Keyword Index

A

  • A356-SiCp composite Optimization of SiC particle distribution during compocasting of A356-SiCp composites using D-optimal experiment design [Volume 3, Issue 3, 2017, Pages 145-154]
  • Acamprosate calcium A new method for the preparation of pure acamprosate calcium with a micron particle size [Volume 8, Issue 1, 2022, Pages 17-23]
  • Acetylation Application of CdO nanocatalyst in the acetylation of benzyl alcohols and degradation of sulfathiazole as a green approach [Volume 4, Issue 1, 2018, Pages 49-57]
  • Activation energy Kinetic Modeling of the High Temperature Water Gas Shift Reaction on a Novel Fe-Cr Nanocatalyst by Using Various Kinetic Mechanisms [Volume 1, Issue 1, 2015, Pages 13-19]
  • Activation energy Effects of Temperature and Particle Size Distribution on Barite Reduction by Carbon monoxide Gas [Volume 2, Issue 2, 2016, Pages 79-85]
  • Activation energy Theoretical thermodynamics and practical kinetics studies of oxygen desorption from Co3O4-5 wt% Al2O3 and Co3O4-5 wt% Y2O3 composites [Volume 5, Issue 1, 2019, Pages 13-21]
  • Additives Investigation of Mechanical Properties Prediction of Synthesized Nylon-66/Nano-Calcium Carbonate Composites [Volume 1, Issue 4, 2015, Pages 241-251]
  • Adsorbent Investigation of phosphate adsorption from aqueous media using synthetic mordenite and modified natural clinoptilolite zeolite adsorbents: characteristics, kinetics, and isotherms [Volume 7, Issue 2, 2021, Pages 119-130]
  • Adsorption Removal of crystal violet from aquatic environment by surfactant-modified dolomite [Volume 2, Issue 3, 2016, Pages 173-182]
  • Adsorption A comparative study of malachite green removal from an aqueous solution using raw and chemically modified expanded perlite [Volume 3, Issue 2, 2017, Pages 79-87]
  • Adsorption Adsorption of CO2 and SO2 on multi-walled carbon nanotubes: experimental data and modeling using artificial neural network [Volume 5, Issue 1, 2019, Pages 33-45]
  • Adsorption Iranian natural zeolite particle modification: Green synthesis, characterization, and oil spill remediation [Volume 5, Issue 2, 2019, Pages 77-90]
  • Adsorption Modified bentonite as adsorbent material for the removal of the basic dye methylene blue from aqueous solutions [Volume 7, Issue 1, 2021, Pages 23-31]
  • Al2O3 Synthesis, structural characterization and catalytic activity of TiO2/Al2O3 photo-composite [Volume 1, Issue 1, 2015, Pages 31-38]
  • Al-based composite Effect of ZrSiO4 particles on the wear properties of as-cast Al matrix particulate composites fabricated via various casting routes [Volume 5, Issue 4, 2019, Pages 171-177]
  • Al-Si-Mg alloy Effect of graphene nanoplatelets on the microstructure and mechanical behavior of erbium-modified Al-7.5Si-0.5Mg alloy [Volume 6, Issue 1, 2020, Pages 37-45]
  • Alumina A spray pyrolysis method for fabrication of superhydrophobic copper substrate based on modified-alumina powder by fatty acid [Volume 6, Issue 1, 2020, Pages 25-36]
  • Alumina nanoparticles Enhancement in energy and exergy efficiency of a solar receiver using suspended alumina nanparticles (nanofluid) as heat transfer fluid [Volume 1, Issue 2, 2015, Pages 73-83]
  • Aluminium powder Dynamic modelling of hardness changes of aluminium nanostructure during mechanical ball milling process [Volume 3, Issue 1, 2017, Pages 25-32]
  • Aluminum coating Electrophoretic deposition and corrosion behavior study of aluminum coating on AZ91D substrate [Volume 3, Issue 4, 2017, Pages 219-232]
  • Aluminum-matrix composite Fabrication method, microstructural characteristics, and hardness behavior of an interpenetrating phases hybrid aluminum/alumina-nanodiamond composite [Volume 9, Issue 2, 2023, Pages 63-71]
  • Amino acid nanostructures Ultrasonic synthesis of Zn(II) methionine and ZnO nanostructures as a new precursor for ZnO nanoparticles and in-vitro study [Volume 5, Issue 2, 2019, Pages 109-116]
  • Analytical Method Effect of the temperature difference between gas and organic dust on propagating spherical flames [Volume 2, Issue 3, 2016, Pages 151-161]
  • Anionic Polymerization Synthesis of Polyamide 6 by Anionic Polymerization of ε-Caprolactam in an Internal Mixer: Effect of Polymerization Reaction Time [Volume 1, Issue 2, 2015, Pages 91-98]
  • ANOVA Effect of ion concentration on viscosity, electrical conductivity and deposit weight of doped nano alumina prepared by electrophoretic deposition [Volume 2, Issue 2, 2016, Pages 55-68]
  • Antibacterial activity Gamma irradiation induced surface modification of silk fabrics for antibacterial application [Volume 3, Issue 2, 2017, Pages 71-77]
  • Antibacterial agents Inhibition of Staphylococcus aureus growth in fresh calf minced meat using low density Polyethylene films package promoted by titanium dioxide and zinc oxide nanoparticles [Volume 3, Issue 1, 2017, Pages 1-11]
  • Anti-cancer The computational study of the tautomerization of Dacarbazine in a biological system: The DFT approach [Volume 6, Issue 1, 2020, Pages 55-60]
  • Anti-cancer Theoretical study of the tautomerization of Carmustine in a biological media as an anti-cancer drug [Volume 7, Issue 1, 2021, Pages 51-57]
  • Antioxidant A green approach for the synthesis of silver nanoparticles using Lithospermum officinale root extract and evaluation of their antioxidant activity [Volume 3, Issue 4, 2017, Pages 187-195]
  • Apple pomace polyphenolic extract Maltodextrine nanoparticles loaded with polyphenolic extract from apple industrial waste: preparation, optimization and characterization [Volume 3, Issue 4, 2017, Pages 197-209]
  • Artificial neural network Modeling heat transfer of non-Newtonian nanofluids using hybrid ANN-Metaheuristic optimization algorithm [Volume 3, Issue 4, 2017, Pages 233-241]
  • Artificial neural network Adsorption of CO2 and SO2 on multi-walled carbon nanotubes: experimental data and modeling using artificial neural network [Volume 5, Issue 1, 2019, Pages 33-45]
  • Ash removal Ash and sulphur removal from bitumen using column flotation technique: Experimental and response surface methodology modeling [Volume 2, Issue 1, 2016, Pages 1-13]
  • Attrition FCC catalyst attrition behavior at high temperatures [Volume 5, Issue 4, 2019, Pages 135-143]
  • AZ91D magnesium alloy Electrophoretic deposition and corrosion behavior study of aluminum coating on AZ91D substrate [Volume 3, Issue 4, 2017, Pages 219-232]

B

  • Ball milling Dynamic modelling of hardness changes of aluminium nanostructure during mechanical ball milling process [Volume 3, Issue 1, 2017, Pages 25-32]
  • Barbituric acid Synthesis and characterization of the aminated nano-zeolite: A green heterogeneous nanocatalyst for the synthesis of valuable organic compounds [Volume 8, Issue 1, 2022, Pages 53-62]
  • Barite Effects of Temperature and Particle Size Distribution on Barite Reduction by Carbon monoxide Gas [Volume 2, Issue 2, 2016, Pages 79-85]
  • Barite Analyzing the effect of gradation on specific gravity and viscosity of barite powder used in excavation mud [Volume 3, Issue 3, 2017, Pages 163-167]
  • Barium alginate Optimization of the Ba+2 uptake in the formation process of hydrogels using central composite design: Kinetics and thermodynamic studies of malachite green removal by Ba-alginate particles [Volume 6, Issue 2, 2020, Pages 95-102]
  • Bending performance Enhancement of E-glass fiber/epoxy composite bending performance via graphene addition [Volume 6, Issue 2, 2020, Pages 61-65]
  • Birhodanine Surface decorated magnetite nanoparticles with birhodanine and MoO2Cl2(dmf)2 as a new magnetic catalyst for epoxidation of olefins [Volume 5, Issue 1, 2019, Pages 47-60]
  • Bitumen Rheological properties of modified Bitumen: Comparison of waste polymers’ performance [Volume 1, Issue 4, 2015, Pages 205-213]
  • Bitumen Ash and sulphur removal from bitumen using column flotation technique: Experimental and response surface methodology modeling [Volume 2, Issue 1, 2016, Pages 1-13]
  • Blockage Effects of local vibration on silo discharge and jamming: Employing an experimental approach [Volume 4, Issue 2, 2018, Pages 91-100]
  • Bound state Theoretical study of quantum and thermal properties of particles’ bound state in quantum disks [Volume 9, Issue 1, 2023, Pages 19-27]
  • Boxwood Equilibrium, kinetic, and thermodynamic applications for methylene blue removal using Buxus sempervirens leaf powder as a powerful low-cost adsorbent [Volume 5, Issue 4, 2019, Pages 161-170]
  • Brownian motion Effects of Brownian motion and Thermophoresis on MHD Mixed Convection Stagnation-point Flow of a Nanofluid Toward a Stretching Vertical Sheet in Porous Medium [Volume 1, Issue 4, 2015, Pages 225-240]
  • Brownian motion CFD simulations on natural convection heat transfer of alumina-water nanofluid with Brownian motion effect in a 3-D enclosure [Volume 2, Issue 3, 2016, Pages 163-171]
  • Burr Type XII Modeling of splat particle splashing data during thermal spraying with the Burr distribution [Volume 3, Issue 1, 2017, Pages 41-50]

