Application of response surface methodology for thorium(IV) removal using Amberlite IR-120 and IRA-400: Ion exchange equilibrium and kinetics

Document Type : Research Article

Authors

1 Department of Chemical Engineering, Collage of Engineering, University of Tehran, Tehran, Iran

2 Nuclear Fuel Cycle School, Nuclear Science and Technology Research Institute, Tehran, Iran

Abstract

In this work, thorium (IV) removal from aqueous solutions was investigated in batch systems of cationic and anionic resins of Amberlite IR-120 and IRA-400. In this way, the effects of pH, initial Th(IV) concentration and the amount of adsorbent were investigated. A Central Composite Design (CCD) under Response Surface Methodology (RSM) was employed to determine the optimized condition. The results showed that the maximum removal efficiency of Th(IV) onto IR-120 and IRA-400 either discretely or in combination, albeit with equal mass fraction, was determined as follows: 98.09% , 65.70% and 72.19% at pH=3.23, 6 and 4.07, initial Th(IV) concentration of 78.2, 30 and 55.4 mg.L-1 and 2.08, 2.5 and 2.2 g.L-1 of resin, respectively. The kinetic and equilibrium data were accurately described by the pseudo-second order and Langmuir models. The results showed that IR-120 is a suitable adsorbent for thorium removal from aqueous solutions.

Highlights

  • A novel PVA/TiO2/ZnO/TMPTMS nanoļ¬ber adsorbent was fabricated by the electrospinning method.
  • The effects of pH, initial Th(IV) concentration and the amount of adsorbent were investigated.
  • The properties of the prepared novel adsorbent were determined by SEM, FTIR and BET analyses.
  • The adsorption capacity of Th(IV) in a single system was reported.
  • The mechanism of Th(IV) adsorption was recognized.

 

