modification Iranian natural zeolite particle modification: Green synthesis, characterization, and oil spill remediation [Volume 5, Issue 2, 2019, Pages 77-90]
Solvothermal A new precursor for preparation of magnetite (Fe₃O₄) nanoparticles [Volume 1, Issue 2, 2015, Pages 65-72]
Solvothermal Investigation of phosphate adsorption from aqueous media using synthetic mordenite and modified natural clinoptilolite zeolite adsorbents: characteristics, kinetics, and isotherms [Volume 7, Issue 2, 2021, Pages 119-130]
Sonochemical method Synthesis of pure monoclinic zirconia nanoparticles using ultrasound cavitation technique [Volume 2, Issue 2, 2016, Pages 69-77]
Sorption capacity Investigation of phosphate adsorption from aqueous media using synthetic mordenite and modified natural clinoptilolite zeolite adsorbents: characteristics, kinetics, and isotherms [Volume 7, Issue 2, 2021, Pages 119-130]
Specific gravity Technologies for processing of barite: A Conceptual review for use in Nigeria [(Articles in Press)]
Specific rate of breakage The effect of microwave radiation on grinding kinetics by selection function and breakage function - A case study of low-grade siliceous manganese ores [Volume 4, Issue 1, 2018, Pages 39-47]
Spherical Flame Effect of Radiation Heat Loss and Ventilation on Dust Explosions in Spherical Vessels [Volume 1, Issue 1, 2015, Pages 57-64]
Spherical Flame Effect of the temperature difference between gas and organic dust on propagating spherical flames [Volume 2, Issue 3, 2016, Pages 151-161]
Splashing Modeling of splat particle splashing data during thermal spraying with the Burr distribution [Volume 3, Issue 1, 2017, Pages 41-50]
Spouted bed dryer Drying of calcium carbonate in a batch spouted bed dryer: optimization and kinetics modeling [Volume 3, Issue 2, 2017, Pages 89-99]
Spray pyrolysis Effect of Sn Doping on Structural and Optical Properties of 2D α-MoO3 Nanostructures [Volume 2, Issue 2, 2016, Pages 87-93]
Spray pyrolysis A spray pyrolysis method for fabrication of superhydrophobic copper substrate based on modified-alumina powder by fatty acid [Volume 6, Issue 1, 2020, Pages 25-36]
Sr-Doped ZnAl₂O₄ nanoparticles Enhanced photocatalytic degradation of 2,4-dichlorophenol in water solution using Sr-doped ZnAl₂O₄ nanoparticles [Volume 4, Issue 2, 2018, Pages 101-109]
Stagnation-point flow MHD Three-Dimensional Stagnation-Point Flow and Heat Transfer of a Nanofluid over a Stretching Sheet [Volume 1, Issue 3, 2015, Pages 141-151]
Stagnation-point flow Effects of Brownian motion and Thermophoresis on MHD Mixed Convection Stagnation-point Flow of a Nanofluid Toward a Stretching Vertical Sheet in Porous Medium [Volume 1, Issue 4, 2015, Pages 225-240]
Steel particle Mechanical behavior of magnesium-steel particles composites with interpenetrating phases [Volume 9, Issue 1, 2023, Pages 29-34]
Stern-Volmer equation Luminescence quenching studies of [Ru(dMeObpy)₃]²⁺ complex using the quinone derivative-effect of micelles [Volume 9, Issue 1, 2023, Pages 35-42]
Stirred media mill Grinding-aid effect on the colour properties (Ry, whiteness and yellowness) of calcite in stirred media milling [Volume 2, Issue 1, 2016, Pages 23-29]