C

  • Cadmium Oxide Computational study of electronic, spectroscopic, and chemical properties of (CdO)n (n=1-7) nanoclusters as a transparent conducting oxide [Volume 1, Issue 4, 2015, Pages 195-204]
  • Cage mill Crushing analysis of the industrial cage mill and the laboratory jaw crusher [Volume 3, Issue 3, 2017, Pages 155-161]
  • Calcium carbonate An experimental investigation on drying kinetics of calcium carbonate [Volume 1, Issue 3, 2015, Pages 153-162]
  • Carbon Dioxide Adsorption of CO2 and SO2 on multi-walled carbon nanotubes: experimental data and modeling using artificial neural network [Volume 5, Issue 1, 2019, Pages 33-45]
  • Carbon monoxide Effects of Temperature and Particle Size Distribution on Barite Reduction by Carbon monoxide Gas [Volume 2, Issue 2, 2016, Pages 79-85]
  • Catalyst A novel application of Co3O4@SiO2 nanocomposite as an efficient and robust catalyst for the preparation of some imidazolone derivatives [Volume 4, Issue 2, 2018, Pages 111-117]
  • Catalyst Particle Size Effects of catalyst particle size on methanol dehydration at different temperatures and weight hourly space velocities [Volume 2, Issue 1, 2016, Pages 41-47]
  • Catalytic activity Fe3O4@SiO2/AEPTMS/Fe(OTf)3: An efficient superparamagnetic nanocatalyst for the protecting of alcohols [Volume 9, Issue 1, 2023, Pages 1-9]
  • Catalytic Combustion Geometric parameters effect on the reaction zone of premixed CH4 catalytic combustion in a fibrous porous medium [Volume 8, Issue 1, 2022, Pages 1-7]
  • CaTiO3 Nano-powders Synthesis and characterization of Ni-doped CaTiO3 nano-powders and their potential for the removal of Cd from wastewaters [Volume 8, Issue 1, 2022, Pages 9-16]
  • Cavitation Numerical investigation of the effect of different parameters on emitted shockwave from bubble collapse in a nozzle [Volume 6, Issue 2, 2020, Pages 67-80]
  • CCD Optimization of the Ba+2 uptake in the formation process of hydrogels using central composite design: Kinetics and thermodynamic studies of malachite green removal by Ba-alginate particles [Volume 6, Issue 2, 2020, Pages 95-102]
  • CdO Application of CdO nanocatalyst in the acetylation of benzyl alcohols and degradation of sulfathiazole as a green approach [Volume 4, Issue 1, 2018, Pages 49-57]
  • Cd2+ Removal Synthesis and characterization of Ni-doped CaTiO3 nano-powders and their potential for the removal of Cd from wastewaters [Volume 8, Issue 1, 2022, Pages 9-16]
  • Cellulose The influence of cellulose pulp and cellulose microfibers on the flexural performance of green-engineered cementitious composites [Volume 3, Issue 1, 2017, Pages 33-40]
  • Cement The influence of cellulose pulp and cellulose microfibers on the flexural performance of green-engineered cementitious composites [Volume 3, Issue 1, 2017, Pages 33-40]
  • Censored Data Modeling of splat particle splashing data during thermal spraying with the Burr distribution [Volume 3, Issue 1, 2017, Pages 41-50]
  • Censored Data Point and interval evaluation of nanoparticles censored sample in the spray process [Volume 5, Issue 2, 2019, Pages 91-99]
  • Central Composite Design Application of response surface methodology for thorium(IV) removal using Amberlite IR-120 and IRA-400: Ion exchange equilibrium and kinetics [Volume 3, Issue 2, 2017, Pages 101-112]
  • Central Composite Design Analysis of effective parameters on cadmium cementation reaction from the perspective of diffusion [Volume 6, Issue 2, 2020, Pages 81-93]
  • Cephalexin X-Shaped Thallium oxide nanostructures as a high performance photocatalyst for degradation of Cephalexin [Volume 5, Issue 2, 2019, Pages 117-122]
  • CFD simulation CFD simulations on natural convection heat transfer of alumina-water nanofluid with Brownian motion effect in a 3-D enclosure [Volume 2, Issue 3, 2016, Pages 163-171]
  • CFD simulation CFD simulation of pervaporation of organic aqueous mixture through silicalite nano-pore zeolite membrane [Volume 3, Issue 3, 2017, Pages 121-132]
  • Chemical structure Investigating the effects of chemical modification of clay nanoparticles on thermal degradation and mechanical properties of TPU/nanoclay composites [Volume 1, Issue 1, 2015, Pages 1-11]
  • Chemical structure Synthesis and characterization of Polyaniline Nanocomposite by Using Several Types of Surfactants in Aqueous Media [Volume 1, Issue 3, 2015, Pages 163-170]
  • Chitosan Optimization of an ecofriendly coating containing chitosan and gelatin as corrosion inhibitor of carbon steel grade E by Response Surface Method [Volume 5, Issue 1, 2019, Pages 23-31]
  • Classical and Bayesian prediction, Generalized inverted exponential model Point and interval evaluation of nanoparticles censored sample in the spray process [Volume 5, Issue 2, 2019, Pages 91-99]
  • Clinoptilolite Synthesis and characterization of the aminated nano-zeolite: A green heterogeneous nanocatalyst for the synthesis of valuable organic compounds [Volume 8, Issue 1, 2022, Pages 53-62]
  • Cluster coagulation model Interpreting the effect of operating variable, seed, and impurity on the induction time of silver nanoparticles precipitation by cluster coagulation models [Volume 4, Issue 2, 2018, Pages 81-90]
  • Clusters The effect of nanoclay on the creation of clusters of polyamide 6 microfibrils [Volume 8, Issue 1, 2022, Pages 25-37]
  • CO2 reduction Preparation of Gd2O3 nanoparticles from a new precursor and their catalytic activity for electrochemical reduction of CO2 to CO [Volume 1, Issue 1, 2015, Pages 21-30]
  • Coal Dust Effect of Radiation Heat Loss and Ventilation on Dust Explosions in Spherical Vessels [Volume 1, Issue 1, 2015, Pages 57-64]
  • Coal Dust Effect of the temperature difference between gas and organic dust on propagating spherical flames [Volume 2, Issue 3, 2016, Pages 151-161]
  • Coated carbon fiber Investigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite [Volume 1, Issue 2, 2015, Pages 85-90]
  • Coating morphology Electrophoretic deposition and corrosion behavior study of aluminum coating on AZ91D substrate [Volume 3, Issue 4, 2017, Pages 219-232]
  • Cobalt oxide Effects of Fe2O3 addition and mechanical activation on thermochemical heat storage properties of the Co3O4/CoO system [Volume 4, Issue 1, 2018, Pages 13-22]
  • Cobalt oxide Theoretical thermodynamics and practical kinetics studies of oxygen desorption from Co3O4-5 wt% Al2O3 and Co3O4-5 wt% Y2O3 composites [Volume 5, Issue 1, 2019, Pages 13-21]
  • COD Petrochemical wastewater treatment by modified electro-Fenton process with nano iron particles [Volume 1, Issue 4, 2015, Pages 215-223]
  • Collection efficiency Cyclone separator theories to predict performance and flow characteristics [Volume 7, Issue 2, 2021, Pages 83-98]
  • Column Flotation process Ash and sulphur removal from bitumen using column flotation technique: Experimental and response surface methodology modeling [Volume 2, Issue 1, 2016, Pages 1-13]
  • Combined MD/RO systems Fabrication and optimization of superhydrophobic ZnO-SA/PVC/PVP nanocomposite membrane distillation for highly saline RO brine recovery [Volume 9, Issue 2, 2023, Pages 103-113]
  • Combustion Effect of the temperature difference between gas and organic dust on propagating spherical flames [Volume 2, Issue 3, 2016, Pages 151-161]
  • Combustion synthesis Single-stage solution combustion preparation of ZnFe2O4-ZnS nanoparticles as dye adsorbent: Effect of fuel to oxidant and Zn to Fe molar ratios [Volume 6, Issue 2, 2020, Pages 113-122]
  • Comminution Crushing analysis of the industrial cage mill and the laboratory jaw crusher [Volume 3, Issue 3, 2017, Pages 155-161]
  • Compocasting Optimization of SiC particle distribution during compocasting of A356-SiCp composites using D-optimal experiment design [Volume 3, Issue 3, 2017, Pages 145-154]
  • Composites Investigation of Mechanical Properties Prediction of Synthesized Nylon-66/Nano-Calcium Carbonate Composites [Volume 1, Issue 4, 2015, Pages 241-251]
  • Conductive polymer Synthesis and characterization of Polyaniline Nanocomposite by Using Several Types of Surfactants in Aqueous Media [Volume 1, Issue 3, 2015, Pages 163-170]
  • Congo red Application of Fe3O4@THAM-CH2CH2Cl magnetic nanoparticle as a new adsorbent in ultrasonically assisted removal of Congo red from aqueous solutions [Volume 8, Issue 2, 2022, Pages 103-114]
  • Connectivity Mechanical behavior of magnesium-steel particles composites with interpenetrating phases [Volume 9, Issue 1, 2023, Pages 29-34]
  • Controlled release Synthesis and structural properties of Polyvinylpyrrolidone based nanocomposite hydrogels for isoniazid drug delivery [Volume 1, Issue 3, 2015, Pages 183-193]
  • Copper Evaluation of breakage and coalescence kernel constants for a mixer tank in the copper solvent extraction unit [Volume 6, Issue 1, 2020, Pages 13-23]
  • Copper A spray pyrolysis method for fabrication of superhydrophobic copper substrate based on modified-alumina powder by fatty acid [Volume 6, Issue 1, 2020, Pages 25-36]
  • Co-precipitation method X-Shaped Thallium oxide nanostructures as a high performance photocatalyst for degradation of Cephalexin [Volume 5, Issue 2, 2019, Pages 117-122]
  • Cordierite Preparation of pure cordierite through heat treatment of combustion synthesized magnesium aluminate spinel and silica nanoparticles [Volume 9, Issue 1, 2023, Pages 11-18]
  • Core-shell magnetic solid acid Fe3O4@SiO2–SO3H Nanoparticles: An efficient magnetically retrievable catalyst for esterification reactions [Volume 4, Issue 2, 2018, Pages 67-79]
  • Cornea Development and characterization of optimized sustained release voriconazole-loaded chitosan nanoparticles for ocular delivery [Volume 7, Issue 1, 2021, Pages 1-10]
  • Corrosion Talinum triangulare leaf and Musa sapientum peel extracts as corrosion inhibitors on ZA-27 Alloy [Volume 4, Issue 1, 2018, Pages 23-28]
  • Co3O4@SiO2 A novel application of Co3O4@SiO2 nanocomposite as an efficient and robust catalyst for the preparation of some imidazolone derivatives [Volume 4, Issue 2, 2018, Pages 111-117]
  • Coupled states Exciton properties in 2D-Xenes nanomaterials within quantum field approaches [Volume 7, Issue 2, 2021, Pages 59-71]
  • Crystal structure Effect of Sn Doping on Structural and Optical Properties of 2D α-MoO3 Nanostructures [Volume 2, Issue 2, 2016, Pages 87-93]
  • Crystal violet (CV+) Removal of crystal violet from aquatic environment by surfactant-modified dolomite [Volume 2, Issue 3, 2016, Pages 173-182]
  • Cyclic voltammetry Preparation of Gd2O3 nanoparticles from a new precursor and their catalytic activity for electrochemical reduction of CO2 to CO [Volume 1, Issue 1, 2015, Pages 21-30]
  • Cyclone separator theories Cyclone separator theories to predict performance and flow characteristics [Volume 7, Issue 2, 2021, Pages 83-98]

D

  • Dacarbazine The computational study of the tautomerization of Dacarbazine in a biological system: The DFT approach [Volume 6, Issue 1, 2020, Pages 55-60]
  • Dechlorination A sol-gel based method for preparation of Ni/La-Al2O3 as a new catalyst for dechlorination of monochlorobenzene [Volume 1, Issue 2, 2015, Pages 113-120]
  • Degradation Application of CdO nanocatalyst in the acetylation of benzyl alcohols and degradation of sulfathiazole as a green approach [Volume 4, Issue 1, 2018, Pages 49-57]
  • Design of experiment Synthesis and Statistical Analysis of Changing Size of Nano-structured PbO2 during Mechanical Milling Using Taguchi Methodology [Volume 2, Issue 1, 2016, Pages 49-54]
  • DFT Computational study of electronic, spectroscopic, and chemical properties of (CdO)n (n=1-7) nanoclusters as a transparent conducting oxide [Volume 1, Issue 4, 2015, Pages 195-204]
  • DFT The computational study of the tautomerization of Dacarbazine in a biological system: The DFT approach [Volume 6, Issue 1, 2020, Pages 55-60]
  • DFT Theoretical study of the tautomerization of Carmustine in a biological media as an anti-cancer drug [Volume 7, Issue 1, 2021, Pages 51-57]
  • Dielectrophoresis The effects of suspending medium on dielectrophoretic systems for separating and sorting carbon nanotubes [Volume 5, Issue 4, 2019, Pages 123-134]
  • Die Wall Lubrication Experimental Investigation of Metal Powder Compaction without Using Lubricant [Volume 2, Issue 3, 2016, Pages 141-149]
  • Dilatational interfacial viscosity A modified Marmottant model to study the effects of a shell rupture on the subharmonic threshold of encapsulated microbubbles [Volume 7, Issue 1, 2021, Pages 41-50]
  • Discharge Effects of local vibration on silo discharge and jamming: Employing an experimental approach [Volume 4, Issue 2, 2018, Pages 91-100]
  • Distortion potential Theoretical study of quantum and thermal properties of particles’ bound state in quantum disks [Volume 9, Issue 1, 2023, Pages 19-27]
  • Distribution Effect of ZrSiO4 particles on the wear properties of as-cast Al matrix particulate composites fabricated via various casting routes [Volume 5, Issue 4, 2019, Pages 171-177]
  • DME Effects of catalyst particle size on methanol dehydration at different temperatures and weight hourly space velocities [Volume 2, Issue 1, 2016, Pages 41-47]
  • D-optimal design of experiment Optimization of SiC particle distribution during compocasting of A356-SiCp composites using D-optimal experiment design [Volume 3, Issue 3, 2017, Pages 145-154]
  • DOS Computational study of electronic, spectroscopic, and chemical properties of (CdO)n (n=1-7) nanoclusters as a transparent conducting oxide [Volume 1, Issue 4, 2015, Pages 195-204]
  • Drying effective efficiency Drying of calcium carbonate in a batch spouted bed dryer: optimization and kinetics modeling [Volume 3, Issue 2, 2017, Pages 89-99]
  • Drying kinetics Drying of calcium carbonate in a batch spouted bed dryer: optimization and kinetics modeling [Volume 3, Issue 2, 2017, Pages 89-99]
  • Drying rate An experimental investigation on drying kinetics of calcium carbonate [Volume 1, Issue 3, 2015, Pages 153-162]
  • Drying rate Effect of process parameters on quality properties and drying time of hawthorn in a vibro-fluidized bed dryer [Volume 3, Issue 1, 2017, Pages 51-62]
  • Dust Explosion Effect of Radiation Heat Loss and Ventilation on Dust Explosions in Spherical Vessels [Volume 1, Issue 1, 2015, Pages 57-64]
  • Dusty Flame Effect of the temperature difference between gas and organic dust on propagating spherical flames [Volume 2, Issue 3, 2016, Pages 151-161]
  • Dye Equilibrium, kinetic, and thermodynamic applications for methylene blue removal using Buxus sempervirens leaf powder as a powerful low-cost adsorbent [Volume 5, Issue 4, 2019, Pages 161-170]