Keywords


[1] D.I. Ryabchikov, E.K. Gol'braikh, The Analytical Chemistry of Thorium, Pergamon Press, Oxford, 1963.
[2] G.R. Choppin, Actinide speciation in the environment, Radiochim. Acta, 91 (2003) 645-650.
[3] J.D. Van Horn, H. Huang, Uranium(VI) biocoordination chemistry from biochemical, solution and protein structural data, Coord. Chem. Rev. 250 (2006) 765-775.
[4] A.R. Keshtkar, M. Irani, M.A. Moosavian, Removal of uranium(VI) from aqueous solutions by adsorption using a novel electrospun PVA/TEOS/APTES hybrid nanofiber membrane: comparison with casting PVA/ TEOS/APTES hybrid Membrane,J. Radioanal. Nucl. Ch. 295 (2013) 563-571.
[5] M. Metaxas, V. Kasselouri-Rigopoulou, P. Galiatsatou, C. Konstantopoulou, D. Oikonomou, Thorium removal by different adsorbents, J. Hazard. Mater. 97 (2003) 71-82.
[6] Z. Hongxia, D. Zheng, T. Zuyi, Sorption of thorium (IV) ions on gibbsite: effects of contact time, pH, ionic strength, concentration, phosphate and fulvic acid, Colloid. Surface. A, 278 (2006) 46-52.
[7] A. Hamta, M.R. Dehghani, Application of polyethylene glycol based aqueous two-phase systems for extraction of heavy metals, J. Mol. Liq. 231 (2017) 20-24.
[8] S. Chandramouleeswaran, J. Ramkumar, V. Sudarsan, A.V.R. Reddy, Boroaluminosilicate glasses: novel sorbents for separation of Th and U, J. Hazard. Mater. 198 (2011) 159-164.
[9] J. Ramkumar, S. Chandramouleeswaran, V. Sudarsan, R.K. Vatsa, S. Shobha, V.K. Shrikhande, G.P. Kothiyal, T. Mukherjee, Boroaluminosilicate glasses as ion exchange materials, J. Non-Cryst. Solids, 356 (2010) 2813-2819.
[10] A. Dyer, L.C. Jozefowicz, The removal of thorium from aqueous solutions using zeolites, J. Radioanal. Nucl. Ch. 159 (1992) 47-62.
[11] L. Weijuan, T. Zuyi, Comparative study on Th(IV) sorption on alumina and silica fromaqueoussolutions, J. Radioanal. Nucl. Ch. 254 (2002) 187-192.
[12] A. Nilchi, T. Shariati Dehaghan, S. Rasouli Garmarodi, Kinetics, isotherm and thermodynamics for uraniumand thoriumions adsorption fromaqueous solutions by crystalline tin oxide nanoparticles, Desalination, 321 (2013) 67-71.
[13] S. Abbasizadeh, A.R. Keshtkar, M.A. Mousavian, Preparation of a novel electrospun polyvinyl alcohol/ titanium oxide nanofiber adsorbent modified with mercapto groups for uranium(VI) and thorium(IV) removal from aqueous solution, Chem. Eng J. 220 (2013) 161-171.
[14] J.S.Kentish,G.W.Stevens,Innovationsin separation technology for the recycling and re-use of liquid waste streams, Chem. Eng. J. 84 (2001) 149-159.
[15] A.A. Khan and R.P. Singh, Adsorption thermodynamics of carbofuran on Sn (IV) arsenosilicate in H+ , Na+ and Ca2+ forms, Colloid. Surface. A, 24 (1987) 33-42.
[16] C.H. Lee, J.S. Kim, M.Y. Suh, W. Lee, A chelating resin containing 4-(2- thiazolylazo) resorcinol as the functional group synthesis and sorption behaviours for trace metal ions, Anal. Chim. Acta, 339 (1997) 303-312.
[17] J.P. Rawat, K.P.S. Muktawat, Thermodynamics of ion-exchange on ferric antimonite, J. Inorg. Nucl. Chem. 43 (1981) 2121-2128.
[18] D.C. Sherrington, Preparation, structure and morphology of polymer supports, Chem. Commun. 21 (1998) 2275-2286.
[19] J.H. Song, K.H. Yeon, S.H. Moon, Effect of current density on ionic transport and water dissociation phenomena in a continuous electrodeionization (CEDI), J. Membrane Sci. 291 (2007) 165-171.
[20] J.S. Park, J.H. Song, K.H. Yeon, S.H. Moon, Removal of hardness ion from tap water using electromembrane processes, Desalination, 202 (2007) 1-8.
[21] H.J. Lee, M.K. Hong, S.H. Moon, A feasibility study on water softening by electrodeionization with the periodic polarity change, Desalination, 284 (2012) 221-227.
[22] T. Ho, A. Kurup, T. Davis, J. Hestekin, Wafer chemistry and properties for ion removal by wafer enhanced electrodeionization, Sep. Sci. Technol. 45 (2010) 433-446.
[23] K. Dermentzis, Continuous electrodeionization through electrostatic shielding, Electrochim. Acta, 53 (2008) 2953-2962.
[24] B.N. Singh, B. Maiti, Separation and preconcentration of U(VI) on XAD-4 modified with 8-hydroxy quinoline, Talanta, 69 (2006) 393-396.
[25] S. Chandramouleeswaran, Jayshree Ramkumar, n-Benzoyl-n-phenylhydroxylamine impregnated Amberlite XAD-4 beads for selective removal of thorium, J. Hazard. Mater. 280 (2014) 514-523.
[26] A. Demirbas, E. Pehlivan, F. Gode, T. Altun, G. Arslan, Adsorption of Cu(II), Zn(II), Ni(II), Pb(II) and Cd(II) from aqueous solution on Amberlite IR120 synthetic resin, J. Colloid Interf. Sci. 282 (2005) 20-25.
[27] F. Semnani, Z. Asadi, M. Samadfam, H. Sepehrian, Uranium(VI) sorption behavior onto amberlite CG400 anion exchange resin:Effects of pH, contact time, temperature and presence of phosphate, Ann. Nucl. Energy, 48 (2012) 21-24.
[28] S. Rengaraj, K.H. Yeon, S.Y. Kang, J.U. Lee, K.W. Kim, S.H. Moon, Studies on adsorptive removal of Co(II), Cr(III) and Ni(II) by IRN77 cation-exchange resin, J. Hazard. Mater. 92 (2002) 185-198.
[29] M. Singh, A. Sengupta, Sk. Jayabun, T. Ippili. Understanding the extraction mechanism, radiolytic stability and stripping behavior of thorium by ionic liquid based solvent systems: evidence of ionexchange and solvation mechanism, J. Radioanal. Nucl. Ch. 311 (2017) 195-208.
[30] M. Elibol, D. Ozer, Response surface analysis of lipase production by freely suspended Rhizopus arrhizus, Process Biochem. 38 (2002) 367-372.
[31] M. Gavrilescu, Removal of heavy metals from the environment by biosorption, Eng. Life Sci. 4 (2004) 219-232. 
[32] F. Ghorbani, H. Younesi, S.M. Ghasempouri, A.A. Zinatizadeh, M. Amini, A. Daneshi, Application of response surface methodology for optimization of cadmium biosorption in an aqueous solution by saccharomyces serevisiae, Chem. Eng. J. 145 (2008) 267-275.
[33] V.K. Gupta, B. Gupta, A. Rastogi, S. Agarwal, A. Nayak, A comparative investigation on adsorption performances of mesoporous activated carbon prepared from waste rubber tire and activated carbon for a hazardous azo dye-Acid Blue 113, J. Hazard. Mater. 186 (2011) 891-901.
[34] V.K. Gupta, A. Mittal, A. Malviya, and J. Mittal, Adsorption of carmoisine a from waste materialsbottom ash and deoiled soya, J. Colloid. Interface Sci., 355 (2009) 24–33.
[35] T.S. Anirudhan, S. Jalajamony, Ethylthiosemicarbazide intercalated organophilic calcined hydrotalcite as a potential sorbent for the removal of uranium(VI) and thorium(IV) ions from aqueous solutions, J. Env. Sci. 25 (2013) 717-725.
[36] G.H. Mirzabe, A.R. Keshtkar, Application of response surface methodology for thorium adsorption on PVA/Fe3O4/SiO2/APTES nanohybrid adsorbent, J. Ind. Eng. Chem. 26 (2015) 277-285.
[37] T.S. Anirudhan, S. Rijith, A.R. Tharun, Adsorptive removal of thorium(IV) from aqueous solution using poly (methacrylic acid)-grafted chitosan/bentonite composite matrix: Process design and equilibrium studies, Colloid. Surface. A, 368 (2010) 13-22.
[38] I. Langmuir, The constitution and fundamental properties of solids and liquids. part I. solids, J. Am. Chem. Soc. 38 (1916) 2221-2295.
[39] Y.S. Ho, G. Mckay, Pseudo-second order model for sorption processes, Process Biochem. 34 (1999) 451-465.