Strength Mechanical behavior of magnesium-steel particles composites with interpenetrating phases [Volume 9, Issue 1, 2023, Pages 29-34]
Stretching plate MHD Three-Dimensional Stagnation-Point Flow and Heat Transfer of a Nanofluid over a Stretching Sheet [Volume 1, Issue 3, 2015, Pages 141-151]
Stretching vertical plate Effects of Brownian motion and Thermophoresis on MHD Mixed Convection Stagnation-point Flow of a Nanofluid Toward a Stretching Vertical Sheet in Porous Medium [Volume 1, Issue 4, 2015, Pages 225-240]
Sturmian function Theoretical study of quantum and thermal properties of particles’ bound state in quantum disks [Volume 9, Issue 1, 2023, Pages 19-27]
Subharmonic threshold A modified Marmottant model to study the effects of a shell rupture on the subharmonic threshold of encapsulated microbubbles [Volume 7, Issue 1, 2021, Pages 41-50]
Sulfathiazole Application of CdO nanocatalyst in the acetylation of benzyl alcohols and degradation of sulfathiazole as a green approach [Volume 4, Issue 1, 2018, Pages 49-57]
Sulfonate Modified CNTs Modified CNTs/Nafion composite: The role of sulfonate groups on the performance of prepared proton exchange methanol fuel cell’s membrane [Volume 3, Issue 4, 2017, Pages 211-218]
Superhydrophobic A spray pyrolysis method for fabrication of superhydrophobic copper substrate based on modified-alumina powder by fatty acid [Volume 6, Issue 1, 2020, Pages 25-36]
Surface functionalization Effect of surface-functionalization of Na⁺-montmorillonite nanoclay using 3-aminopropyltrimethoxy silane on the mechanical properties of E-glass chopped strand mat/epoxy composites [Volume 4, Issue 2, 2018, Pages 59-65]
Surface modification Gamma irradiation induced surface modification of silk fabrics for antibacterial application [Volume 3, Issue 2, 2017, Pages 71-77]
Surfactant Synthesis and characterization of Polyaniline Nanocomposite by Using Several Types of Surfactants in Aqueous Media [Volume 1, Issue 3, 2015, Pages 163-170]
Surfactant Luminescence quenching studies of [Ru(dMeObpy)₃]²⁺ complex using the quinone derivative-effect of micelles [Volume 9, Issue 1, 2023, Pages 35-42]
Surfactant-modified dolomite Removal of crystal violet from aquatic environment by surfactant-modified dolomite [Volume 2, Issue 3, 2016, Pages 173-182]
Suspending medium The effects of suspending medium on dielectrophoretic systems for separating and sorting carbon nanotubes [Volume 5, Issue 4, 2019, Pages 123-134]
Suspension stability Electrophoretic deposition and corrosion behavior study of aluminum coating on AZ91D substrate [Volume 3, Issue 4, 2017, Pages 219-232]
Swelling Synthesis and structural properties of Polyvinylpyrrolidone based nanocomposite hydrogels for isoniazid drug delivery [Volume 1, Issue 3, 2015, Pages 183-193]
Synthesis Synthesis and Statistical Analysis of Changing Size of Nano-structured PbO2 during Mechanical Milling Using Taguchi Methodology [Volume 2, Issue 1, 2016, Pages 49-54]
Synthesis Synthesizing Fe₃O₄, Mn₃O₄ and Mn₃O₄/Fe₃O₄ nanocatalysts using the sol-gel method as new precursors for the degradation of phenol by catalytic ozonation [Volume 8, Issue 1, 2022, Pages 39-51]