E

  • EDXRF Assessment of an atmospheric heavy metal from a transport pool within the Ilorin Metropolis, Nigeria [Volume 7, Issue 1, 2021, Pages 11-21]
  • Effective moisture diffusivity An experimental investigation on drying kinetics of calcium carbonate [Volume 1, Issue 3, 2015, Pages 153-162]
  • Efficiency Talinum triangulare leaf and Musa sapientum peel extracts as corrosion inhibitors on ZA-27 Alloy [Volume 4, Issue 1, 2018, Pages 23-28]
  • Elastic Die Deformation Experimental Investigation of Metal Powder Compaction without Using Lubricant [Volume 2, Issue 3, 2016, Pages 141-149]
  • Elastic Spring Back Experimental Investigation of Metal Powder Compaction without Using Lubricant [Volume 2, Issue 3, 2016, Pages 141-149]
  • Electro-deposition Investigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite [Volume 1, Issue 2, 2015, Pages 85-90]
  • Electro-Fenton Petrochemical wastewater treatment by modified electro-Fenton process with nano iron particles [Volume 1, Issue 4, 2015, Pages 215-223]
  • Electronic parameter The computational study of the tautomerization of Dacarbazine in a biological system: The DFT approach [Volume 6, Issue 1, 2020, Pages 55-60]
  • Electronic parameter Theoretical study of the tautomerization of Carmustine in a biological media as an anti-cancer drug [Volume 7, Issue 1, 2021, Pages 51-57]
  • Electrophoretic deposition Effect of ion concentration on viscosity, electrical conductivity and deposit weight of doped nano alumina prepared by electrophoretic deposition [Volume 2, Issue 2, 2016, Pages 55-68]
  • Electrophoretic deposition Electrophoretic deposition and corrosion behavior study of aluminum coating on AZ91D substrate [Volume 3, Issue 4, 2017, Pages 219-232]
  • Elwadi Elgedid Preliminary study on upgrading silica sand from the Elwadi Elgedid, Western Desert, Egypt for compatibility with various industrial applications [Volume 7, Issue 2, 2021, Pages 107-117]
  • Empirical correlation An experimental investigation on drying kinetics of calcium carbonate [Volume 1, Issue 3, 2015, Pages 153-162]
  • Enamel glaze Microstructure and Optical Properties of Lustre Glazes Produced on Copper Body [(Articles in Press)]
  • Encapsulated microbubble A modified Marmottant model to study the effects of a shell rupture on the subharmonic threshold of encapsulated microbubbles [Volume 7, Issue 1, 2021, Pages 41-50]
  • Energy modeling Energy Modeling and Simulation including particle technologies within Single and Double Pass Solar Air Heaters [Volume 2, Issue 2, 2016, Pages 95-102]
  • Energy performance Energy Modeling and Simulation including particle technologies within Single and Double Pass Solar Air Heaters [Volume 2, Issue 2, 2016, Pages 95-102]
  • Engineered Cementitious Composite The influence of cellulose pulp and cellulose microfibers on the flexural performance of green-engineered cementitious composites [Volume 3, Issue 1, 2017, Pages 33-40]
  • Epoxy-based composite Effect of surface-functionalization of Na+-montmorillonite nanoclay using 3-aminopropyltrimethoxy silane on the mechanical properties of E-glass chopped strand mat/epoxy composites [Volume 4, Issue 2, 2018, Pages 59-65]
  • Erbium Effect of graphene nanoplatelets on the microstructure and mechanical behavior of erbium-modified Al-7.5Si-0.5Mg alloy [Volume 6, Issue 1, 2020, Pages 37-45]
  • Esterification Fe3O4@ZrO2-SO3H Nanoparticles: A new magnetically retrievable catalyst for esterification of mono- and dicarboxylic acids [Volume 4, Issue 1, 2018, Pages 1-12]
  • Esterification Fe3O4@SiO2–SO3H Nanoparticles: An efficient magnetically retrievable catalyst for esterification reactions [Volume 4, Issue 2, 2018, Pages 67-79]
  • Ethyl pyridinium iodide ZnS/ZnO heterostructure semiconductor: A promising ionic liquid media approach without calcination [Volume 8, Issue 2, 2022, Pages 115-119]
  • Eulerian/Lagrangian approach Numerical investigation of the effect of different parameters on emitted shockwave from bubble collapse in a nozzle [Volume 6, Issue 2, 2020, Pages 67-80]
  • Exergy Efficiency Enhancement in energy and exergy efficiency of a solar receiver using suspended alumina nanparticles (nanofluid) as heat transfer fluid [Volume 1, Issue 2, 2015, Pages 73-83]

F

  • Fatty acid A spray pyrolysis method for fabrication of superhydrophobic copper substrate based on modified-alumina powder by fatty acid [Volume 6, Issue 1, 2020, Pages 25-36]
  • FCC catalyst particles FCC catalyst attrition behavior at high temperatures [Volume 5, Issue 4, 2019, Pages 135-143]
  • Fe3O4 nanoparticles Investigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite [Volume 1, Issue 2, 2015, Pages 85-90]
  • Fe-Cr nanocatalyst Kinetic Modeling of the High Temperature Water Gas Shift Reaction on a Novel Fe-Cr Nanocatalyst by Using Various Kinetic Mechanisms [Volume 1, Issue 1, 2015, Pages 13-19]
  • Fe3O4@THAM-CH2CH2Cl Application of Fe3O4@THAM-CH2CH2Cl magnetic nanoparticle as a new adsorbent in ultrasonically assisted removal of Congo red from aqueous solutions [Volume 8, Issue 2, 2022, Pages 103-114]
  • Fe3O4@ZrO2-supported sulfonic acid Fe3O4@ZrO2-SO3H Nanoparticles: A new magnetically retrievable catalyst for esterification of mono- and dicarboxylic acids [Volume 4, Issue 1, 2018, Pages 1-12]
  • Fiber-reinforced composite Enhancement of E-glass fiber/epoxy composite bending performance via graphene addition [Volume 6, Issue 2, 2020, Pages 61-65]
  • Fibers Diameter Geometric parameters effect on the reaction zone of premixed CH4 catalytic combustion in a fibrous porous medium [Volume 8, Issue 1, 2022, Pages 1-7]
  • Fibers Orientation Geometric parameters effect on the reaction zone of premixed CH4 catalytic combustion in a fibrous porous medium [Volume 8, Issue 1, 2022, Pages 1-7]
  • Fibrous Porous Medium Geometric parameters effect on the reaction zone of premixed CH4 catalytic combustion in a fibrous porous medium [Volume 8, Issue 1, 2022, Pages 1-7]
  • Fischer-Tropsch synthesis Feasibility study on the use of MIL-53(Al) as a support for iron catalysts in the CO hydrogenation reaction [Volume 9, Issue 1, 2023, Pages 43-49]
  • Fixed Bed Reactor Effects of catalyst particle size on methanol dehydration at different temperatures and weight hourly space velocities [Volume 2, Issue 1, 2016, Pages 41-47]
  • Flame Speed Effect of Radiation Heat Loss and Ventilation on Dust Explosions in Spherical Vessels [Volume 1, Issue 1, 2015, Pages 57-64]
  • Flexural behavior The influence of cellulose pulp and cellulose microfibers on the flexural performance of green-engineered cementitious composites [Volume 3, Issue 1, 2017, Pages 33-40]
  • Floating catalyst Predictive modeling of the length of prepared CNT by CVD through ANN-MPSO and GEP [Volume 5, Issue 4, 2019, Pages 145-159]
  • Flowability Evaluation of the effect of granulation processing parameters on the granule properties: Lactose- Cornstarch case study [Volume 1, Issue 3, 2015, Pages 171-182]
  • Flow channeling Numerical simulation of effect of non-spherical particle shape and bed size on hydrodynamics of packed beds [Volume 3, Issue 3, 2017, Pages 133-143]
  • Flow pattern Cyclone separator theories to predict performance and flow characteristics [Volume 7, Issue 2, 2021, Pages 83-98]
  • Fluidized Bed Granulation Evaluation of the effect of granulation processing parameters on the granule properties: Lactose- Cornstarch case study [Volume 1, Issue 3, 2015, Pages 171-182]
  • Forward Osmosis (FO) Thin film nanocomposite forward osmosis membrane prepared by graphene oxide embedded PSf substrate [Volume 2, Issue 2, 2016, Pages 103-117]
  • Fresh minced meat Inhibition of Staphylococcus aureus growth in fresh calf minced meat using low density Polyethylene films package promoted by titanium dioxide and zinc oxide nanoparticles [Volume 3, Issue 1, 2017, Pages 1-11]
  • Fuel Cells Modified CNTs/Nafion composite: The role of sulfonate groups on the performance of prepared proton exchange methanol fuel cell’s membrane [Volume 3, Issue 4, 2017, Pages 211-218]

G

  • Gain ratio Diagnosis of the disease using an ant colony gene selection method based on information gain ratio using fuzzy rough sets [Volume 3, Issue 4, 2017, Pages 175-186]
  • Gamma-ray On study of X-ray absorption and properties of dispersion of W, MoS2 and B4C particles in high density polyethylene [Volume 3, Issue 1, 2017, Pages 13-24]
  • Gas transportation A Review of Manufacturing Process of Polyethylene Pipe and Connectors for Applying in High-Pressure Natural Gas Pipelines [Volume 1, Issue 3, 2015, Pages 129-140]
  • Gd2O3 nanoparticles Preparation of Gd2O3 nanoparticles from a new precursor and their catalytic activity for electrochemical reduction of CO2 to CO [Volume 1, Issue 1, 2015, Pages 21-30]
  • Gd(III) complex Preparation of Gd2O3 nanoparticles from a new precursor and their catalytic activity for electrochemical reduction of CO2 to CO [Volume 1, Issue 1, 2015, Pages 21-30]
  • Gelatin Optimization of an ecofriendly coating containing chitosan and gelatin as corrosion inhibitor of carbon steel grade E by Response Surface Method [Volume 5, Issue 1, 2019, Pages 23-31]
  • Gene expression programming Predictive modeling of the length of prepared CNT by CVD through ANN-MPSO and GEP [Volume 5, Issue 4, 2019, Pages 145-159]
  • Geopolymer concrete The effect of adding nano-silica on the ultrasonic pulse velocity of geopolymer concrete [Volume 7, Issue 2, 2021, Pages 99-105]
  • Granule Mean Size Evaluation of the effect of granulation processing parameters on the granule properties: Lactose- Cornstarch case study [Volume 1, Issue 3, 2015, Pages 171-182]
  • Graphene Effect of graphene nanoplatelets on the microstructure and mechanical behavior of erbium-modified Al-7.5Si-0.5Mg alloy [Volume 6, Issue 1, 2020, Pages 37-45]
  • Graphene nanoplatelets Enhancement of E-glass fiber/epoxy composite bending performance via graphene addition [Volume 6, Issue 2, 2020, Pages 61-65]
  • Graphene Oxide nanoplates Thin film nanocomposite forward osmosis membrane prepared by graphene oxide embedded PSf substrate [Volume 2, Issue 2, 2016, Pages 103-117]
  • Green composite The influence of cellulose pulp and cellulose microfibers on the flexural performance of green-engineered cementitious composites [Volume 3, Issue 1, 2017, Pages 33-40]
  • Green method A green approach for the synthesis of silver nanoparticles using Lithospermum officinale root extract and evaluation of their antioxidant activity [Volume 3, Issue 4, 2017, Pages 187-195]
  • Green nanocatalyst Synthesis and characterization of the aminated nano-zeolite: A green heterogeneous nanocatalyst for the synthesis of valuable organic compounds [Volume 8, Issue 1, 2022, Pages 53-62]
  • Grindability The effect of microwave radiation on grinding kinetics by selection function and breakage function - A case study of low-grade siliceous manganese ores [Volume 4, Issue 1, 2018, Pages 39-47]

H

  • Hardness Fabrication method, microstructural characteristics, and hardness behavior of an interpenetrating phases hybrid aluminum/alumina-nanodiamond composite [Volume 9, Issue 2, 2023, Pages 63-71]
  • Hawthorn Drying Effect of process parameters on quality properties and drying time of hawthorn in a vibro-fluidized bed dryer [Volume 3, Issue 1, 2017, Pages 51-62]
  • Heat storage Effects of Fe2O3 addition and mechanical activation on thermochemical heat storage properties of the Co3O4/CoO system [Volume 4, Issue 1, 2018, Pages 13-22]
  • Heat transfer Energy Modeling and Simulation including particle technologies within Single and Double Pass Solar Air Heaters [Volume 2, Issue 2, 2016, Pages 95-102]
  • Heat transfer Pool boiling heat transfer coefficient of pure liquids using dimensional analysis [Volume 3, Issue 2, 2017, Pages 63-69]
  • Heavy metal ions Removal of Heavy Metal Particles by LTJ, ANA, SVR, BEC and MER zeolites particles: A Molecular Dynamics Simulation Study [Volume 1, Issue 2, 2015, Pages 99-111]
  • High temperature FCC catalyst attrition behavior at high temperatures [Volume 5, Issue 4, 2019, Pages 135-143]
  • Hybrid artificial neural network Predictive modeling of the length of prepared CNT by CVD through ANN-MPSO and GEP [Volume 5, Issue 4, 2019, Pages 145-159]
  • Hydrogel Study of different methods to induce crosslinking of polyacrylamide for agriculture process [Volume 5, Issue 1, 2019, Pages 1-11]
  • Hydrogel nanocomposite Synthesis and structural properties of Polyvinylpyrrolidone based nanocomposite hydrogels for isoniazid drug delivery [Volume 1, Issue 3, 2015, Pages 183-193]
  • Hydrogen Economy Assessment of an atmospheric heavy metal from a transport pool within the Ilorin Metropolis, Nigeria [Volume 7, Issue 1, 2021, Pages 11-21]
  • Hydrophilic Investigation of mass transfer coefficients in irregular packed liquid-liquid extraction columns in the presence of various nanoparticles [Volume 3, Issue 2, 2017, Pages 113-120]
  • Hydrophobic Investigation of mass transfer coefficients in irregular packed liquid-liquid extraction columns in the presence of various nanoparticles [Volume 3, Issue 2, 2017, Pages 113-120]
  • Hydrophobic membrane Fabrication and optimization of superhydrophobic ZnO-SA/PVC/PVP nanocomposite membrane distillation for highly saline RO brine recovery [Volume 9, Issue 2, 2023, Pages 103-113]
  • Hydrophobic modification Iranian natural zeolite particle modification: Green synthesis, characterization, and oil spill remediation [Volume 5, Issue 2, 2019, Pages 77-90]
  • Hydrothermal A new precursor for preparation of magnetite (Fe3O4) nanoparticles [Volume 1, Issue 2, 2015, Pages 65-72]
  • Hydroxy compounds Fe3O4@SiO2/AEPTMS/Fe(OTf)3: An efficient superparamagnetic nanocatalyst for the protecting of alcohols [Volume 9, Issue 1, 2023, Pages 1-9]

I

  • Imidazolone A novel application of Co3O4@SiO2 nanocomposite as an efficient and robust catalyst for the preparation of some imidazolone derivatives [Volume 4, Issue 2, 2018, Pages 111-117]
  • Induction time Interpreting the effect of operating variable, seed, and impurity on the induction time of silver nanoparticles precipitation by cluster coagulation models [Volume 4, Issue 2, 2018, Pages 81-90]
  • Inhibitor Talinum triangulare leaf and Musa sapientum peel extracts as corrosion inhibitors on ZA-27 Alloy [Volume 4, Issue 1, 2018, Pages 23-28]
  • In situ micronization A new method for the preparation of pure acamprosate calcium with a micron particle size [Volume 8, Issue 1, 2022, Pages 17-23]
  • In-Situ Polymerization The effect of nanoclay on the creation of clusters of polyamide 6 microfibrils [Volume 8, Issue 1, 2022, Pages 25-37]
  • Interfacial bonding Effect of surface-functionalization of Na+-montmorillonite nanoclay using 3-aminopropyltrimethoxy silane on the mechanical properties of E-glass chopped strand mat/epoxy composites [Volume 4, Issue 2, 2018, Pages 59-65]
  • Internal Concentration Polarization (ICP) Thin film nanocomposite forward osmosis membrane prepared by graphene oxide embedded PSf substrate [Volume 2, Issue 2, 2016, Pages 103-117]
  • Interpenetrating phases Mechanical behavior of magnesium-steel particles composites with interpenetrating phases [Volume 9, Issue 1, 2023, Pages 29-34]
  • Interpenetrating phases Fabrication method, microstructural characteristics, and hardness behavior of an interpenetrating phases hybrid aluminum/alumina-nanodiamond composite [Volume 9, Issue 2, 2023, Pages 63-71]
  • Ion-exchange Removal of Heavy Metal Particles by LTJ, ANA, SVR, BEC and MER zeolites particles: A Molecular Dynamics Simulation Study [Volume 1, Issue 2, 2015, Pages 99-111]
  • Ion Exchange Resin Application of response surface methodology for thorium(IV) removal using Amberlite IR-120 and IRA-400: Ion exchange equilibrium and kinetics [Volume 3, Issue 2, 2017, Pages 101-112]
  • Ionic gelation Development and characterization of optimized sustained release voriconazole-loaded chitosan nanoparticles for ocular delivery [Volume 7, Issue 1, 2021, Pages 1-10]
  • Ionic liquid A new precursor for preparation of magnetite (Fe3O4) nanoparticles [Volume 1, Issue 2, 2015, Pages 65-72]
  • IR Spectra Computational study of electronic, spectroscopic, and chemical properties of (CdO)n (n=1-7) nanoclusters as a transparent conducting oxide [Volume 1, Issue 4, 2015, Pages 195-204]
  • Isoniazid Synthesis and structural properties of Polyvinylpyrrolidone based nanocomposite hydrogels for isoniazid drug delivery [Volume 1, Issue 3, 2015, Pages 183-193]
  • Isotherm A comparative study of malachite green removal from an aqueous solution using raw and chemically modified expanded perlite [Volume 3, Issue 2, 2017, Pages 79-87]
  • Isotherm Adsorption of CO2 and SO2 on multi-walled carbon nanotubes: experimental data and modeling using artificial neural network [Volume 5, Issue 1, 2019, Pages 33-45]

J

  • Jamming Effects of local vibration on silo discharge and jamming: Employing an experimental approach [Volume 4, Issue 2, 2018, Pages 91-100]
  • Jaw crusher Crushing analysis of the industrial cage mill and the laboratory jaw crusher [Volume 3, Issue 3, 2017, Pages 155-161]

K

  • Keratitis Development and characterization of optimized sustained release voriconazole-loaded chitosan nanoparticles for ocular delivery [Volume 7, Issue 1, 2021, Pages 1-10]
  • Keywords: Process optimization Maltodextrine nanoparticles loaded with polyphenolic extract from apple industrial waste: preparation, optimization and characterization [Volume 3, Issue 4, 2017, Pages 197-209]
  • Kinetic and thermodynamic Heavy metal removal using SnO2 nanoparticles prepared in a grape extract media [Volume 9, Issue 2, 2023, Pages 51-61]
  • Kinetics Removal of crystal violet from aquatic environment by surfactant-modified dolomite [Volume 2, Issue 3, 2016, Pages 173-182]

L

  • LDPE films Inhibition of Staphylococcus aureus growth in fresh calf minced meat using low density Polyethylene films package promoted by titanium dioxide and zinc oxide nanoparticles [Volume 3, Issue 1, 2017, Pages 1-11]
  • Liquid-liquid extraction Investigation of mass transfer coefficients in irregular packed liquid-liquid extraction columns in the presence of various nanoparticles [Volume 3, Issue 2, 2017, Pages 113-120]
  • Lustre glaze Microstructure and Optical Properties of Lustre Glazes Produced on Copper Body [(Articles in Press)]