T

Taguchi method Evaluation of the effect of granulation processing parameters on the granule properties: Lactose- Cornstarch case study [Volume 1, Issue 3, 2015, Pages 171-182]
Taguchi method Removal of crystal violet from aquatic environment by surfactant-modified dolomite [Volume 2, Issue 3, 2016, Pages 173-182]
Taguchi method Drying of calcium carbonate in a batch spouted bed dryer: optimization and kinetics modeling [Volume 3, Issue 2, 2017, Pages 89-99]
Tautomer The computational study of the tautomerization of Dacarbazine in a biological system: The DFT approach [Volume 6, Issue 1, 2020, Pages 55-60]
Tautomer Theoretical study of the tautomerization of Carmustine in a biological media as an anti-cancer drug [Volume 7, Issue 1, 2021, Pages 51-57]
Temperature Study of different methods to induce crosslinking of polyacrylamide for agriculture process [Volume 5, Issue 1, 2019, Pages 1-11]
Tensile strength Effect of graphene nanoplatelets on the microstructure and mechanical behavior of erbium-modified Al-7.5Si-0.5Mg alloy [Volume 6, Issue 1, 2020, Pages 37-45]
Tensile strength On the positron annihilation spectroscopy and tensile behavior of COOH-MWCNT/epoxy nanocomposites [Volume 10, Issue 1, 2024, Pages 51-57]
Ternary Blend Effective Parameters on the Phase Morphology and Mechanical Properties of PP/PET/SEBS Ternary Polymer Blends [Volume 1, Issue 1, 2015, Pages 39-48]
Tetrasubstituted imidazoles One-Pot solvent-free synthesis of Highly Substituted Imidazoles catalyzed by zeolite [Volume 1, Issue 4, 2015, Pages 253-263]
Thermal Conductivity Fabrication of Zn_1-XCu_XO nanoparticles and investigation of their effect on the thermal conductivity of nanofluids [Volume 8, Issue 2, 2022, Pages 95-102]
Thermal decomposition Synthesis of pure monoclinic zirconia nanoparticles using ultrasound cavitation technique [Volume 2, Issue 2, 2016, Pages 69-77]
Thermal degradation Investigating the effects of chemical modification of clay nanoparticles on thermal degradation and mechanical properties of TPU/nanoclay composites [Volume 1, Issue 1, 2015, Pages 1-11]
Thermal Efficiency Enhancement in energy and exergy efficiency of a solar receiver using suspended alumina nanparticles (nanofluid) as heat transfer fluid [Volume 1, Issue 2, 2015, Pages 73-83]
Thermal Properties Approximation and analytical study of the relativistic confined two particles state within the complex potential in the isotropic medium [Volume 9, Issue 2, 2023, Pages 85-101]
Thermal Spray Modeling of splat particle splashing data during thermal spraying with the Burr distribution [Volume 3, Issue 1, 2017, Pages 41-50]
Thermochemical Effects of Fe₂O₃ addition and mechanical activation on thermochemical heat storage properties of the Co₃O₄/CoO system [Volume 4, Issue 1, 2018, Pages 13-22]
Thin film Microstructure and optical properties of lustre glazes produced on a copper body [Volume 9, Issue 2, 2023, Pages 115-123]
Thin-layer drying An experimental investigation on drying kinetics of calcium carbonate [Volume 1, Issue 3, 2015, Pages 153-162]
Th(IV) Removal Application of response surface methodology for thorium(IV) removal using Amberlite IR-120 and IRA-400: Ion exchange equilibrium and kinetics [Volume 3, Issue 2, 2017, Pages 101-112]
TiO2 Synthesis, structural characterization and catalytic activity of TiO2/Al2O3 photo-composite [Volume 1, Issue 1, 2015, Pages 31-38]
TiO2-Al2O3 nano-composite Synthesis, structural characterization and catalytic activity of TiO2/Al2O3 photo-composite [Volume 1, Issue 1, 2015, Pages 31-38]
TiO₂ Photocatalytic degradation of methyl orange using TiO₂:Mg²⁺/zeolite composite under visible light irradiation [Volume 6, Issue 1, 2020, Pages 1-12]
Tl₂O₃ X-Shaped Thallium oxide nanostructures as a high performance photocatalyst for degradation of Cephalexin [Volume 5, Issue 2, 2019, Pages 117-122]
Topiramate A new method for the preparation of pure topiramate with a micron particle size [Volume 3, Issue 3, 2017, Pages 169-174]
Triangular duct Numerical simulation of nanofluids flow and heat transfer through isosceles triangular channels [Volume 4, Issue 1, 2018, Pages 29-38]
Trisubstituted imidazoles One-Pot solvent-free synthesis of Highly Substituted Imidazoles catalyzed by zeolite [Volume 1, Issue 4, 2015, Pages 253-263]
Triton-X-100 A new method for the preparation of pure acamprosate calcium with a micron particle size [Volume 8, Issue 1, 2022, Pages 17-23]

U

Ultrasonic assisted adsorption Preparation and application of meso-adsorbent NiFe₂O₄ for the ultrasound-enhanced removal of dye pollutant in water and wastewater: A multivariate study [Volume 6, Issue 2, 2020, Pages 103-111]
Ultrasound Effect of ultrasound on the dispersion of kaolinite and sepiolite suspensions with and without sodium silicate [Volume 6, Issue 1, 2020, Pages 47-54]
Upgrading techniques Preliminary study on upgrading silica sand from the Elwadi Elgedid, Western Desert, Egypt for compatibility with various industrial applications [Volume 7, Issue 2, 2021, Pages 107-117]
Uric acid Combustion synthesis of sponge-like CeO₂ powder for selective determination of uric acid in biological fluids [Volume 7, Issue 2, 2021, Pages 73-82]

V

Vibration Effects of local vibration on silo discharge and jamming: Employing an experimental approach [Volume 4, Issue 2, 2018, Pages 91-100]
Vibro-Fluidized Bed Dryer Effect of process parameters on quality properties and drying time of hawthorn in a vibro-fluidized bed dryer [Volume 3, Issue 1, 2017, Pages 51-62]
Viscosity Effect of ion concentration on viscosity, electrical conductivity and deposit weight of doped nano alumina prepared by electrophoretic deposition [Volume 2, Issue 2, 2016, Pages 55-68]
Viscosity Analyzing the effect of gradation on specific gravity and viscosity of barite powder used in excavation mud [Volume 3, Issue 3, 2017, Pages 163-167]
Voltammetric determination Combustion synthesis of sponge-like CeO₂ powder for selective determination of uric acid in biological fluids [Volume 7, Issue 2, 2021, Pages 73-82]
Voriconazole Development and characterization of optimized sustained release voriconazole-loaded chitosan nanoparticles for ocular delivery [Volume 7, Issue 1, 2021, Pages 1-10]