M

  • Magnesium Mechanical behavior of magnesium-steel particles composites with interpenetrating phases [Volume 9, Issue 1, 2023, Pages 29-34]
  • Magnetic acid catalyst Fe3O4@ZrO2-SO3H Nanoparticles: A new magnetically retrievable catalyst for esterification of mono- and dicarboxylic acids [Volume 4, Issue 1, 2018, Pages 1-12]
  • Magnetic iron oxide Fe3O4@SiO2/AEPTMS/Fe(OTf)3: An efficient superparamagnetic nanocatalyst for the protecting of alcohols [Volume 9, Issue 1, 2023, Pages 1-9]
  • Magnetic Nanoparticles Surface decorated magnetite nanoparticles with birhodanine and MoO2Cl2(dmf)2 as a new magnetic catalyst for epoxidation of olefins [Volume 5, Issue 1, 2019, Pages 47-60]
  • Magnetic properties Synthesis, characterization, and magnetic properties of NiFe2O4 nanoparticles [Volume 8, Issue 2, 2022, Pages 79-85]
  • Magnetite A new precursor for preparation of magnetite (Fe3O4) nanoparticles [Volume 1, Issue 2, 2015, Pages 65-72]
  • Magnetoexciton Exciton properties in 2D-Xenes nanomaterials within quantum field approaches [Volume 7, Issue 2, 2021, Pages 59-71]
  • Malachite green A comparative study of malachite green removal from an aqueous solution using raw and chemically modified expanded perlite [Volume 3, Issue 2, 2017, Pages 79-87]
  • Mass spectrum Exciton properties in 2D-Xenes nanomaterials within quantum field approaches [Volume 7, Issue 2, 2021, Pages 59-71]
  • Mass transfer coefficient Investigation of mass transfer coefficients in irregular packed liquid-liquid extraction columns in the presence of various nanoparticles [Volume 3, Issue 2, 2017, Pages 113-120]
  • Mathematical modelling Effect of process parameters on quality properties and drying time of hawthorn in a vibro-fluidized bed dryer [Volume 3, Issue 1, 2017, Pages 51-62]
  • Maximum diameter Point and interval evaluation of nanoparticles censored sample in the spray process [Volume 5, Issue 2, 2019, Pages 91-99]
  • Mechanical activation Preparation of pure cordierite through heat treatment of combustion synthesized magnesium aluminate spinel and silica nanoparticles [Volume 9, Issue 1, 2023, Pages 11-18]
  • Mechanical milling Synthesis and Statistical Analysis of Changing Size of Nano-structured PbO2 during Mechanical Milling Using Taguchi Methodology [Volume 2, Issue 1, 2016, Pages 49-54]
  • Mechanogrinding Iranian natural zeolite particle modification: Green synthesis, characterization, and oil spill remediation [Volume 5, Issue 2, 2019, Pages 77-90]
  • Melt mixing Composite processing and study of properties for polypropylene EPD60R/modified nanoclay Cloisite® 15A [Volume 5, Issue 2, 2019, Pages 101-108]
  • Membrane distillation Fabrication and optimization of superhydrophobic ZnO-SA/PVC/PVP nanocomposite membrane distillation for highly saline RO brine recovery [Volume 9, Issue 2, 2023, Pages 103-113]
  • Membrane permeability Modified CNTs/Nafion composite: The role of sulfonate groups on the performance of prepared proton exchange methanol fuel cell’s membrane [Volume 3, Issue 4, 2017, Pages 211-218]
  • Metal-Organic framework Feasibility study on the use of MIL-53(Al) as a support for iron catalysts in the CO hydrogenation reaction [Volume 9, Issue 1, 2023, Pages 43-49]
  • Methanol Hollow alumina nanospheres as novel catalyst for the conversion of methanol to dimethyl ether [Volume 2, Issue 1, 2016, Pages 15-22]
  • Methanol Dehydration Effects of catalyst particle size on methanol dehydration at different temperatures and weight hourly space velocities [Volume 2, Issue 1, 2016, Pages 41-47]
  • Methylene Blue Modified bentonite as adsorbent material for the removal of the basic dye methylene blue from aqueous solutions [Volume 7, Issue 1, 2021, Pages 23-31]
  • Methyl orange Synthesis, structural characterization and catalytic activity of TiO2/Al2O3 photo-composite [Volume 1, Issue 1, 2015, Pages 31-38]
  • Methyl orange Photocatalytic degradation of methyl orange using TiO2:Mg2+/zeolite composite under visible light irradiation [Volume 6, Issue 1, 2020, Pages 1-12]
  • Mg Photocatalytic degradation of methyl orange using TiO2:Mg2+/zeolite composite under visible light irradiation [Volume 6, Issue 1, 2020, Pages 1-12]
  • MgAl2O4 Spinel Preparation of pure cordierite through heat treatment of combustion synthesized magnesium aluminate spinel and silica nanoparticles [Volume 9, Issue 1, 2023, Pages 11-18]
  • MHD MHD Three-Dimensional Stagnation-Point Flow and Heat Transfer of a Nanofluid over a Stretching Sheet [Volume 1, Issue 3, 2015, Pages 141-151]
  • MHD mixed convection Effects of Brownian motion and Thermophoresis on MHD Mixed Convection Stagnation-point Flow of a Nanofluid Toward a Stretching Vertical Sheet in Porous Medium [Volume 1, Issue 4, 2015, Pages 225-240]
  • Micro-Channel Reactor Effects of catalyst particle size on methanol dehydration at different temperatures and weight hourly space velocities [Volume 2, Issue 1, 2016, Pages 41-47]
  • Microfluidic application Activated pharmaceutical ingredients produced by microreactors versus batch processes: A review [Volume 8, Issue 2, 2022, Pages 63-78]
  • Micromixer Activated pharmaceutical ingredients produced by microreactors versus batch processes: A review [Volume 8, Issue 2, 2022, Pages 63-78]
  • Micronized drugs A new method for the preparation of pure topiramate with a micron particle size [Volume 3, Issue 3, 2017, Pages 169-174]
  • Micronized drugs A new method for the preparation of pure acamprosate calcium with a micron particle size [Volume 8, Issue 1, 2022, Pages 17-23]
  • Microreactor Activated pharmaceutical ingredients produced by microreactors versus batch processes: A review [Volume 8, Issue 2, 2022, Pages 63-78]
  • Micro-spheres Effect of Sn Doping on Structural and Optical Properties of 2D α-MoO3 Nanostructures [Volume 2, Issue 2, 2016, Pages 87-93]
  • Microstructure Fabrication method, microstructural characteristics, and hardness behavior of an interpenetrating phases hybrid aluminum/alumina-nanodiamond composite [Volume 9, Issue 2, 2023, Pages 63-71]
  • Microwave treatment The effect of microwave radiation on grinding kinetics by selection function and breakage function - A case study of low-grade siliceous manganese ores [Volume 4, Issue 1, 2018, Pages 39-47]
  • Middle coal Crushing analysis of the industrial cage mill and the laboratory jaw crusher [Volume 3, Issue 3, 2017, Pages 155-161]
  • Mn3O4/Fe3O4 nanocomposite Synthesizing Fe3O4, Mn3O4 and Mn3O4/Fe3O4 nanocatalysts using the sol-gel method as new precursors for the degradation of phenol by catalytic ozonation [Volume 8, Issue 1, 2022, Pages 39-51]
  • Modeling Drying of calcium carbonate in a batch spouted bed dryer: optimization and kinetics modeling [Volume 3, Issue 2, 2017, Pages 89-99]
  • Modeling Optimization of SiC particle distribution during compocasting of A356-SiCp composites using D-optimal experiment design [Volume 3, Issue 3, 2017, Pages 145-154]
  • Modelling Dynamic modelling of hardness changes of aluminium nanostructure during mechanical ball milling process [Volume 3, Issue 1, 2017, Pages 25-32]
  • Modification Investigation of phosphate adsorption from aqueous media using synthetic mordenite and modified natural clinoptilolite zeolite adsorbents: characteristics, kinetics, and isotherms [Volume 7, Issue 2, 2021, Pages 119-130]
  • Modified bentonite Modified bentonite as adsorbent material for the removal of the basic dye methylene blue from aqueous solutions [Volume 7, Issue 1, 2021, Pages 23-31]
  • Modified carbon paste electrode Combustion synthesis of sponge-like CeO2 powder for selective determination of uric acid in biological fluids [Volume 7, Issue 2, 2021, Pages 73-82]
  • Modified perlite A comparative study of malachite green removal from an aqueous solution using raw and chemically modified expanded perlite [Volume 3, Issue 2, 2017, Pages 79-87]
  • Molecular dynamics simulation Removal of Heavy Metal Particles by LTJ, ANA, SVR, BEC and MER zeolites particles: A Molecular Dynamics Simulation Study [Volume 1, Issue 2, 2015, Pages 99-111]
  • Molybdenum trioxide Effect of Sn Doping on Structural and Optical Properties of 2D α-MoO3 Nanostructures [Volume 2, Issue 2, 2016, Pages 87-93]
  • Monochlorobenzene (MCB) A sol-gel based method for preparation of Ni/La-Al2O3 as a new catalyst for dechlorination of monochlorobenzene [Volume 1, Issue 2, 2015, Pages 113-120]
  • Monoclinic Synthesis of pure monoclinic zirconia nanoparticles using ultrasound cavitation technique [Volume 2, Issue 2, 2016, Pages 69-77]
  • MoO2Cl2(dmf)2 Surface decorated magnetite nanoparticles with birhodanine and MoO2Cl2(dmf)2 as a new magnetic catalyst for epoxidation of olefins [Volume 5, Issue 1, 2019, Pages 47-60]
  • Multicomponent reaction Zn2SnO4 nanostructure as an efficient catalyst for the preparation of pyrano[3,2-c]chromene and pyrano[4,3-b]pyran derivatives under ultrasonic irradiation conditions [Volume 5, Issue 1, 2019, Pages 61-69]
  • Multi-layer perceptron Modeling heat transfer of non-Newtonian nanofluids using hybrid ANN-Metaheuristic optimization algorithm [Volume 3, Issue 4, 2017, Pages 233-241]
  • Multivariate methods Application of Fe3O4@THAM-CH2CH2Cl magnetic nanoparticle as a new adsorbent in ultrasonically assisted removal of Congo red from aqueous solutions [Volume 8, Issue 2, 2022, Pages 103-114]
  • MWCNT Adsorption of CO2 and SO2 on multi-walled carbon nanotubes: experimental data and modeling using artificial neural network [Volume 5, Issue 1, 2019, Pages 33-45]

N

  • Nafion Modified CNTs/Nafion composite: The role of sulfonate groups on the performance of prepared proton exchange methanol fuel cell’s membrane [Volume 3, Issue 4, 2017, Pages 211-218]
  • Nanoclay Composite processing and study of properties for polypropylene EPD60R/modified nanoclay Cloisite® 15A [Volume 5, Issue 2, 2019, Pages 101-108]
  • Nanoclay The effect of nanoclay on the creation of clusters of polyamide 6 microfibrils [Volume 8, Issue 1, 2022, Pages 25-37]
  • Nanoclay particles Investigating the effects of chemical modification of clay nanoparticles on thermal degradation and mechanical properties of TPU/nanoclay composites [Volume 1, Issue 1, 2015, Pages 1-11]
  • Nanocluster Computational study of electronic, spectroscopic, and chemical properties of (CdO)n (n=1-7) nanoclusters as a transparent conducting oxide [Volume 1, Issue 4, 2015, Pages 195-204]
  • Nanocomposite Investigating the effects of chemical modification of clay nanoparticles on thermal degradation and mechanical properties of TPU/nanoclay composites [Volume 1, Issue 1, 2015, Pages 1-11]
  • Nanocomposite Synthesis and characterization of Polyaniline Nanocomposite by Using Several Types of Surfactants in Aqueous Media [Volume 1, Issue 3, 2015, Pages 163-170]
  • Nanocomposite A novel application of Co3O4@SiO2 nanocomposite as an efficient and robust catalyst for the preparation of some imidazolone derivatives [Volume 4, Issue 2, 2018, Pages 111-117]
  • Nanocomposite Composite processing and study of properties for polypropylene EPD60R/modified nanoclay Cloisite® 15A [Volume 5, Issue 2, 2019, Pages 101-108]
  • Nanocomposite Substrates Thin film nanocomposite forward osmosis membrane prepared by graphene oxide embedded PSf substrate [Volume 2, Issue 2, 2016, Pages 103-117]
  • Nanodiamond Fabrication method, microstructural characteristics, and hardness behavior of an interpenetrating phases hybrid aluminum/alumina-nanodiamond composite [Volume 9, Issue 2, 2023, Pages 63-71]
  • Nanoencapsulation Maltodextrine nanoparticles loaded with polyphenolic extract from apple industrial waste: preparation, optimization and characterization [Volume 3, Issue 4, 2017, Pages 197-209]
  • Nanofluid Enhancement in energy and exergy efficiency of a solar receiver using suspended alumina nanparticles (nanofluid) as heat transfer fluid [Volume 1, Issue 2, 2015, Pages 73-83]
  • Nanofluid MHD Three-Dimensional Stagnation-Point Flow and Heat Transfer of a Nanofluid over a Stretching Sheet [Volume 1, Issue 3, 2015, Pages 141-151]
  • Nanofluid Effects of Brownian motion and Thermophoresis on MHD Mixed Convection Stagnation-point Flow of a Nanofluid Toward a Stretching Vertical Sheet in Porous Medium [Volume 1, Issue 4, 2015, Pages 225-240]
  • Nanofluid CFD simulations on natural convection heat transfer of alumina-water nanofluid with Brownian motion effect in a 3-D enclosure [Volume 2, Issue 3, 2016, Pages 163-171]
  • Nanofluids Modeling heat transfer of non-Newtonian nanofluids using hybrid ANN-Metaheuristic optimization algorithm [Volume 3, Issue 4, 2017, Pages 233-241]
  • Nanofluids Numerical simulation of nanofluids flow and heat transfer through isosceles triangular channels [Volume 4, Issue 1, 2018, Pages 29-38]
  • Nanofluids Fabrication of Zn1-XCuXO nanoparticles and investigation of their effect on the thermal conductivity of nanofluids [Volume 8, Issue 2, 2022, Pages 95-102]
  • Nano iron particles Petrochemical wastewater treatment by modified electro-Fenton process with nano iron particles [Volume 1, Issue 4, 2015, Pages 215-223]
  • Nanomaterials Synthesis, characterization, and magnetic properties of NiFe2O4 nanoparticles [Volume 8, Issue 2, 2022, Pages 79-85]
  • Nanoparticel Application of CdO nanocatalyst in the acetylation of benzyl alcohols and degradation of sulfathiazole as a green approach [Volume 4, Issue 1, 2018, Pages 49-57]
  • Nano-platelets Effect of Sn Doping on Structural and Optical Properties of 2D α-MoO3 Nanostructures [Volume 2, Issue 2, 2016, Pages 87-93]
  • Nanoprecipitation Maltodextrine nanoparticles loaded with polyphenolic extract from apple industrial waste: preparation, optimization and characterization [Volume 3, Issue 4, 2017, Pages 197-209]
  • Nano– silica The effect of adding nano-silica on the ultrasonic pulse velocity of geopolymer concrete [Volume 7, Issue 2, 2021, Pages 99-105]
  • Nanospherical Application of CdO nanocatalyst in the acetylation of benzyl alcohols and degradation of sulfathiazole as a green approach [Volume 4, Issue 1, 2018, Pages 49-57]
  • Nanostructure Dynamic modelling of hardness changes of aluminium nanostructure during mechanical ball milling process [Volume 3, Issue 1, 2017, Pages 25-32]
  • Nano-structure Synthesis and Statistical Analysis of Changing Size of Nano-structured PbO2 during Mechanical Milling Using Taguchi Methodology [Volume 2, Issue 1, 2016, Pages 49-54]
  • Narrow band gap ZnS/ZnO heterostructure semiconductor: A promising ionic liquid media approach without calcination [Volume 8, Issue 2, 2022, Pages 115-119]
  • Na+-montmorillonite nanoclay Effect of surface-functionalization of Na+-montmorillonite nanoclay using 3-aminopropyltrimethoxy silane on the mechanical properties of E-glass chopped strand mat/epoxy composites [Volume 4, Issue 2, 2018, Pages 59-65]
  • Natural convection CFD simulations on natural convection heat transfer of alumina-water nanofluid with Brownian motion effect in a 3-D enclosure [Volume 2, Issue 3, 2016, Pages 163-171]
  • Natural polymers Maltodextrine nanoparticles loaded with polyphenolic extract from apple industrial waste: preparation, optimization and characterization [Volume 3, Issue 4, 2017, Pages 197-209]
  • Natural Zeolite Iranian natural zeolite particle modification: Green synthesis, characterization, and oil spill remediation [Volume 5, Issue 2, 2019, Pages 77-90]
  • NCP@SiO3Pr(CH2)6N4 Synthesis and characterization of the aminated nano-zeolite: A green heterogeneous nanocatalyst for the synthesis of valuable organic compounds [Volume 8, Issue 1, 2022, Pages 53-62]
  • NFD model Dynamic modelling of hardness changes of aluminium nanostructure during mechanical ball milling process [Volume 3, Issue 1, 2017, Pages 25-32]
  • Ni-Doped CaTiO3 Synthesis and characterization of Ni-doped CaTiO3 nano-powders and their potential for the removal of Cd from wastewaters [Volume 8, Issue 1, 2022, Pages 9-16]
  • NiFe2O4 Synthesis, characterization, and magnetic properties of NiFe2O4 nanoparticles [Volume 8, Issue 2, 2022, Pages 79-85]
  • NiFe2O4 Meso-adsorbent Preparation and application of meso-adsorbent NiFe2O4 for the ultrasound-enhanced removal of dye pollutant in water and wastewater: A multivariate study [Volume 6, Issue 2, 2020, Pages 103-111]
  • Ni/La-Al2O3 catalyst A sol-gel based method for preparation of Ni/La-Al2O3 as a new catalyst for dechlorination of monochlorobenzene [Volume 1, Issue 2, 2015, Pages 113-120]
  • NMR measurement The measurement of droplet size distribution of water-oil emulsion through NMR method [Volume 2, Issue 1, 2016, Pages 31-39]
  • Noble metal nanoparticles Microstructure and Optical Properties of Lustre Glazes Produced on Copper Body [(Articles in Press)]
  • Non-Newtonian Modeling heat transfer of non-Newtonian nanofluids using hybrid ANN-Metaheuristic optimization algorithm [Volume 3, Issue 4, 2017, Pages 233-241]
  • Non-spherical particles Numerical simulation of effect of non-spherical particle shape and bed size on hydrodynamics of packed beds [Volume 3, Issue 3, 2017, Pages 133-143]
  • Nozzle Numerical investigation of the effect of different parameters on emitted shockwave from bubble collapse in a nozzle [Volume 6, Issue 2, 2020, Pages 67-80]
  • Numerical simulation Numerical simulation of nanofluids flow and heat transfer through isosceles triangular channels [Volume 4, Issue 1, 2018, Pages 29-38]
  • Nusselt Number Numerical simulation of nanofluids flow and heat transfer through isosceles triangular channels [Volume 4, Issue 1, 2018, Pages 29-38]
  • Nylon-66 Investigation of Mechanical Properties Prediction of Synthesized Nylon-66/Nano-Calcium Carbonate Composites [Volume 1, Issue 4, 2015, Pages 241-251]

O

  • Ocular Delivery Development and characterization of optimized sustained release voriconazole-loaded chitosan nanoparticles for ocular delivery [Volume 7, Issue 1, 2021, Pages 1-10]
  • One-pot synthesis One-Pot solvent-free synthesis of Highly Substituted Imidazoles catalyzed by zeolite [Volume 1, Issue 4, 2015, Pages 253-263]
  • OpenFOAM Numerical investigation of the effect of nanoparticle sedimentation on the thermal behavior of cavities with different cross-sectional shapes [Volume 9, Issue 2, 2023, Pages 73-84]
  • Optimization Optimization of SiC particle distribution during compocasting of A356-SiCp composites using D-optimal experiment design [Volume 3, Issue 3, 2017, Pages 145-154]
  • Optimization Optimization of an ecofriendly coating containing chitosan and gelatin as corrosion inhibitor of carbon steel grade E by Response Surface Method [Volume 5, Issue 1, 2019, Pages 23-31]
  • Oxazolone A novel application of Co3O4@SiO2 nanocomposite as an efficient and robust catalyst for the preparation of some imidazolone derivatives [Volume 4, Issue 2, 2018, Pages 111-117]

P

  • Particle Flow Cyclone separator theories to predict performance and flow characteristics [Volume 7, Issue 2, 2021, Pages 83-98]
  • Particle size A new method for the preparation of pure topiramate with a micron particle size [Volume 3, Issue 3, 2017, Pages 169-174]
  • Particles parameters Energy Modeling and Simulation including particle technologies within Single and Double Pass Solar Air Heaters [Volume 2, Issue 2, 2016, Pages 95-102]
  • Particle swarm Optimization Modeling heat transfer of non-Newtonian nanofluids using hybrid ANN-Metaheuristic optimization algorithm [Volume 3, Issue 4, 2017, Pages 233-241]
  • Particulate pollution Assessment of an atmospheric heavy metal from a transport pool within the Ilorin Metropolis, Nigeria [Volume 7, Issue 1, 2021, Pages 11-21]
  • PbO2 Synthesis and Statistical Analysis of Changing Size of Nano-structured PbO2 during Mechanical Milling Using Taguchi Methodology [Volume 2, Issue 1, 2016, Pages 49-54]
  • Pervaporation CFD simulation of pervaporation of organic aqueous mixture through silicalite nano-pore zeolite membrane [Volume 3, Issue 3, 2017, Pages 121-132]
  • Petrochemical wastewater Petrochemical wastewater treatment by modified electro-Fenton process with nano iron particles [Volume 1, Issue 4, 2015, Pages 215-223]
  • Pharmaceutical industry Activated pharmaceutical ingredients produced by microreactors versus batch processes: A review [Volume 8, Issue 2, 2022, Pages 63-78]
  • Photocatalyst Improvement in photocatalysts and photocatalytic reactors for water and wastewater treatment: A review [Volume 2, Issue 3, 2016, Pages 119-140]
  • Photocatalyst Photocatalytic degradation of methyl orange using TiO2:Mg2+/zeolite composite under visible light irradiation [Volume 6, Issue 1, 2020, Pages 1-12]
  • Photocatalytic degradation Synthesis, structural characterization and catalytic activity of TiO2/Al2O3 photo-composite [Volume 1, Issue 1, 2015, Pages 31-38]
  • Photocatalytic degradation Enhanced photocatalytic degradation of 2,4-dichlorophenol in water solution using Sr-doped ZnAl2O4 nanoparticles [Volume 4, Issue 2, 2018, Pages 101-109]
  • P/M Lubricants Experimental Investigation of Metal Powder Compaction without Using Lubricant [Volume 2, Issue 3, 2016, Pages 141-149]
  • Polyacrylamide Study of different methods to induce crosslinking of polyacrylamide for agriculture process [Volume 5, Issue 1, 2019, Pages 1-11]
  • Polyacrylamide gel Synthesis, characterization, and magnetic properties of NiFe2O4 nanoparticles [Volume 8, Issue 2, 2022, Pages 79-85]
  • Polyamide 6 Synthesis of Polyamide 6 by Anionic Polymerization of ε-Caprolactam in an Internal Mixer: Effect of Polymerization Reaction Time [Volume 1, Issue 2, 2015, Pages 91-98]
  • Polyamide 6 The effect of nanoclay on the creation of clusters of polyamide 6 microfibrils [Volume 8, Issue 1, 2022, Pages 25-37]
  • Polyurethanes Investigating the effects of chemical modification of clay nanoparticles on thermal degradation and mechanical properties of TPU/nanoclay composites [Volume 1, Issue 1, 2015, Pages 1-11]
  • Polyvinylpyrrolidone Synthesis and structural properties of Polyvinylpyrrolidone based nanocomposite hydrogels for isoniazid drug delivery [Volume 1, Issue 3, 2015, Pages 183-193]
  • Porosity Numerical simulation of effect of non-spherical particle shape and bed size on hydrodynamics of packed beds [Volume 3, Issue 3, 2017, Pages 133-143]
  • Porous cerium oxide powder Combustion synthesis of sponge-like CeO2 powder for selective determination of uric acid in biological fluids [Volume 7, Issue 2, 2021, Pages 73-82]
  • Powder Compaction Experimental Investigation of Metal Powder Compaction without Using Lubricant [Volume 2, Issue 3, 2016, Pages 141-149]
  • PP/PET/SEBS Effective Parameters on the Phase Morphology and Mechanical Properties of PP/PET/SEBS Ternary Polymer Blends [Volume 1, Issue 1, 2015, Pages 39-48]
  • Pressure drop Numerical simulation of effect of non-spherical particle shape and bed size on hydrodynamics of packed beds [Volume 3, Issue 3, 2017, Pages 133-143]
  • Pressure drop Cyclone separator theories to predict performance and flow characteristics [Volume 7, Issue 2, 2021, Pages 83-98]
  • Progressively censoring Modeling of splat particle splashing data during thermal spraying with the Burr distribution [Volume 3, Issue 1, 2017, Pages 41-50]
  • Proton conductivity Modified CNTs/Nafion composite: The role of sulfonate groups on the performance of prepared proton exchange methanol fuel cell’s membrane [Volume 3, Issue 4, 2017, Pages 211-218]
  • PSD FCC catalyst attrition behavior at high temperatures [Volume 5, Issue 4, 2019, Pages 135-143]
  • Pyrite sulphur removal Ash and sulphur removal from bitumen using column flotation technique: Experimental and response surface methodology modeling [Volume 2, Issue 1, 2016, Pages 1-13]

Q

  • Quinazolinone Green preparation of tetrahydrobenzimidazo[2,1-b]quinazolin-1(2H)-ones using γ-Fe2O3@KSF as novel and recyclable magnetic catalyst [Volume 5, Issue 4, 2019, Pages 179-186]

R

  • Radar absorbing materials Investigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite [Volume 1, Issue 2, 2015, Pages 85-90]
  • Radiation attenuation, Dispersion rheology, Mtallic compounds, Radiology, X-ray On study of X-ray absorption and properties of dispersion of W, MoS2 and B4C particles in high density polyethylene [Volume 3, Issue 1, 2017, Pages 13-24]
  • Rare earth roll magnetic separation Preliminary study on upgrading silica sand from the Elwadi Elgedid, Western Desert, Egypt for compatibility with various industrial applications [Volume 7, Issue 2, 2021, Pages 107-117]
  • Reaction time Synthesis of Polyamide 6 by Anionic Polymerization of ε-Caprolactam in an Internal Mixer: Effect of Polymerization Reaction Time [Volume 1, Issue 2, 2015, Pages 91-98]
  • Real and imaginary potential Approximation and analytical study of the relativistic confined two particles state within the complex potential in the isotropic medium [Volume 9, Issue 2, 2023, Pages 85-101]
  • Receiver Enhancement in energy and exergy efficiency of a solar receiver using suspended alumina nanparticles (nanofluid) as heat transfer fluid [Volume 1, Issue 2, 2015, Pages 73-83]
  • Redox cyclability Effects of Fe2O3 addition and mechanical activation on thermochemical heat storage properties of the Co3O4/CoO system [Volume 4, Issue 1, 2018, Pages 13-22]
  • Reduction Theoretical thermodynamics and practical kinetics studies of oxygen desorption from Co3O4-5 wt% Al2O3 and Co3O4-5 wt% Y2O3 composites [Volume 5, Issue 1, 2019, Pages 13-21]
  • Reflux route ZnS/ZnO heterostructure semiconductor: A promising ionic liquid media approach without calcination [Volume 8, Issue 2, 2022, Pages 115-119]
  • Relativistic correction Exciton properties in 2D-Xenes nanomaterials within quantum field approaches [Volume 7, Issue 2, 2021, Pages 59-71]
  • Removal Investigation of phosphate adsorption from aqueous media using synthetic mordenite and modified natural clinoptilolite zeolite adsorbents: characteristics, kinetics, and isotherms [Volume 7, Issue 2, 2021, Pages 119-130]
  • Removal of cadmium Analysis of effective parameters on cadmium cementation reaction from the perspective of diffusion [Volume 6, Issue 2, 2020, Pages 81-93]
  • Removal of heavy metals Heavy metal removal using SnO2 nanoparticles prepared in a grape extract media [Volume 9, Issue 2, 2023, Pages 51-61]
  • Response surface methodology Ash and sulphur removal from bitumen using column flotation technique: Experimental and response surface methodology modeling [Volume 2, Issue 1, 2016, Pages 1-13]
  • Response surface methodology Application of response surface methodology for thorium(IV) removal using Amberlite IR-120 and IRA-400: Ion exchange equilibrium and kinetics [Volume 3, Issue 2, 2017, Pages 101-112]
  • Ring stiffness Composite processing and study of properties for polypropylene EPD60R/modified nanoclay Cloisite® 15A [Volume 5, Issue 2, 2019, Pages 101-108]
  • RO brine Fabrication and optimization of superhydrophobic ZnO-SA/PVC/PVP nanocomposite membrane distillation for highly saline RO brine recovery [Volume 9, Issue 2, 2023, Pages 103-113]
  • Root aqueous extract A green approach for the synthesis of silver nanoparticles using Lithospermum officinale root extract and evaluation of their antioxidant activity [Volume 3, Issue 4, 2017, Pages 187-195]
  • RSM FCC catalyst attrition behavior at high temperatures [Volume 5, Issue 4, 2019, Pages 135-143]
  • Rule of mixtures Investigation of Mechanical Properties Prediction of Synthesized Nylon-66/Nano-Calcium Carbonate Composites [Volume 1, Issue 4, 2015, Pages 241-251]
  • Rytova–Keldysh potential Exciton properties in 2D-Xenes nanomaterials within quantum field approaches [Volume 7, Issue 2, 2021, Pages 59-71]