W

Washability analysis Crushing analysis of the industrial cage mill and the laboratory jaw crusher [Volume 3, Issue 3, 2017, Pages 155-161]
Wastewater Synthesis and characterization of Ni-doped CaTiO₃ nano-powders and their potential for the removal of Cd from wastewaters [Volume 8, Issue 1, 2022, Pages 9-16]
Wastewater Application of Fe₃O₄@THAM-CH₂CH₂Cl magnetic nanoparticle as a new adsorbent in ultrasonically assisted removal of Congo red from aqueous solutions [Volume 8, Issue 2, 2022, Pages 103-114]
Wastewater Heavy metal removal using SnO₂ nanoparticles prepared in a grape extract media [Volume 9, Issue 2, 2023, Pages 51-61]
Wastewater treatment Iranian natural zeolite particle modification: Green synthesis, characterization, and oil spill remediation [Volume 5, Issue 2, 2019, Pages 77-90]
Water and wastewater Preparation and application of meso-adsorbent NiFe₂O₄ for the ultrasound-enhanced removal of dye pollutant in water and wastewater: A multivariate study [Volume 6, Issue 2, 2020, Pages 103-111]
Water treatment Equilibrium, kinetic, and thermodynamic applications for methylene blue removal using Buxus sempervirens leaf powder as a powerful low-cost adsorbent [Volume 5, Issue 4, 2019, Pages 161-170]
Water-UDMH separation CFD simulation of pervaporation of organic aqueous mixture through silicalite nano-pore zeolite membrane [Volume 3, Issue 3, 2017, Pages 121-132]
Wear behavior Effect of graphene nanoplatelets on the microstructure and mechanical behavior of erbium-modified Al-7.5Si-0.5Mg alloy [Volume 6, Issue 1, 2020, Pages 37-45]
Wear properties Effect of ZrSiO₄ particles on the wear properties of as-cast Al matrix particulate composites fabricated via various casting routes [Volume 5, Issue 4, 2019, Pages 171-177]
Work index The effect of microwave radiation on grinding kinetics by selection function and breakage function - A case study of low-grade siliceous manganese ores [Volume 4, Issue 1, 2018, Pages 39-47]

X

Xe and Kr Xenon and krypton separation in a chromatographic column packed with granulated nano NaY zeolite [Volume 1, Issue 1, 2015, Pages 49-55]

Y

Yttrium-nickel ferrite Structural and magnetic properties of chemically synthesized yttrium-substituted nickel nanoferrite [Volume 8, Issue 2, 2022, Pages 87-94]

Z

Zeolite One-Pot solvent-free synthesis of Highly Substituted Imidazoles catalyzed by zeolite [Volume 1, Issue 4, 2015, Pages 253-263]
Zeolite Photocatalytic degradation of methyl orange using TiO₂:Mg²⁺/zeolite composite under visible light irradiation [Volume 6, Issue 1, 2020, Pages 1-12]
Zeolite Membrane CFD simulation of pervaporation of organic aqueous mixture through silicalite nano-pore zeolite membrane [Volume 3, Issue 3, 2017, Pages 121-132]
Zeolite particles Removal of Heavy Metal Particles by LTJ, ANA, SVR, BEC and MER zeolites particles: A Molecular Dynamics Simulation Study [Volume 1, Issue 2, 2015, Pages 99-111]
Zeta potential Effect of ultrasound on the dispersion of kaolinite and sepiolite suspensions with and without sodium silicate [Volume 6, Issue 1, 2020, Pages 47-54]
Zinc sulfate solution Analysis of effective parameters on cadmium cementation reaction from the perspective of diffusion [Volume 6, Issue 2, 2020, Pages 81-93]
Zirconia nanoparticles Synthesis of pure monoclinic zirconia nanoparticles using ultrasound cavitation technique [Volume 2, Issue 2, 2016, Pages 69-77]
Zn(II) complex Ultrasonic synthesis of Zn(II) methionine and ZnO nanostructures as a new precursor for ZnO nanoparticles and in-vitro study [Volume 5, Issue 2, 2019, Pages 109-116]
Zn₂SnO₄ nanoparticles Zn₂SnO₄ nanostructure as an efficient catalyst for the preparation of pyrano[3,2-c]chromene and pyrano[4,3-b]pyran derivatives under ultrasonic irradiation conditions [Volume 5, Issue 1, 2019, Pages 61-69]
ZnS/ZnO heterostructure ZnS/ZnO heterostructure semiconductor: A promising ionic liquid media approach without calcination [Volume 8, Issue 2, 2022, Pages 115-119]
Zr(IV) complex Synthesis of pure monoclinic zirconia nanoparticles using ultrasound cavitation technique [Volume 2, Issue 2, 2016, Pages 69-77]
ZrSiO₄ Effect of ZrSiO₄ particles on the wear properties of as-cast Al matrix particulate composites fabricated via various casting routes [Volume 5, Issue 4, 2019, Pages 171-177]