S

  • Schrödinger equation Theoretical study of quantum and thermal properties of particles’ bound state in quantum disks [Volume 9, Issue 1, 2023, Pages 19-27]
  • Schrödinger equation Approximation and analytical study of the relativistic confined two particles state within the complex potential in the isotropic medium [Volume 9, Issue 2, 2023, Pages 85-101]
  • Separation and sorting The effects of suspending medium on dielectrophoretic systems for separating and sorting carbon nanotubes [Volume 5, Issue 4, 2019, Pages 123-134]
  • Shockwave Numerical investigation of the effect of different parameters on emitted shockwave from bubble collapse in a nozzle [Volume 6, Issue 2, 2020, Pages 67-80]
  • Shrinkage Effect of process parameters on quality properties and drying time of hawthorn in a vibro-fluidized bed dryer [Volume 3, Issue 1, 2017, Pages 51-62]
  • Silicalite CFD simulation of pervaporation of organic aqueous mixture through silicalite nano-pore zeolite membrane [Volume 3, Issue 3, 2017, Pages 121-132]
  • Silica sand Preliminary study on upgrading silica sand from the Elwadi Elgedid, Western Desert, Egypt for compatibility with various industrial applications [Volume 7, Issue 2, 2021, Pages 107-117]
  • Siliceous manganese ore The effect of microwave radiation on grinding kinetics by selection function and breakage function - A case study of low-grade siliceous manganese ores [Volume 4, Issue 1, 2018, Pages 39-47]
  • Silk Gamma irradiation induced surface modification of silk fabrics for antibacterial application [Volume 3, Issue 2, 2017, Pages 71-77]
  • Silo Effects of local vibration on silo discharge and jamming: Employing an experimental approach [Volume 4, Issue 2, 2018, Pages 91-100]
  • Silver nanoparticles A green approach for the synthesis of silver nanoparticles using Lithospermum officinale root extract and evaluation of their antioxidant activity [Volume 3, Issue 4, 2017, Pages 187-195]
  • Silver nanoparticles Interpreting the effect of operating variable, seed, and impurity on the induction time of silver nanoparticles precipitation by cluster coagulation models [Volume 4, Issue 2, 2018, Pages 81-90]
  • Silylation Surface decorated magnetite nanoparticles with birhodanine and MoO2Cl2(dmf)2 as a new magnetic catalyst for epoxidation of olefins [Volume 5, Issue 1, 2019, Pages 47-60]
  • Sintering Effects of Fe2O3 addition and mechanical activation on thermochemical heat storage properties of the Co3O4/CoO system [Volume 4, Issue 1, 2018, Pages 13-22]
  • Size Distribution Evaluation of the effect of granulation processing parameters on the granule properties: Lactose- Cornstarch case study [Volume 1, Issue 3, 2015, Pages 171-182]
  • SnO2 Heavy metal removal using SnO2 nanoparticles prepared in a grape extract media [Volume 9, Issue 2, 2023, Pages 51-61]
  • Sol-gel A sol-gel based method for preparation of Ni/La-Al2O3 as a new catalyst for dechlorination of monochlorobenzene [Volume 1, Issue 2, 2015, Pages 113-120]
  • Solubility A new method for the preparation of pure topiramate with a micron particle size [Volume 3, Issue 3, 2017, Pages 169-174]
  • Solubility A new method for the preparation of pure acamprosate calcium with a micron particle size [Volume 8, Issue 1, 2022, Pages 17-23]
  • Solution combustion synthesis Preparation of pure cordierite through heat treatment of combustion synthesized magnesium aluminate spinel and silica nanoparticles [Volume 9, Issue 1, 2023, Pages 11-18]
  • Solvent-free One-Pot solvent-free synthesis of Highly Substituted Imidazoles catalyzed by zeolite [Volume 1, Issue 4, 2015, Pages 253-263]
  • Solvent-free Green preparation of tetrahydrobenzimidazo[2,1-b]quinazolin-1(2H)-ones using γ-Fe2O3@KSF as novel and recyclable magnetic catalyst [Volume 5, Issue 4, 2019, Pages 179-186]
  • Solventless modification Iranian natural zeolite particle modification: Green synthesis, characterization, and oil spill remediation [Volume 5, Issue 2, 2019, Pages 77-90]
  • Solvothermal A new precursor for preparation of magnetite (Fe3O4) nanoparticles [Volume 1, Issue 2, 2015, Pages 65-72]
  • Solvothermal Investigation of phosphate adsorption from aqueous media using synthetic mordenite and modified natural clinoptilolite zeolite adsorbents: characteristics, kinetics, and isotherms [Volume 7, Issue 2, 2021, Pages 119-130]
  • Sonochemical method Synthesis of pure monoclinic zirconia nanoparticles using ultrasound cavitation technique [Volume 2, Issue 2, 2016, Pages 69-77]
  • Sorption capacity Investigation of phosphate adsorption from aqueous media using synthetic mordenite and modified natural clinoptilolite zeolite adsorbents: characteristics, kinetics, and isotherms [Volume 7, Issue 2, 2021, Pages 119-130]
  • Specific rate of breakage The effect of microwave radiation on grinding kinetics by selection function and breakage function - A case study of low-grade siliceous manganese ores [Volume 4, Issue 1, 2018, Pages 39-47]
  • Spherical Flame Effect of Radiation Heat Loss and Ventilation on Dust Explosions in Spherical Vessels [Volume 1, Issue 1, 2015, Pages 57-64]
  • Spherical Flame Effect of the temperature difference between gas and organic dust on propagating spherical flames [Volume 2, Issue 3, 2016, Pages 151-161]
  • Splashing Modeling of splat particle splashing data during thermal spraying with the Burr distribution [Volume 3, Issue 1, 2017, Pages 41-50]
  • Spouted bed dryer Drying of calcium carbonate in a batch spouted bed dryer: optimization and kinetics modeling [Volume 3, Issue 2, 2017, Pages 89-99]
  • Spray pyrolysis Effect of Sn Doping on Structural and Optical Properties of 2D α-MoO3 Nanostructures [Volume 2, Issue 2, 2016, Pages 87-93]
  • Spray pyrolysis A spray pyrolysis method for fabrication of superhydrophobic copper substrate based on modified-alumina powder by fatty acid [Volume 6, Issue 1, 2020, Pages 25-36]
  • Sr-Doped ZnAl2O4 nanoparticles Enhanced photocatalytic degradation of 2,4-dichlorophenol in water solution using Sr-doped ZnAl2O4 nanoparticles [Volume 4, Issue 2, 2018, Pages 101-109]
  • Stagnation-point flow MHD Three-Dimensional Stagnation-Point Flow and Heat Transfer of a Nanofluid over a Stretching Sheet [Volume 1, Issue 3, 2015, Pages 141-151]
  • Stagnation-point flow Effects of Brownian motion and Thermophoresis on MHD Mixed Convection Stagnation-point Flow of a Nanofluid Toward a Stretching Vertical Sheet in Porous Medium [Volume 1, Issue 4, 2015, Pages 225-240]
  • Steel particle Mechanical behavior of magnesium-steel particles composites with interpenetrating phases [Volume 9, Issue 1, 2023, Pages 29-34]
  • Stern-Volmer equation Luminescence quenching studies of [Ru(dMeObpy)3]2+ complex using the quinone derivative-effect of micelles [Volume 9, Issue 1, 2023, Pages 35-42]
  • Stirred media mill Grinding-aid effect on the colour properties (Ry, whiteness and yellowness) of calcite in stirred media milling [Volume 2, Issue 1, 2016, Pages 23-29]
  • Strength Mechanical behavior of magnesium-steel particles composites with interpenetrating phases [Volume 9, Issue 1, 2023, Pages 29-34]
  • Stretching plate MHD Three-Dimensional Stagnation-Point Flow and Heat Transfer of a Nanofluid over a Stretching Sheet [Volume 1, Issue 3, 2015, Pages 141-151]
  • Stretching vertical plate Effects of Brownian motion and Thermophoresis on MHD Mixed Convection Stagnation-point Flow of a Nanofluid Toward a Stretching Vertical Sheet in Porous Medium [Volume 1, Issue 4, 2015, Pages 225-240]
  • Sturmian function Theoretical study of quantum and thermal properties of particles’ bound state in quantum disks [Volume 9, Issue 1, 2023, Pages 19-27]
  • Subharmonic threshold A modified Marmottant model to study the effects of a shell rupture on the subharmonic threshold of encapsulated microbubbles [Volume 7, Issue 1, 2021, Pages 41-50]
  • Sulfathiazole Application of CdO nanocatalyst in the acetylation of benzyl alcohols and degradation of sulfathiazole as a green approach [Volume 4, Issue 1, 2018, Pages 49-57]
  • Sulfonate Modified CNTs Modified CNTs/Nafion composite: The role of sulfonate groups on the performance of prepared proton exchange methanol fuel cell’s membrane [Volume 3, Issue 4, 2017, Pages 211-218]
  • Superhydrophobic A spray pyrolysis method for fabrication of superhydrophobic copper substrate based on modified-alumina powder by fatty acid [Volume 6, Issue 1, 2020, Pages 25-36]
  • Surface functionalization Effect of surface-functionalization of Na+-montmorillonite nanoclay using 3-aminopropyltrimethoxy silane on the mechanical properties of E-glass chopped strand mat/epoxy composites [Volume 4, Issue 2, 2018, Pages 59-65]
  • Surface modification Gamma irradiation induced surface modification of silk fabrics for antibacterial application [Volume 3, Issue 2, 2017, Pages 71-77]
  • Surfactant Synthesis and characterization of Polyaniline Nanocomposite by Using Several Types of Surfactants in Aqueous Media [Volume 1, Issue 3, 2015, Pages 163-170]
  • Surfactant Luminescence quenching studies of [Ru(dMeObpy)3]2+ complex using the quinone derivative-effect of micelles [Volume 9, Issue 1, 2023, Pages 35-42]
  • Surfactant-modified dolomite Removal of crystal violet from aquatic environment by surfactant-modified dolomite [Volume 2, Issue 3, 2016, Pages 173-182]
  • Suspending medium The effects of suspending medium on dielectrophoretic systems for separating and sorting carbon nanotubes [Volume 5, Issue 4, 2019, Pages 123-134]
  • Suspension stability Electrophoretic deposition and corrosion behavior study of aluminum coating on AZ91D substrate [Volume 3, Issue 4, 2017, Pages 219-232]
  • Swelling Synthesis and structural properties of Polyvinylpyrrolidone based nanocomposite hydrogels for isoniazid drug delivery [Volume 1, Issue 3, 2015, Pages 183-193]
  • Synthesis Synthesis and Statistical Analysis of Changing Size of Nano-structured PbO2 during Mechanical Milling Using Taguchi Methodology [Volume 2, Issue 1, 2016, Pages 49-54]
  • Synthesis Synthesizing Fe3O4, Mn3O4 and Mn3O4/Fe3O4 nanocatalysts using the sol-gel method as new precursors for the degradation of phenol by catalytic ozonation [Volume 8, Issue 1, 2022, Pages 39-51]

T

  • Taguchi method Evaluation of the effect of granulation processing parameters on the granule properties: Lactose- Cornstarch case study [Volume 1, Issue 3, 2015, Pages 171-182]
  • Taguchi method Removal of crystal violet from aquatic environment by surfactant-modified dolomite [Volume 2, Issue 3, 2016, Pages 173-182]
  • Taguchi method Drying of calcium carbonate in a batch spouted bed dryer: optimization and kinetics modeling [Volume 3, Issue 2, 2017, Pages 89-99]
  • Tautomer The computational study of the tautomerization of Dacarbazine in a biological system: The DFT approach [Volume 6, Issue 1, 2020, Pages 55-60]
  • Tautomer Theoretical study of the tautomerization of Carmustine in a biological media as an anti-cancer drug [Volume 7, Issue 1, 2021, Pages 51-57]
  • Temperature Study of different methods to induce crosslinking of polyacrylamide for agriculture process [Volume 5, Issue 1, 2019, Pages 1-11]
  • Tensile strength Effect of graphene nanoplatelets on the microstructure and mechanical behavior of erbium-modified Al-7.5Si-0.5Mg alloy [Volume 6, Issue 1, 2020, Pages 37-45]
  • Ternary Blend Effective Parameters on the Phase Morphology and Mechanical Properties of PP/PET/SEBS Ternary Polymer Blends [Volume 1, Issue 1, 2015, Pages 39-48]
  • Tetrasubstituted imidazoles One-Pot solvent-free synthesis of Highly Substituted Imidazoles catalyzed by zeolite [Volume 1, Issue 4, 2015, Pages 253-263]
  • Thermal Conductivity Fabrication of Zn1-XCuXO nanoparticles and investigation of their effect on the thermal conductivity of nanofluids [Volume 8, Issue 2, 2022, Pages 95-102]
  • Thermal decomposition Synthesis of pure monoclinic zirconia nanoparticles using ultrasound cavitation technique [Volume 2, Issue 2, 2016, Pages 69-77]
  • Thermal degradation Investigating the effects of chemical modification of clay nanoparticles on thermal degradation and mechanical properties of TPU/nanoclay composites [Volume 1, Issue 1, 2015, Pages 1-11]
  • Thermal Efficiency Enhancement in energy and exergy efficiency of a solar receiver using suspended alumina nanparticles (nanofluid) as heat transfer fluid [Volume 1, Issue 2, 2015, Pages 73-83]
  • Thermal Properties Approximation and analytical study of the relativistic confined two particles state within the complex potential in the isotropic medium [Volume 9, Issue 2, 2023, Pages 85-101]
  • Thermal Spray Modeling of splat particle splashing data during thermal spraying with the Burr distribution [Volume 3, Issue 1, 2017, Pages 41-50]
  • Thermochemical Effects of Fe2O3 addition and mechanical activation on thermochemical heat storage properties of the Co3O4/CoO system [Volume 4, Issue 1, 2018, Pages 13-22]
  • Thin film Microstructure and Optical Properties of Lustre Glazes Produced on Copper Body [(Articles in Press)]
  • Thin-layer drying An experimental investigation on drying kinetics of calcium carbonate [Volume 1, Issue 3, 2015, Pages 153-162]
  • Th(IV) Removal Application of response surface methodology for thorium(IV) removal using Amberlite IR-120 and IRA-400: Ion exchange equilibrium and kinetics [Volume 3, Issue 2, 2017, Pages 101-112]
  • TiO2 Synthesis, structural characterization and catalytic activity of TiO2/Al2O3 photo-composite [Volume 1, Issue 1, 2015, Pages 31-38]
  • TiO2-Al2O3 nano-composite Synthesis, structural characterization and catalytic activity of TiO2/Al2O3 photo-composite [Volume 1, Issue 1, 2015, Pages 31-38]
  • TiO2 Photocatalytic degradation of methyl orange using TiO2:Mg2+/zeolite composite under visible light irradiation [Volume 6, Issue 1, 2020, Pages 1-12]
  • Tl2O3 X-Shaped Thallium oxide nanostructures as a high performance photocatalyst for degradation of Cephalexin [Volume 5, Issue 2, 2019, Pages 117-122]
  • Topiramate A new method for the preparation of pure topiramate with a micron particle size [Volume 3, Issue 3, 2017, Pages 169-174]
  • Triangular duct Numerical simulation of nanofluids flow and heat transfer through isosceles triangular channels [Volume 4, Issue 1, 2018, Pages 29-38]
  • Trisubstituted imidazoles One-Pot solvent-free synthesis of Highly Substituted Imidazoles catalyzed by zeolite [Volume 1, Issue 4, 2015, Pages 253-263]
  • Triton-X-100 A new method for the preparation of pure acamprosate calcium with a micron particle size [Volume 8, Issue 1, 2022, Pages 17-23]

U

  • Ultrasonic assisted adsorption Preparation and application of meso-adsorbent NiFe2O4 for the ultrasound-enhanced removal of dye pollutant in water and wastewater: A multivariate study [Volume 6, Issue 2, 2020, Pages 103-111]
  • Ultrasound Effect of ultrasound on the dispersion of kaolinite and sepiolite suspensions with and without sodium silicate [Volume 6, Issue 1, 2020, Pages 47-54]
  • Upgrading techniques Preliminary study on upgrading silica sand from the Elwadi Elgedid, Western Desert, Egypt for compatibility with various industrial applications [Volume 7, Issue 2, 2021, Pages 107-117]
  • Uric acid Combustion synthesis of sponge-like CeO2 powder for selective determination of uric acid in biological fluids [Volume 7, Issue 2, 2021, Pages 73-82]

V

  • Vibration Effects of local vibration on silo discharge and jamming: Employing an experimental approach [Volume 4, Issue 2, 2018, Pages 91-100]
  • Vibro-Fluidized Bed Dryer Effect of process parameters on quality properties and drying time of hawthorn in a vibro-fluidized bed dryer [Volume 3, Issue 1, 2017, Pages 51-62]
  • Viscosity Effect of ion concentration on viscosity, electrical conductivity and deposit weight of doped nano alumina prepared by electrophoretic deposition [Volume 2, Issue 2, 2016, Pages 55-68]
  • Viscosity Analyzing the effect of gradation on specific gravity and viscosity of barite powder used in excavation mud [Volume 3, Issue 3, 2017, Pages 163-167]
  • Voltammetric determination Combustion synthesis of sponge-like CeO2 powder for selective determination of uric acid in biological fluids [Volume 7, Issue 2, 2021, Pages 73-82]
  • Voriconazole Development and characterization of optimized sustained release voriconazole-loaded chitosan nanoparticles for ocular delivery [Volume 7, Issue 1, 2021, Pages 1-10]

W

  • Washability analysis Crushing analysis of the industrial cage mill and the laboratory jaw crusher [Volume 3, Issue 3, 2017, Pages 155-161]
  • Wastewater Synthesis and characterization of Ni-doped CaTiO3 nano-powders and their potential for the removal of Cd from wastewaters [Volume 8, Issue 1, 2022, Pages 9-16]
  • Wastewater Application of Fe3O4@THAM-CH2CH2Cl magnetic nanoparticle as a new adsorbent in ultrasonically assisted removal of Congo red from aqueous solutions [Volume 8, Issue 2, 2022, Pages 103-114]
  • Wastewater Heavy metal removal using SnO2 nanoparticles prepared in a grape extract media [Volume 9, Issue 2, 2023, Pages 51-61]
  • Wastewater treatment Iranian natural zeolite particle modification: Green synthesis, characterization, and oil spill remediation [Volume 5, Issue 2, 2019, Pages 77-90]
  • Water and wastewater Preparation and application of meso-adsorbent NiFe2O4 for the ultrasound-enhanced removal of dye pollutant in water and wastewater: A multivariate study [Volume 6, Issue 2, 2020, Pages 103-111]
  • Water treatment Equilibrium, kinetic, and thermodynamic applications for methylene blue removal using Buxus sempervirens leaf powder as a powerful low-cost adsorbent [Volume 5, Issue 4, 2019, Pages 161-170]
  • Water-UDMH separation CFD simulation of pervaporation of organic aqueous mixture through silicalite nano-pore zeolite membrane [Volume 3, Issue 3, 2017, Pages 121-132]
  • Wear behavior Effect of graphene nanoplatelets on the microstructure and mechanical behavior of erbium-modified Al-7.5Si-0.5Mg alloy [Volume 6, Issue 1, 2020, Pages 37-45]
  • Wear properties Effect of ZrSiO4 particles on the wear properties of as-cast Al matrix particulate composites fabricated via various casting routes [Volume 5, Issue 4, 2019, Pages 171-177]
  • Work index The effect of microwave radiation on grinding kinetics by selection function and breakage function - A case study of low-grade siliceous manganese ores [Volume 4, Issue 1, 2018, Pages 39-47]

X

  • Xe and Kr Xenon and krypton separation in a chromatographic column packed with granulated nano NaY zeolite [Volume 1, Issue 1, 2015, Pages 49-55]

Y

  • Yttrium-nickel ferrite Structural and magnetic properties of chemically synthesized yttrium-substituted nickel nanoferrite [Volume 8, Issue 2, 2022, Pages 87-94]

Z

  • Zeolite One-Pot solvent-free synthesis of Highly Substituted Imidazoles catalyzed by zeolite [Volume 1, Issue 4, 2015, Pages 253-263]
  • Zeolite Photocatalytic degradation of methyl orange using TiO2:Mg2+/zeolite composite under visible light irradiation [Volume 6, Issue 1, 2020, Pages 1-12]
  • Zeolite Membrane CFD simulation of pervaporation of organic aqueous mixture through silicalite nano-pore zeolite membrane [Volume 3, Issue 3, 2017, Pages 121-132]
  • Zeolite particles Removal of Heavy Metal Particles by LTJ, ANA, SVR, BEC and MER zeolites particles: A Molecular Dynamics Simulation Study [Volume 1, Issue 2, 2015, Pages 99-111]
  • Zeta potential Effect of ultrasound on the dispersion of kaolinite and sepiolite suspensions with and without sodium silicate [Volume 6, Issue 1, 2020, Pages 47-54]
  • Zinc sulfate solution Analysis of effective parameters on cadmium cementation reaction from the perspective of diffusion [Volume 6, Issue 2, 2020, Pages 81-93]
  • Zirconia nanoparticles Synthesis of pure monoclinic zirconia nanoparticles using ultrasound cavitation technique [Volume 2, Issue 2, 2016, Pages 69-77]
  • Zn(II) complex Ultrasonic synthesis of Zn(II) methionine and ZnO nanostructures as a new precursor for ZnO nanoparticles and in-vitro study [Volume 5, Issue 2, 2019, Pages 109-116]
  • Zn2SnO4 nanoparticles Zn2SnO4 nanostructure as an efficient catalyst for the preparation of pyrano[3,2-c]chromene and pyrano[4,3-b]pyran derivatives under ultrasonic irradiation conditions [Volume 5, Issue 1, 2019, Pages 61-69]
  • ZnS/ZnO heterostructure ZnS/ZnO heterostructure semiconductor: A promising ionic liquid media approach without calcination [Volume 8, Issue 2, 2022, Pages 115-119]
  • Zr(IV) complex Synthesis of pure monoclinic zirconia nanoparticles using ultrasound cavitation technique [Volume 2, Issue 2, 2016, Pages 69-77]
  • ZrSiO4 Effect of ZrSiO4 particles on the wear properties of as-cast Al matrix particulate composites fabricated via various casting routes [Volume 5, Issue 4, 2019, Pages 171-177]